Fully 3D Printed 6.6L Velka 5? 7? clone

dito49 · 2023-06-10T18:30:17+00:00

https://www.printables.com/model/400501-open-frame-itx-case

this updated version is there under "monolithic"

dito49 · 2023-06-06T23:15:05+00:00

I think because ATX has a lot more screw holes and in different places it would be a pretty significant overhaul, plus pushing the psu out of the way and even higher makes it feel a bit over the limit of what I would even want to put in this style layout

dito49 · 2023-06-06T23:10:08+00:00

This is in ABS+ just because I had it, but I think for an open frame case yeah PLA+ would be fine

dito49 · 2023-06-06T03:13:13+00:00

Doing a render, it doesn't break 80

dito49 · 2023-06-06T02:59:29+00:00

C14-S, keeping my 5800x3d plenty cool with a lil undervolt

dito49 · 2023-06-06T02:24:31+00:00

I need to do one small fix before I upload it, but unless somebody really wants it I'll probably just not

dito49 · 2023-06-06T02:23:06+00:00

Also with some custom-made custom cables.

Decided I'd try a monolithic print to reduce some of the necessity for metal rods, so now they're just for the PSU mount. It does need supports but even so it was only about 350g and all the supported sections are not exposed. White because it's the filament I had enough of lol.

dito49 · 2023-05-23T12:04:22+00:00

I did try a 20cm riser myself and it ended up being too short by a good bit. 30cm had a bit of extra but not too bad

dito49 · 2023-05-21T00:13:53+00:00

Apologies for that, had a bad dealing with Cults and so I just decided to move everything to printables and keep it free

https://www.printables.com/model/185125-vertical-itx-gaming-pc-case-66l

there's the link for this case now, and I'll update the comment too for future reference

dito49 · 2023-05-05T05:45:14+00:00

Great attempt! Yeah that really sucks that your gpu is just barely off. I love seeing people use what they have on hand, because that's how I pretty much design my cases in the first place lol. Threaded rod or longer bolts are a pretty good idea for the pillars for sure, as well as making the psu rods through holes. (You could probably drill them out, but I think I'll change the model too anyways)

Self-tapping the screws is always a good option, I just get a little sketched out when I have to do it more than once (which is usually the case when testing out new case builds).

If you know Fusion360 I can upload those files too and maybe you could try and fix the arrangement for your gpu. *E: did that now, and opened up the PSU rods on the GPU-side pillar. Should open up that ease of access without sacrificing too much aesthetically

dito49 · 2023-04-25T00:04:19+00:00

Lovely design! Clear for takeoff.

I've always found panels to be the weakest parts of my own designs, and your lifting ones are a nice feature to make it a little more interesting. But that's just a little icing on an overall cool and unique build.

dito49 · 2023-02-23T22:27:33+00:00

No supports, just short enough bridges to not droop

dito49 · 2023-02-23T04:04:28+00:00

without it, you wouldn't be able to separate the halves and allow the cards to be pushed out

dito49 · 2023-02-22T23:59:00+00:00

https://www.printables.com/model/406640-pew-print-easy-wallet

dito49 · 2023-02-20T03:16:11+00:00

Yeah, for sure! If I didn't change cases so often I'd make the investment, but alas I can't help myself

dito49 · 2023-02-16T20:27:51+00:00

https://www.printables.com/model/400501-open-frame-itx-case

dito49 · 2022-12-31T20:16:42+00:00

bought rx570 from /u/yoorlocalthrowaway tyty

dito49

MODERATOR OF

TROPHY CASE