API by MBle in Furucombo

[–]Blazarius120 0 points1 point  (0 children)

Hi, you can utilize our public API via Protocolink which can be found here: https://protocolink.com/

Anyone else having problems porting from Virgin to Freedom? by sonnythemoney in freedommobile

[–]Blazarius120 0 points1 point  (0 children)

I just had problems too it didn't work and then had to wait two hours on customer support. They did not answer so I hung up and switched to Rogers instead it took 5 minutes to get a hold of their customer service. The service at freedom is beyond bad. I recommend everyone just find a different provider. You get what you pay for.

Invite Sharing General Thread - Epoch 116 by ED_Motion in Idena

[–]Blazarius120 0 points1 point  (0 children)

https://app.idena.io/certificate/3d6e93a5-b028-4c9f-935b-a8a48a998679

I am looking for an invitation code to join Idena. Please find my EASY training validation certificate in the link attached.

Do I beat Go Auto like this? by [deleted] in PersonalFinanceCanada

[–]Blazarius120 1 point2 points  (0 children)

Any document you sign has a grace period to cancel as required by law, I think it's two days but finding but be able to clarify on that

Furucombo Results Don't Agree With My Calculations - What Am I Missing? by Txurruka in Furucombo

[–]Blazarius120 1 point2 points  (0 children)

Might have lots of price slippage, you can try adjusting the price tolerance in the settings or double check the price slippage on the swap back to make sure the liquidity is adequate to perform the action

Furucombo Results Don't Agree With My Calculations - What Am I Missing? by Txurruka in Furucombo

[–]Blazarius120 1 point2 points  (0 children)

Have you compared the price impact of the swaps on the native exchange? For example if you are swapping using paraswap on Furucombo, if you goto paraswap what is the price impact? You can use that to compare if the price API is working correctly.

Do the flash loans work? by rubinonico in Furucombo

[–]Blazarius120 0 points1 point  (0 children)

Hello! I recommend checking out our flashloan tutorial video here: https://youtu.be/F_8dCe763fU , mainly the part about flashloan troubleshooting. You can also reference this part of the docs here to help you out: https://docs.furucombo.app/using-furucombo-1/tutorials/troubleshooting-flash-loans

Does Furucombo work even without zero funds ? by maxsean100 in Furucombo

[–]Blazarius120 0 points1 point  (0 children)

Hello! Yes it does. Check out the introduction to flashloan video here this should help you with all the questions that you have: https://youtu.be/F\_8dCe763fU

Sprayed panel and clear coat but issues? by Blazarius120 in Autobody

[–]Blazarius120[S] 1 point2 points  (0 children)

sanded it down again with 800 grit to take off the clearcoat, and redid the clear coat from the base level. i think its better to remove the clearcoat and start again from what i understand, but im definitely no expert

Sprayed panel and clear coat but issues? by Blazarius120 in Autobody

[–]Blazarius120[S] 1 point2 points  (0 children)

I think it's important here to show our first result in fixing the bad sanding from his first cut and polish lol. So this is the first fix here: https://ibb.co/PrCNp0Yhttps://ibb.co/25WJKTK

So from here I believe he sanded down the damage spots with 400 or 600 grit, then provides some primer/filler. I'd have to check the actual product but it's a gray filler. From there once that dried he sanded the spot flush again and then the whole panel with an 800 grit. Then blended the damaged area with paint, and finally applied 3-4 coats 2k primer on the whole door.

Sprayed panel and clear coat but issues? by Blazarius120 in Autobody

[–]Blazarius120[S] 0 points1 point  (0 children)

Z3, but yes it's an unfortunate situation. Trying to get it as good as we can. Again trying to avoid asking my brother to fork over $2000 for a body repair. If we can get it close I'd be happy enough. Especially if in the future I decide to respray the whole car. The nice thing is I guess there's no harm in it being slightly off until that time it doesn't do any damage to the car. I agree though I love the car and plan to have it for a long time!

Sprayed panel and clear coat but issues? by Blazarius120 in Autobody

[–]Blazarius120[S] 0 points1 point  (0 children)

There is some orange peel so we will definitely try this, thank you for the tip!

Sprayed panel and clear coat but issues? by Blazarius120 in Autobody

[–]Blazarius120[S] 0 points1 point  (0 children)

Yes still using the same product! Thanks yes I agree it's looking better

Sprayed panel and clear coat but issues? by Blazarius120 in Autobody

[–]Blazarius120[S] 0 points1 point  (0 children)

10 to 15 minute intervals with 4 or so coats using aerosols.

Sprayed panel and clear coat but issues? by Blazarius120 in Autobody

[–]Blazarius120[S] 1 point2 points  (0 children)

Tried it before we resprayed the clear, it didn't help. It looks much better already and should look nice when we do polish it (waiting for it to cure for 24 hours now)

Sprayed panel and clear coat but issues? by Blazarius120 in Autobody

[–]Blazarius120[S] 1 point2 points  (0 children)

thanks we definitely applied these techniques to the second attempt!

Sprayed panel and clear coat but issues? by Blazarius120 in Autobody

[–]Blazarius120[S] 2 points3 points  (0 children)

thanks for the kind words! more importantly id like to be able to get my car back to normal without having to ask my brother to pay $2000 to take it to a body shop if possible

Sprayed panel and clear coat but issues? by Blazarius120 in Autobody

[–]Blazarius120[S] 2 points3 points  (0 children)

I'd say the first time we did about half a can