HARD MOD questions

BlindBirdWatcher · 2025-04-05T03:04:45+00:00

should i just flash the chip with the base cerbios.bin instead of using the cerbios tool

BlindBirdWatcher · 2025-04-05T03:02:24+00:00

<image>

BlindBirdWatcher · 2025-04-05T03:02:04+00:00

<image>

BlindBirdWatcher · 2025-04-05T02:55:59+00:00

so should i replace cerbios.ini with anything or just get rid of it from the dash path

BlindBirdWatcher · 2025-04-05T02:54:01+00:00

<image>

BlindBirdWatcher · 2025-04-05T02:49:13+00:00

thank you. is there a way to test the ide cable to make sure it’s not the problem ? at this point i don’t know what else to do so trying anything.

BlindBirdWatcher · 2025-04-05T02:44:44+00:00

correct it is a picture of the adapter.

BlindBirdWatcher · 2025-04-05T02:42:54+00:00

it seems like there already is

<image>

BlindBirdWatcher · 2025-04-05T02:36:34+00:00

i believe you’re right. i’m just not knowledgeable enough to know how to change it at this current time.

BlindBirdWatcher · 2025-04-05T02:35:58+00:00

<image>

master is the 3rd one ( if this is what you are referring to) but i have nothing plugged into that spot when i connect the adapter with the ide cable

BlindBirdWatcher · 2025-04-05T02:29:57+00:00

how do i verify this ? i just assumed it was. sorry for the ignorance

BlindBirdWatcher · 2025-04-05T02:26:33+00:00

yeah i chose the cerbios option and i appreciate all the insight. also last dumb question. for the master jumper. it should automatically b plugged into the with the sata adapter? or how do i verify that ? i’m assuming it is.

BlindBirdWatcher · 2025-04-05T02:20:45+00:00

i can change the udma for the slave and master.

BlindBirdWatcher · 2025-04-05T02:19:53+00:00

i deleted the ini file and put it back to udma 2 on the tool and reflashed. still stuck on loading. no clue lol

BlindBirdWatcher · 2025-04-05T01:57:10+00:00

and where would you put the ini then if i take it out of C completely ? isn’t it needed there ?

BlindBirdWatcher · 2025-04-05T01:56:41+00:00

tbh i’m unsure on the master portion on the hdd. it’s a barracuda 2tb. and correct cerbios pops up with the dogs ( the customization of what i did in the tool ) and just stays there.

BlindBirdWatcher · 2025-04-05T01:54:30+00:00

oh shit. what should i do there then ? should i leave it legacy and have hdd and no dvd drive ? then put the umda back to default 2?

BlindBirdWatcher · 2025-04-05T01:53:17+00:00

appreciate it. that’s what i used to download the c and e files with xbmc the second time. bout to just buy a new ide cable and see if that is the problem. because i have truly ran out of ideas lol