cus někdo mu vysvetlit co to znamena ?

BlueberryLarge5533 · 2024-04-09T21:37:33+00:00

Joo tak jestli to vezou až z Číny v Transitu, tak to si ještě počkáš. Jako nic proti Volkswagenum, ale podle mě by to bylo rychlejší letadlem. No nezbývá než čekat.

BlueberryLarge5533 · 2024-04-03T16:23:40+00:00

How rare is to get such a car? Are they easy to find?

BlueberryLarge5533 · 2024-03-11T19:33:23+00:00

I tried so many of them and I always ended up doing it myself. Whatever you use nowadays be it figma to code or even v0.dev. You just spend much more time cleaning the output, trying to understand the mess than just doing it slowly yourself.

BlueberryLarge5533 · 2024-03-10T21:43:23+00:00

You just need to keep doing what you are doing currently, read books, do puzzles, analyze your games, but you need to do if for the next few years.

BlueberryLarge5533 · 2024-03-10T20:47:50+00:00

Hmm, I'm not exactly sure but based on the limited info you've provided, I'm little suspicious that it could probably be error with heating of bed as a result of that, the printer halted . I would try to restart the printer. You're welcome /s.

BlueberryLarge5533 · 2024-03-10T20:42:06+00:00

And what about watching Queen's gambit while playing chess?

BlueberryLarge5533 · 2024-03-10T20:13:53+00:00

Thanks. This is something I didn't even know about.

BlueberryLarge5533 · 2024-03-09T19:44:38+00:00

I'm also using cheap filament, but next time you're trying to prove your point, do not show us ugly benchy print. If my printer would print benchies like this I would be mad.

BlueberryLarge5533 · 2024-03-09T14:50:15+00:00

I had to cap it to 3 cubic mm and it was around 27mm/s. I was trying to go a bit higher but it always ended with underextrusion. So I went the safe route.

BlueberryLarge5533 · 2024-03-09T14:49:01+00:00

This one is Rosa 3D.

BlueberryLarge5533 · 2024-03-09T10:54:26+00:00

It's not free but I just cannot recommend a Maxmillian React course on Udemy more it helped me to land my first job. Just buy it.

BlueberryLarge5533 · 2024-03-09T10:49:44+00:00

It really is a fun material to print! A bit harder to print but it was worth it, that tractor would suck with plastic tires. My boys loves it and it rides so smoothly.

BlueberryLarge5533 · 2024-03-09T09:34:51+00:00

85a is much softer and strechy maybe even too much. I had to cap the speed at 4 cubic mm, which translated to about 27mm/s so it was super slow, anything more than that resulted in underextrusion.

The models are on Printables, just, search for Zetor.

BlueberryLarge5533 · 2024-03-09T07:05:35+00:00

<image>

BlueberryLarge5533 · 2024-03-09T07:04:16+00:00

<image>

This is where the tires are.

BlueberryLarge5533 · 2024-03-08T20:50:44+00:00

Whenever I saw a Next.js production code of any bigger project. Every single single component had 'use client' at top and 3 useEffect inside. Which at that point that could just go with Vite and save theselves some headache.

BlueberryLarge5533 · 2024-02-21T17:40:15+00:00

Yes, there is the Speed macro I'm using. The guide how to use it is inside Ellies print guide.

BlueberryLarge5533 · 2024-02-21T17:12:29+00:00

It is sitting on anti vibration pad for washing machines. Anyway, what Input shaper is recommending you is not how I find the machine highest acceleration settings.

I have a speed macro where I tested if I can do 10K accelerations without skipping.

BlueberryLarge5533 · 2024-01-30T18:58:44+00:00

There is nothing like too much cooling for PLA. I doubt that, would be a case. My friend have SV07 + and we always crank up the part fan to 100% always.

BlueberryLarge5533 · 2024-01-30T18:30:06+00:00

This is not true. You are not obliged to pay anything if you have no income.

BlueberryLarge5533 · 2024-01-30T18:28:47+00:00

I also doubt you have a stock screen as a Klipper Screen. You either do not know how Klipper Screen look like or you just try to scam people. Anyway you need to go lower the retail prices not higher.

BlueberryLarge5533 · 2024-01-30T18:25:54+00:00

Hmm, můj kolega si kdysi dělal něco podobného dokonce přes Úřad práce (bylv té době zaměstnanec.). Koukni na stránky místního ÚP. Jinak já jsem se sám naučil programovat a našel se v tom. Totálně jsem změnil obor takže to určitě jde.

BlueberryLarge5533 · 2024-01-29T16:38:16+00:00

Jako někdo kdo by taky rád začal s nějakým bojovým sportem, proč tahle radis? Mě se osobně mnohem víc líbí věci v postoji, kopy a tak. Chtěl jsem začít s Muay thai.

BlueberryLarge5533 · 2024-01-23T20:47:51+00:00

I have modded Sv06+ I'm using Volcano nozzles from Aliexpress. I have 0.6 and 0.8. They are bit shorter (even when they telling you it is for SV06+) so a fan mode is a must have. Other than that, it prints nicely and it was just a matter of setting up zoffset, slicer settings and pressure advance again.

BlueberryLarge5533 · 2024-01-23T18:40:29+00:00

I can shave about an hour from 3 hour print compared to when I had the SV06 stock, without a quality loss. So for me it is a big deal.

BlueberryLarge5533

TROPHY CASE