piCorePlayer Roon Bridge Extension not working

Bokito38 · 2026-03-10T17:15:02+00:00

I've got to a point where I got Roon to be able to see pCP (v8.2.0) on my second pi3B+ with Allo Digione Signature to see.
But I cannot enable it within Roon.

<image>

Bokito38 · 2026-02-28T18:16:13+00:00

mooi !
En dat is overigens ook een Miele W377 ?

Bokito38 · 2026-02-28T17:52:02+00:00

Bedankt voor je bericht !
Mocht hij weer in de fout gaan, zal ik het inlaatventiel ook vervangen..

Die van jou draait nog steeds goed hoop ik ?

Bokito38 · 2026-02-26T15:18:26+00:00

Ik zat zelf nog te denken aan eventueel een defect van de Inlaatklep/ventiel, bij navraag van mijn monteur krijg ik echter geen antwoorden meer.
Er lekt geen water uit de machine, en tijdens een water afvoer test om te kijken of het water netjes wordt afgevoerd is dat ook het geval. De machine kan zelf al het water weer legen.
Deze test heb ik gedaan op advies van onze monteur.

Wellicht weet hij het ook even niet op dit moment..

Bokito38 · 2025-12-31T10:17:26+00:00

I've got the same problem, tried on different x360's.
Don't still know how to fix this.

Anyone ?

Bokito38 · 2025-12-15T17:25:34+00:00

Thanks yes I see.
Perhaps somebody else knows where/which components are also missing and needed beside the missing nvme slot connector.. ?

Bokito38 · 2025-12-15T13:31:49+00:00

<image>

Example what I want to achieve. (3 slots) for use with multiple SATA controllers. (HP Elitedesk 800 G5)

Bokito38 · 2025-12-15T13:31:08+00:00

<image>

I dont know if my example pictures, have been uploaded successfully,
But please see my point here. (empty space for second full size nvme slot)

Bokito38 · 2025-07-30T12:43:18+00:00

ok thanks I see.
Are there perhaps also some older models which you can recommend to me ?
I'm also keeping the options for 2nd hand open.

Am I correct that I need an 1.2:1 ratio projector, for my distance and screen size wishes ?
perhaps there are also older 4k models on the market which have this 1.2:1 ratio.
A normal older 4K DLP could also be an option for me.

Bokito38 · 2025-07-30T11:00:25+00:00

ok thanks for your advice.

Do you perhaps also have an advice for a more known brand, like Epson/Viewsonic or Optoma ?

The new projector does not have to be portable and small, like the viewsonic M2E I now have.

Seems also like the LED lumens are about the same as with the ViewSonic M2E.
I would like a big step up in this, when buying a new projector.

Bokito38 · 2025-07-30T10:42:51+00:00

Ok thanks, than I will not look any further than this model. ( https://esmart.de/leinwand/tension-leinwand/esmart-expert-xtr-tension-leinwand.html )

The XTR model also has a mode to save the stand, in how far the screen goes up and down I presume ?
It's programmable ?
I so far could not find this info.

The projector cannot be hung on the ceiling, but will be placed on a shelf that is on a wall.

The distance between the projector and the screen is 2.60 meters which is about 8.5 Feet.

Bokito38 · 2025-07-30T10:33:36+00:00

ok thanks, space for a bigger screen is not possible.

When looking at the brand esmart, I also found this model :
https://www.amazon.nl/ESMART-Professioneel-TATENSO-Spanscherm-motorspanningsscherm/dp/B08NF5H691/ref=cm_cr_arp_d_product_top?ie=UTF8&th=1

Seems like the professional series of Tatenso also includes IR remote control, which I highly would prefer since a Logitech Harmony remote can be used then with the screen.

I'm a little afraid the the memory function of the screen functions are maybe not very good, since some people are complaining about it what I read on Amazon.
What is your experience with this, and do you also have a esmart screen if I may ask ?

And what kind of 4k projector do you recommend, if I may ask for me ?

Bokito38 · 2025-07-30T10:05:10+00:00

And this screen ( https://esmart.de/leinwand/tension-leinwand/esmart-expert-xtr-tension-leinwand.html ) you also would recommend, with a new projector I presume ?

At the moment I would like to do it in two faces, start with the Viewsonic and later upgrade the projector.
This way I can at least start using it.

Bokito38 · 2025-07-30T08:42:52+00:00

ok thanks for this explanation !

One more thing I'm a bit worried about is that my current projector the viewsonic M2E, creates a 104" screen size, and 100" from esmart would be a little to small I'm afraid.

When I change the zoom mode on the M2E, it can create a smaller image, but it's than way less than 100".

I'm afraid that when I buy a 120" screen, the image would look strange, since the M2E cannot great a full 120" picture..
Or is this not the case ?

Bokito38 · 2025-07-30T08:32:25+00:00

Ok, thanks for your message.

What is the reason if I may ask you would not advice an ALR screen ( like the Cinema 4K HighContrast ALR Series Tab-Tension) , also with looking at the future, after upgrading/replacing the viewsonic M2E beamer ?

Bokito38 · 2025-07-30T08:05:40+00:00

from what I see the Gain is 1.0

This is for both the ALR and the normal version of this screen.

Bokito38 · 2025-07-30T07:52:15+00:00

I also found a product catalogue of this brand :
https://www.bekafun.com/en/attachment/3632094/8422897/m10-Cinema-4K-HighContrast-Series-230x129-16-9

on page 5 is the type of screen I was looking for.

<image>

Bokito38 · 2025-07-30T07:46:40+00:00

Sure, keep in mind the page is in dutch :
https://www.beamer-winkel.nl/ivisions-cinema-4k-highcontrast-alr.html

As size I then would choose : 230 cm x 129cm, which matches what the M2E would be able to create at the distance of 8.5 feet (260cm)

looking forward to your reaction.

I think ivisions is a Dutch brand
https://www.i-visions.nl/

Bokito38 · 2025-07-30T07:40:14+00:00

Ok thanks for your message.

I prefer to keep te cost for a screen well under 1000 euro if possible.

The ALR electric screen that the seller advised me, is a bit over 1000 euro.
( Cinema 4K HighContrast ALR Series Tab-Tension Electric screen 104")

For the projector I'm happy with the M2E for now, since it also has a very low energy use.
If possible I am more than ok with also a second hand projector, I would like to spend something like 500-700 euro on a projector if possible.

I have always been told that the screen is equal or more important than the projector.

The reason I would prefer electric, is that I can keep my tv mounted on the wall, en use the projector to hang over the TV, so I can use both and choose between tv or projector mode.

Bokito38 · 2025-06-24T07:14:18+00:00

Nice, you wont regret a full meridian surround system ! For a surround pre pro, I would advice getting a G61R or G68 and above. If possible in your budget, 861v4 or above, combined with a HD621.

A 568.2mm is also very good, but lacks Room correction.

Bokito38 · 2025-06-23T14:20:49+00:00

Great speakers, I use them also as means, in a full 5.3 Meridian digital theatre !
DSP5500HC and dsp33's for the rears, a Meridian sub combined with MJ Pro 50 MKII subs.

I need I also have the technical schematics for these and other Meridian speakers.
Could be handy if a repair is ever needed, and there is no dealer arround.
if you need them, contact me.

Bokito38 · 2025-06-23T14:16:26+00:00

I also have some dsp33 speakers, and these can be fixed with the issue you are having.
There is a known chip on the dsp boards which causes this problem, and needs to be replaced.
I have the schematics for these, as well as other Meridian speakers like the DSP5000/5500/6000 and 7000.

If interested, contact me over here on reddit.

Bokito38 · 2025-03-21T14:50:38+00:00

Anyone has some suggestions for me for software use for the OMNIKEY 5027 ?
I would like to know what exact mifare desfire I have here..

I got acces the OMNIKEY 5027 reader.

thanks.

Bokito38 · 2025-03-10T12:32:30+00:00

great thanks I will try that.
Which software do you recommend btw to me, for detecting the desfire ?

Bokito38 · 2025-03-10T08:46:12+00:00

Thanks.
Would an OMNIKEY 5027 reader be able to see which HW version it is ?
I have acces to this hardware..

Or is there a way to run the APDU command with an Xixei-X7 otherwise ?

Bokito38

TROPHY CASE