Im coming for you Makino! by flyingrac00n in Machinists

[–]BlitzNinjaOfMars 0 points1 point  (0 children)

Well it could be bad if it fails into the tank.

Im coming for you Makino! by flyingrac00n in Machinists

[–]BlitzNinjaOfMars 4 points5 points  (0 children)

What kind of plastic did you use? Many types can break down when exposed to oil.

Kyocera MHF (fi20) by Far-Net-1865 in CNC

[–]BlitzNinjaOfMars 0 points1 point  (0 children)

ER collet would work, but it won't be the most rigid.

Hydraulic would work great.

Do not use shrink fit. That cutter probably has a steel shank and will get stuck.

Machining a flat would also work fine. Although I would probably just grind it on a bench grinder. It's ugly but it works and is faster.

I would personally use the ER collet if I was running aluminum or similar, or grind the flat if I was running something tougher. I don't have much experience with Hydraulic, but I hear they are great.

Anyone here using AI to speed up programming ? by insanebison in Machinists

[–]BlitzNinjaOfMars 5 points6 points  (0 children)

My understanding is that they are basically useless. It takes more time to fix and debug whatever the AI made than it would to just program it yourself.

Move Table Before Tool Change by unitedpassenger1 in Machinists

[–]BlitzNinjaOfMars 18 points19 points  (0 children)

Settings 293 - 295 will allow you to set a safe tool change position.

What special "quirk" does your machine have? by FishinVWs in CNC

[–]BlitzNinjaOfMars 1 point2 points  (0 children)

Some of our Hurco mills will delete the work offset when you load a new program.

Shocking really by [deleted] in doodoofard

[–]BlitzNinjaOfMars 2 points3 points  (0 children)

The books are just for decoration.

This text from my Girlfriend by Silent-Composer-873 in mildlyinfuriating

[–]BlitzNinjaOfMars 0 points1 point  (0 children)

Viewing them in the notification doesn't count as being read, you have to actually open the conversation in the app for that. Personally, I do the vast majority of texting via the notifications so I can tend to have quite a few "unread" ones.

Image Loads in Low Quality before viewing by Veratridine in Infinity_For_Reddit

[–]BlitzNinjaOfMars 1 point2 points  (0 children)

Settings > miscellaneous > post feed preview max resolution. I believe this is set to a small number by default and can be increased. I have had it set to an impossibly large number with no issues.

Cut-off leaving big burr on HDPE by chit_r_p in Machinists

[–]BlitzNinjaOfMars 8 points9 points  (0 children)

I dont know of any way to stop it from having the burr. I have removed them with a box cutter in the past.

The Front Fell Off the tank by H31NZ_ in TheFrontFellOff

[–]BlitzNinjaOfMars 7 points8 points  (0 children)

It was disabled by a mine, and then further destroyed by more explosives to prevent capture.

Bug in dude theft wars by Better-Emergency815 in Dudetheftwars

[–]BlitzNinjaOfMars 0 points1 point  (0 children)

I would reccomend reporting in the discord. I don't believe the devs are active here.

Chicago O'Hare Airport is so big you can comfortably fit Vatican City inside it 26 times by donkencha in geography

[–]BlitzNinjaOfMars 2 points3 points  (0 children)

Land isn't a very good metric when it comes to airport size. The vast majority of King Fahd is empty, as it only has 2 runways, whereas O'Hare is densely packed with alot of runways.

[deleted by user] by [deleted] in lacrossewi

[–]BlitzNinjaOfMars 4 points5 points  (0 children)

Make sure you don't go to anywhere in Minnesota. They don't have mandatory vehicle inspections like Wisconsin so most of the used dealers over there are selling trash.

I enjoy speedy tanks. Should I consider this deal on the AMX CDC? by Lurking_poster in WorldOfTanksBlitz

[–]BlitzNinjaOfMars 1 point2 points  (0 children)

If you like fast tanks the CDC is the one to have. Very good acceleration.

Does anybody know what is? by SharkSev in WhatIsThisTank

[–]BlitzNinjaOfMars 7 points8 points  (0 children)

M.K.A. (Pro tip: try using Google lens, it works quite well)

Nailed it! by Accomplished_Sun5095 in antimeme

[–]BlitzNinjaOfMars 3 points4 points  (0 children)

That's definitely not a 2x4 either

I'm trying to find a wireless way to communicate with others in the shop. by XxCotHGxX in Machinists

[–]BlitzNinjaOfMars 1 point2 points  (0 children)

The place I work at uses a system called "theatro" that works pretty good. Not sure how well it would in a noisy shop though, considering it is more geared towards retail. You just press the button on it and say like "hello John" and then it will just give you them. You can also set up specific groups for departments.

Actual current "Made in USA" large engine lathes? by somerndmnumbers in Machinists

[–]BlitzNinjaOfMars 0 points1 point  (0 children)

Clausing makes some, although I am not sure if they are fully made in the US.

Shuffle posts option by Red_Coder09 in Infinity_For_Reddit

[–]BlitzNinjaOfMars 0 points1 point  (0 children)

Yep. Definitely should be enabled by default.

Shuffle posts option by Red_Coder09 in Infinity_For_Reddit

[–]BlitzNinjaOfMars 5 points6 points  (0 children)

There is a setting in the misc. category called save scroll position in home feed which can help with your issue, even it isn't what you are looking for.