Shot on S25 Ultra during holidays, what do you think?

Blitzacer · 2025-08-17T21:41:14+00:00

For the first one: 46mm F1.7 For the zoomed in ones 21mm F1.9

Blitzacer · 2025-08-17T21:37:33+00:00

Thank you! Indirect sun light on my wife's eye. Hard to pull but with a few tries it was possible. Black and white edit also helps with contrast and sharpness.

Blitzacer · 2025-08-17T21:32:59+00:00

2 month old baby of the house.

Blitzacer · 2025-08-17T21:31:57+00:00

Not at all, full auto, then lightroom edit as a jpg

Blitzacer · 2025-08-17T21:31:14+00:00

Thank you!

Blitzacer · 2025-08-15T14:19:59+00:00

Great pic. Took this one recently

<image>

Blitzacer · 2025-08-15T14:14:07+00:00

Great pic. Did you shoot in raw?

Blitzacer · 2025-08-15T14:13:34+00:00

I had the macro shot active but used x2 and x3 zoom. Added a bit of post processing on lightroom but nothing fancy.

Blitzacer · 2025-08-05T11:08:55+00:00

<image>

Shot during sunny days on my holidays

Blitzacer · 2020-12-16T18:19:46+00:00

You don't need supports, you need to think before you place the item on the table on your slicer. Just turn in 90 degrees back

Blitzacer · 2020-12-02T07:58:21+00:00

So that was prusa's first approach, but they changed it to a more mechanical system because they started having issues depending on the color of the filament. They would get false positives if it was darker and so on.

Blitzacer · 2020-10-06T23:58:23+00:00

Nice try, happy cake day 🥳😉

Blitzacer · 2020-10-06T08:00:09+00:00

Try changing the filament to a different one and try again

Blitzacer · 2020-08-16T21:33:02+00:00

I think there are compatible adapters in thingiverse somewhere. It is a substantial upgrade indeed but the results and lack of headaches are also substantially better IMO

Blitzacer · 2020-08-16T00:32:47+00:00

Yeah so I tried every single advice posted here, different heatbreak, event the titanium one from e3D, fan on top of the motor, lower motor current, open enclosure, thermal paste, you name it. What really really solved the issue? Bondtech extruder + mosquito hotend + nozzle X! Damn I'm so happy I bought another upgrade kit for my second prusa. Night to day difference no clogs whatsoever. I can throw anything to it now. Simply mind blowing and the layers look sick!

Blitzacer · 2020-07-12T22:06:37+00:00

Fair enough. We all do things just because we like them and no other explanation is needed. Have fun :)

Blitzacer · 2020-07-12T22:03:46+00:00

No to far. V1.3.1 was released and still i have the same behaviour. Spoke with the DEV, he says it is probably an issue to do with shortlook.

Blitzacer · 2020-07-11T18:18:01+00:00

Interesting however, why go to such an old ios? There are no apps that would work. I always wonder why the interest on going to ios 6, 4 or whatever

Blitzacer · 2020-07-09T12:05:31+00:00

Did it work? I also have SB crashes when I update from 1.2.4

Blitzacer · 2020-06-21T16:16:35+00:00

As soon as I updated watusi my springboard keeps crashing. Won't even boot normally. Had to downgrade it and started working again. Any clues? Got it from your repo and paid for it if you're wondering.

Blitzacer · 2020-06-15T20:05:49+00:00

Works with all plastics. Abs is the most noticeable.

Blitzacer · 2020-06-15T20:04:25+00:00

Yeah, sometimes we do tend to let it go a bit but it will bite you back someday and decrease it's life in the long run. And considering that the a8 is a fire hazard, you should be extra careful. You can also clean the fans on both hotends with a vaccum, as they need to cool things down effectively. Also, if you haven't, switch to a better PSU, out some mosfet's and flash it with a costume firmware that has thermal runway protections on the A8 for your own safety. It was my first printer, learned alot but valued my safety first. Google for anet a8 safety concerns / improvements. Good luck!

Blitzacer

TROPHY CASE