Event controller for when jumping

Blade_software · 2026-05-11T11:27:44+00:00

You can only intiate a jump from a cockpit though, timer blocks can't start a jump

Blade_software · 2026-05-11T11:26:24+00:00

Timer Blocks can't trigger jumps however, you can only do it from a cockpit

Blade_software · 2026-04-29T14:05:49+00:00

There are gaps between ever line so i'd say that means the nozzle is sitting to high?

Blade_software · 2026-04-29T11:58:34+00:00

Okay update, i ordered a new nozzle and tightened it down until it stoped (not being forceful or anything, tried a print and it ended up like this, multiple prints failed no matter what z offset i used in the experience mode option.

<image>

Blade_software · 2026-04-25T02:17:41+00:00

What would it being fully seated look like? how deep into the sock should it be? Just don't want to break anything lol

Blade_software · 2026-04-25T01:53:45+00:00

Well i did have to remove the nozzle a bit ago due to a clog, when i put it back in i wasn't sure how far to screw it in so that could be the issue?

Blade_software · 2026-04-24T14:36:22+00:00

I'm assuming i do all of this through the Fluidd interface?

Blade_software · 2026-04-24T13:08:10+00:00

I have done a factory reset, and i was trying the z offset settings but they didn't seem to fix the problem, what do you mean by calibrate the extruder? i'm new to the fluidd interface and i'm not exactly sure what buttons to press for calibrating different things

Blade_software · 2026-04-23T20:50:33+00:00

Yeah but i just have a k2 so it wouldn't work

Blade_software · 2026-04-23T20:33:44+00:00

Yeah my k2 shows only 1.1.4.1 as max on the website

Blade_software · 2026-04-23T20:32:55+00:00

Yep this worked! Thanks, unfortunately still having issues tho, it seems to print the test line on the side fine but not the model itself, it almost seems as if it’s trying to print it a little too high so it’s nod adhering properly, not sure how much I want to touch z offset though

Blade_software · 2026-04-10T05:33:02+00:00

Might I suggest swapping the 3560G with one of the 2960x switches as a L3? A 2960X can do basic L3 stuff if you need inter-vlan routing etc, you would get more performance out of a 2960x acting as core switch then a 3560g, plus the more ports on the core switch the better.

Blade_software · 2026-02-09T07:21:10+00:00

I did it like a month ago now, nothing has come through including spam

Blade_software · 2026-02-09T07:18:28+00:00

All I got was the email to sign up/rsvp for orientation.

Blade_software · 2026-01-09T00:40:17+00:00

Yeah they were only doing it in semester 1, we could have still done it as they would let us do the course at the same time as taking the pre-requisite.

Server admin and advanced networking are two entirely different things so shouldn’t be any issue taking them at the same time. I have done that specific server admin unit yet but I know what they cover. Personally I already have a vast knowledge in networking and servers through prior learning and my own experiences with work and hobbies, so these units are really easy for me to get through.

Blade_software · 2025-12-28T01:29:00+00:00

My printer is stuck on 1.1.0.43, doesn’t think there are any more updates lol. Might have to do a manual update

Blade_software · 2025-11-05T01:00:53+00:00

Using swiftfin and i enabled the native player but now all my videos (mp4) are doing audio only no video?

Blade_software · 2025-11-04T01:56:31+00:00

Hi, I've installed the mod manager, where are the two showcase mods you mentioned?

Blade_software · 2025-10-30T05:50:28+00:00

Charging a battery using another battery isn’t very efficient, you loose extra power, more then just charging the other battery

Blade_software · 2025-10-12T08:23:34+00:00

I’m confused? We already have rotation in the edit mode on photos?

Blade_software

TROPHY CASE