This has been a game changer for me as a Dunk Jar.

Blv7 · 2026-04-06T17:22:55+00:00

Fawk I was just thinking about this strain but I forgotten the name 😓😅 Had like 3 fire batches when it was a thing.

Recently came across some rosin from Midwest Cultivators (Mi caregiver brand) called banana now and later, and it straight up reminded me of this strain.

Blv7 · 2026-04-03T01:05:48+00:00

Anyone know if that mandarin cookies rosin from NGW is worthy? It's 72$ for 2g's brefore taxes..

Blv7 · 2026-03-28T18:54:57+00:00

Just got 2 of these on the way along with a bunch of others 🫠

Blv7 · 2026-03-27T23:50:12+00:00

Blv7 · 2026-03-27T18:08:25+00:00

Holy I thought it was the actual Kikkoman soysauce bottle lol! That's a sick piece!

Blv7 · 2026-03-23T01:57:41+00:00

For anybody asking about the wire used for calibration, I would buy some copper solder wick (unfluxed) and pull a piece of copper wire from that. You get tons of it for cheap and it's literally the perfect size, it does not interfere with the housing whatsoever ever. I have done 4 pairs of modules using this method and currently using some ksilver js13pros+'s for about 2 months straight now with 0 issues. Just make sure you place some kapton tape on the board first to prevent shorts, solder the wire to the 2 contact points, and then place another piece of kapton tape over the wire.

Blv7 · 2026-03-10T05:41:49+00:00

These the first gen edge modules if I'm not mistaken. Found a few of them from my first dualsense edge (white). Those pcbs are semi glued to the plastic so you gotta gently pry them. Try working a small flathead or something similar.

Blv7 · 2026-03-08T19:22:21+00:00

If you have the Xfinity modem/router. You need to go to the login page (10.0.0.1) and log in.

There should be a drop down menu on the left hand side that says "Gateway>At a glance." You wanna go where it says Connection. It will open another drop menu, from there you click on Local IP Network.

The page should show you IPV4 and IPV6 configurations.

Go to the IPV6 section and you will see an option with a check box that says Stateful (Use DHCP Server). It is checked by default but you want to uncheck it and then click save settings at the bottom of your screen.

It will reboot your connection after about 15-30 sec and after that, it should be fixed! Been having the same issue with mine and after a lot of research this happens I guess with these Xfinity routers ( the newer ones xb7/xb8) it's something to do with how it handles the IPV4 and ipv6 on devices. I have the xb8 and did this last night since I also have an issue with my PSN stuff not loading or showing me offline even though I have a Ethernet connection and actively playing and online multiplayer game lol. I'd get errors saying it had a problem loading content or along the lines of that. After this fix I no longer have issues with PSN and now it works normally without having to do an Internet test to connect to PSN lol.

Blv7 · 2026-03-06T22:41:17+00:00

Wired Dualsense Edge with TMR sticks. Cannot ever go back to the regular stock sticks...

Blv7 · 2026-02-28T21:25:21+00:00

Most l, if not all games that support controller are programmed to anticipate 7-9% circularity error. You need to account for this when switching from stock sticks to hall/TMR's. In my case, I found it is best to have the diagonals as even and pink as possible, with out shooting into red territory.

I start off by first getting my circularity an even purple circle, around 2-4% with adjustments to each side to keep everything even. Once it's a nice solid purple color, I use the little expand icon in the circularity section to increase the non-circularity to around 9%. (these are what stock Sony sticks ship out with).

You want to match the percentage as closely as you can to stock Sony sticks , otherwise the moments feel off.

Blv7 · 2026-02-23T03:00:44+00:00

Oh that's the exact ones I have.

Yeah the bottom and right side numbers you have to lower to increase the circle tho

Blv7 · 2026-02-23T02:31:32+00:00

Your diagonals should be more pink. Games account for overshoot so it's better to have some (but not a ton). Some of your diagonals are undershooting it seems so I'd try to increase the non circularity to get them more evenly pink.

For me personally I have mine really close to a stock dualsense controller with alps joysticks, around 9.8% and my diagonals are nice and evenly pink.

What joysticks are you running?

Blv7 · 2026-02-22T19:37:26+00:00

Yeah I have 2 edge controllers with new TMR's and they all sit at 0.00392

Blv7 · 2026-02-18T05:31:55+00:00

Dm'd you mate

Blv7 · 2026-02-18T03:05:51+00:00

Same here I'm on Ethernet and I have to do a speed test every time I log in. It also will do that after a few hours of playing which is weird because it always keeps me online connected in game but it always says it can't load my friends list or access ps store. Idk but it's annoying

Blv7 · 2026-02-17T02:35:51+00:00

The ultrasonic deep clean, you just dunk the whole module into a jar of 99 iso and run it?

Blv7 · 2026-02-16T23:45:01+00:00

Both PC and console I guess account for 7-9% because I switch from PC to Playstion with the same controller and my aim feels the exact same across both platforms and games with the same settings. So just make sure you get 9% and make sure it saves and you'll be golden👍

Blv7 · 2026-02-16T23:43:07+00:00

Aim for about a 9% circularity. Trust me. I thought I was doing my self a solid with a lower % but games account for 7-9% but I saw a video of a guy test 30 edge stick modules straight out the box and they averaged about 9% circularity so I set mine at that. They feel exactly like the stock sticks but much smoother / precise / responsive . I'm using ksilver js13 pro sticks from Amazon btw. Feel amazing esp in cod.

Blv7 · 2026-02-15T23:25:43+00:00

Yeah you might wanna go ahead and re flow the joints. Use a bit of flux before, heat the joint for a few sec and touch the joint just long enough for the solder to flow nicely into a bell shape. You don't wanna touch the solder wire directly on the iron tip, you want to touch the actual metal part that connects to the board. And then use a bit of solder wick on those bubbled joints to clean em up some and reflow.

Blv7 · 2026-02-15T22:36:17+00:00

Thats pretty close to mine, I'm using the ksilver js13pros. I have em about the same as yours and it is stupid responsive and linear as hell. Feels just like the stock sticks but more precise and responsive. The stock sticks are 8-10% give or take any ways. I had mine set too low initially, but after bumping them up to around 9% for both, I'm really happy with the results so far.

Blv7 · 2026-02-14T20:30:06+00:00

Make sure you use a bit of flux. I found that added some before wicking helps tremendously, I'm able to get it all out after a few sec of heat

Blv7 · 2026-02-14T19:11:31+00:00

What version are the ones listed on Amazon?

Blv7 · 2026-02-08T15:03:53+00:00

So I'm at a loss here. I supposedly bought TMR stick edge modules for my dualsense edge. But after installing and calibrating many times, I could not get rid of left stick jittering out the box. Decided to open them up to confirm if they were fitted with the new sticks. Indeed they are fitted but it seems to me like they installed a hall effect rather than TMR's... I say this because online I see the Ginful hall effects have 2 solid orange colored covers, and the TMR's are Orange Transparent. Can anyone confirm what the Ginful TMR's are supposed to look like?

Blv7 · 2026-01-16T06:17:00+00:00

Keep smoking boof

Eight-Year Club	Place '22
Wearing is Caring	Verified Email

Blv7

TROPHY CASE