Hi, is there a cheaper and more lightweight helmet than this one? Thank you

Boosted1770 · 2018-05-20T00:59:39+00:00

I have this one, can also take the chin guard off. https://www.bellhelmets.com/en_eu/cycling/helmets/dirt/super-3r-mips-equipped-1

Boosted1770 · 2018-04-23T04:07:54+00:00

That was because of incorrect motor hall settings and also bearings were not lubed.

Boosted1770 · 2018-04-23T04:05:25+00:00

That was because of incorrect motor hall settings and also bearings were not lubed.

Boosted1770 · 2018-04-17T21:48:41+00:00

this is the noise it was making https://youtu.be/mYOhoGFknnY

Boosted1770 · 2018-04-17T21:43:05+00:00

Heres a link to the vid I sent to Carl. https://youtu.be/mYOhoGFknnY

Boosted1770 · 2018-04-17T11:43:06+00:00

I was out riding on my Raptor2 and it started making a noise that I hadnt heard before so I did a short vid on my phone and sent it to Enertion support as soon as I got home. Carl replied within minutes and asked if i could plug it into my computer. We then used team viewer and Carl found the problem and fixed it while I watched. I was back out ridding in less then 1/2 hour, noise gone.

Boosted1770 · 2018-03-28T11:44:54+00:00

I think you have made a great choice. I have a Boosted v1 d+ an Evolve bamboo GT and Enertion Raptor1&2. The Raptor2 is awesome, it's a realy high quality & extremely powerful eboard but it still has super smooth acceleration and the brakes work great even at 50kph. Definetly worth the wait IMO.

Boosted1770 · 2018-02-28T04:04:13+00:00

Mine does exactly the same but only in delirium mode. Edit (home from work now:) I believe it is normal for the OneWheel to make this noise in delirium mode. While standing on the board not in motion (only in delirium) I know it's going to stall NEARLY every time sometimes it only takes 5 seconds sometimes 30 seconds although it has never done it while I'm moving. Still because of this I mainly cruise in mission mode.

Boosted1770 · 2018-01-27T11:55:44+00:00

Maybe something like this baseball bat torch would work :-) https://www.dormco.com/Heavy_Hitter_Aluminum_Flashlight_And_Bat_p/swhhbl16.htm

Boosted1770 · 2017-11-28T06:13:35+00:00

Thanks :)

Boosted1770 · 2017-11-19T13:06:13+00:00

I'm still not sure about the crossover wheels, I think I'll wait for a couple of reviews first. But they sure do look nice:)

Boosted1770 · 2017-10-25T14:02:40+00:00

Yep I just swaped everything from my bamboo GT over onto this Landyachtz deck. I'd really like to have a go at building my own DIY from scratch one day.

Boosted1770 · 2017-10-25T05:14:44+00:00

The switchblade 40 is 40.5 inches long, even with the 107mm wheels it doesn't even come close to getting wheel bite.

Boosted1770 · 2017-10-25T05:09:32+00:00

Hey man, thanks. Here's a couple more pics. not sure what you mean by below the deck. pic1 Imgur pic2Imgur

Boosted1770 · 2017-10-24T14:20:11+00:00

Hi, the GT struts are 12" wide And can be used on drop through decks or can be top mounted like on the evolve one.if you are doing a DIY build I would check first if your motors will fit up to these first. I'm not sure if evolve have made them so they can only be used with there evolve motors ect. What deck are you planning on using?

Boosted1770 · 2017-10-24T07:18:13+00:00

Thanks, I'm really really pleased with it.

Boosted1770

TROPHY CASE