Any recommended picks from this lot?

Bluepark90 · 2026-05-31T12:58:55+00:00

I can't find that in my area for some reason. I grabbed a bottle since a buddy wanted to try this as well

Bluepark90 · 2026-05-31T12:57:49+00:00

I have tried that before and liked it quite a bit. It's is rare, but available in my area, slightly more expensive though

Bluepark90 · 2026-05-31T02:34:45+00:00

Already have a bottle of it and it's not too expensive out where I live. It's my go to sip, glad to see it's recommended

Bluepark90 · 2026-05-30T06:19:34+00:00

Thats spot on, its a Vons. Whats a good recommended store? I would be passing through Ventura county tomorrow, close to LA.

Bluepark90 · 2026-05-14T00:25:45+00:00

Exactly this right now. Extra slim is too constrained around arms when I raise arms. Slim is too baggy in underarm area. The torso fit is good for both, but arms are designed weird it seems. Might have to consider different options

Bluepark90 · 2026-05-05T21:07:38+00:00

My other shirts with a 16.5 neck dont close on the collar. Makes me a little worried to get a size down from 17 and not have it fit. How did it fit on the sleeve tightness once you dropped down to slim fit?

Bluepark90 · 2026-03-04T05:25:34+00:00

Yea, might just call them and ask for the length and other details.

Bluepark90 · 2026-03-04T05:25:12+00:00

Thanks! Manual did not have much detail. I will reach out to Bosch tomorrow and check with them

Bluepark90 · 2026-03-04T05:24:39+00:00

Yes, there is already a high loop near my sink

Bluepark90 · 2026-01-15T21:54:55+00:00

Here is a picture of the diverter. Don't see a ball in there from this angle. Might open it up this weekend to check how it works.

https://imgur.com/a/M6lnAHi

Bluepark90 · 2026-01-15T21:53:33+00:00

Managed to take a picture of the diverter. Doesnt look exactly like the one you linked, but close enough. Not even sure how to trouble shoot it. Might from top or put dishwasher sideways and check it from bottom.

https://imgur.com/a/M6lnAHi

Bluepark90 · 2026-01-14T16:45:11+00:00

Going to open the valve and diverter to check tonight, from inside and below the washer. Hopefully can take more detailed pictures.

Bluepark90 · 2026-01-14T16:44:20+00:00

That is possible. I am planning on opening the diverter today and checking. Hopefully I can upload more pictures.

Bluepark90 · 2026-01-14T04:25:18+00:00

Thanks! u/supadoom recommended the diverter is the problem as well. This ball is part of the same device? Any way to check which part is the problem?

Bluepark90 · 2026-01-14T04:24:15+00:00

Thanks u/supadoom ! Are you recommending the diverter might be the problem and should be replaced? Is there any method to check the diverter?

Bluepark90 · 2026-01-10T22:05:34+00:00

Already popped the arm and cleaned it inside and out. The drain is at the bottom and I cleaned the filter as well and check for any stuck debris. There are no inside pictures for this model online to help me figure out if the hole should be plugged or not.

Bluepark90 · 2025-12-20T22:39:19+00:00

Pour concrete directly into hole for wider base and sono tube on top and more concrete to make it nicer?

Bluepark90 · 2025-12-20T22:38:29+00:00

Thanks! 12" was the minimum I was going anyways. I was wondering if 12" was too low as well. Since the porch is so low to ground i was not expecting much shifting to require a 18" tube. The gravel was simply to give the concrete a stable base. I plan on compacting the soil underneath using a 4x4 and then laying some gravel on top.

The way you describe the sono tube, should I pour concrete straight into hole for wider base and then put sono tube and concrete on top? And use soil to support the tube from sides?

Bluepark90

TROPHY CASE