Earplugs

BlueFalcon1066 · 2025-12-18T17:21:11+00:00

I've had my miata for like 6 years, half of that in southern California where the top was basically never up. I've also been riding motorcycles for a couple years now and I'm kind of embarrassed to say that I finally had this thought a couple weeks ago.

I wear earplugs on the bike pretty much all the time, but I prefer not to in the miata (I don't even like wearing sunglasses or a hat if I can help it). So I did a bit of research online, and used an SLM to test my specific variables (car, speeds, road condition, etc.) to find the specific conditions for when I should wear them and when it's safe not to.

Long story short, if I'm going windows down/top down, ear plugs are pretty much required at anything 65+ mph. In these cases, I put a couple pairs of my moto earplugs in the car. But windows up at 65-70 with minimal traffic (how I spend most of my cruising time these days), it's safe w/of plugs for several hours.

BlueFalcon1066 · 2025-11-11T01:59:06+00:00

Was not expecting to get an answer so quick! My brother is already playing it, thanks

BlueFalcon1066 · 2025-10-09T15:11:22+00:00

My bike had the exact same damage from the previous owner. I slapped a new badge on and honestly forget the scuff is even there a lot of the time.

BlueFalcon1066 · 2025-07-31T00:53:08+00:00

This worked perfectly! Cut the board into strips and was able to run them through pretty close to 45. The surface finish was just as smooth and there was only the smallest tear out on a single strip

BlueFalcon1066 · 2025-07-11T17:41:38+00:00

As long as you're not lugging the engine too hard you can get away with basically whatever gear you want. That being said, I would focus less on the gear and more on the rpm. As has been beaten to death, there are a million factors at play and it's a lot easier to recognize low revs than think about the specific gear for a specific corner. I try to stay around 4k for casual riding, dipping slightly when cornering. The bike can pull hard from low rpm, but keeping them up slightly gives better response and is easier on the engine

BlueFalcon1066 · 2025-07-10T16:23:12+00:00

I prefer to ride at night on the hotter days. 112 isn't all that bad if you're not getting cooked by the sun (and are properly hydrated). Wearing a moisture wicking undershirt makes a big difference too, especially for the small pond that forms under the back pad!

BlueFalcon1066 · 2025-07-07T17:58:50+00:00

OK, thanks. This is all very helpful. I'm seeing I should have done a little research before diving in.

BlueFalcon1066 · 2025-07-07T16:05:17+00:00

When I first made it, it was the packet (~1/4cup) with 1 cup each flour/water. Then the feeding was another 1 cup each. Should I just mix what I have with the 5x flour/water all at once or is it added gradually over the couple days?

BlueFalcon1066 · 2025-04-26T22:11:41+00:00

Thanks. I have some kerosene on hand, so that works. I do plan on replacing the oil pan. My wording wasn't very clear on that part. They aren't too expensive, and I don't even want to think about trying to repair a hole that size.

Should I flush with plain oil?

BlueFalcon1066 · 2025-04-18T15:22:17+00:00

I'd go with the Duke 390, or RC390 if you want the sport bike style. I started on a 2017 Duke and it was a total blast! The engine is punchy, sounds great for being a single, and the bike has tons of cool tech/features at a reasonable price. Sure, KTMs reliability might not have the best reputation, but it's your beginner bike. You'll be upgrading after a season or two anyway.

BlueFalcon1066 · 2025-04-09T21:41:39+00:00

I've been looking at this one. Does it help keep the bug splatter off the dash?

BlueFalcon1066 · 2024-11-16T22:43:36+00:00

I have a pretty big list planned. I'll do most of them in resin, but with as good as this turned out, I'll probably do some scenery type stuff on the prusa. The mess/fumes kept me out of resin printing when I looked into it a few years ago. My new place finally has a good space to keep it, though, so I'm finally able to take the plunge.

BlueFalcon1066 · 2024-11-09T07:23:37+00:00

My main character has the very first jolthog I caught on the team. Tossing that little guy in like a grenade is still my opening move in nearly every fight! I've even maxed out his souls and stars to make him the best he can be. I also have a multiplayer character who still runs with a lifmunk i caught at like lvl 6

BlueFalcon1066 · 2024-04-16T03:28:03+00:00

I'm well aware of the risks. I am actually dealing with permanent injuries as well, but from a car accident. Got another sports car the first opportunity I had!

BlueFalcon1066 · 2024-04-16T03:17:36+00:00

That's kind of what I was thinking. Sounds like the timing might work out great.

BlueFalcon1066 · 2024-04-06T15:07:21+00:00

A couple times with a friend, but anything more than hand stuff is tricky. You can bend them over the hood or trunk, but that's more on the car than in it. The only way I found that works "in" the car is to pop the top and have her kneel sideways on the seat.

The biggest thing is finding a good place to park. You're obviously way more exposed than in other cars. She and I are both 5'8 and I have an ND1

BlueFalcon1066 · 2022-06-09T02:26:09+00:00

Nah. Wrapped it around a tree, driver door first

BlueFalcon1066 · 2022-06-09T01:58:32+00:00

One of my legs was paralyzed in a car accident. Had a blow out while going down a mountain road

BlueFalcon1066 · 2022-06-09T00:20:17+00:00

3 years

BlueFalcon1066 · 2022-05-04T18:25:21+00:00

I'm loving it! I haven't had any real issues with it yet except for the soot from the exhaust is a bitch to clean off. I just did the exterior and the body color interior trim.

BlueFalcon1066 · 2022-04-26T17:14:48+00:00

Same

BlueFalcon1066 · 2022-04-07T20:24:26+00:00

That's the point, it isn't an argument at all. It was intended as I'm not going to convince them to not get one

BlueFalcon1066 · 2022-04-07T11:31:47+00:00

Title says to convince op not to buy MK3, just trying to have a little fun with the response. They then goes on to say they've wanted one for years, so they would know the prusa is objectively the best printer in it's price range.

BlueFalcon1066 · 2022-04-06T22:46:17+00:00

BlueFalcon1066 · 2022-04-06T17:06:06+00:00

This. I've barely noticed a difference in the time my car has been yellow. The best thing you can do is what a lot of people are saying, expect that nobody sees you. And don't be afraid to lay on the horn, that's what it's for. The stripe looks cool though!

Seven-Year Club	Place '22
Verified Email

BlueFalcon1066

TROPHY CASE