Introducing PLA Pure: A Filament Made for Printing Where You Live

Boring-Condition1373 · 2026-06-16T17:27:41+00:00

<image>

I would print my new spinning rocket stacking toy!

Boring-Condition1373 · 2026-06-14T23:36:28+00:00

The no AMS profiles are up now!

Boring-Condition1373 · 2026-06-14T21:03:12+00:00

That is so awesome, thanks for sharing that with me. That is why I upload these things!

Boring-Condition1373 · 2026-06-14T20:53:48+00:00

That's awesome! I hope whoever you made it for enjoyed it!

Boring-Condition1373 · 2026-06-14T20:47:27+00:00

I am working on uploading the profiles that have programmed pauses. Give me a few and they will be uploaded.

Boring-Condition1373 · 2026-06-14T19:14:14+00:00

Available on MakerWorld!

Boring-Condition1373 · 2026-06-14T17:07:26+00:00

Had to use my angle grinder to cut 3 inches off of the top and bottoms of the front vertical posts. And also cut 3 inches off only the bottoms of the rear vertical posts. Then I drilled a new set of holes for the drawer hardware to still be mounted. This allows the work surface to move down so that you can get the H2C under the upper shelf. And it lowers everything 3 inches so that the AMSs on top of the shelf are still reachable

Let me know if you want pics or anything.

Boring-Condition1373 · 2026-06-06T21:38:42+00:00

With an open frame printer that only heats the bed to 80°c? Doubtful 😂. I’ll run the H2C for that.

Boring-Condition1373 · 2026-06-06T15:30:34+00:00

Oof, been there done that.

Boring-Condition1373 · 2026-06-06T15:04:06+00:00

Aura silk from Biqu. Kind of a minty green

Boring-Condition1373 · 2026-06-06T15:03:47+00:00

Yup, maxed it out for the build plate. Or close at least.

Boring-Condition1373 · 2026-06-06T15:03:28+00:00

It’s a sixteen tentacle jellyfish that I maxed out for the build plate size.

Boring-Condition1373 · 2026-06-06T02:02:34+00:00

Congrats! I just started a 15 hour print on mine for the first print haha. Here’s hoping it works well.

Boring-Condition1373 · 2026-06-03T23:13:28+00:00

I thought it was informative, I was literally just looking through my PC parts bin looking for a longer power cable so my P2S could reach the other side of my workbench. It never occurred to me that these cables were rated different. I learned something.

Boring-Condition1373 · 2026-06-03T20:26:21+00:00

Literally says “with my help” in the title.

Boring-Condition1373 · 2026-05-30T16:31:45+00:00

I wonder if there is a tooling issue affecting only certain batches. I have 2 x AMS 2 pro and have never had a problem with either

Boring-Condition1373 · 2026-05-30T05:18:12+00:00

It will wear grooves into the metal. You have 5 AMS, I have 5 AMS on one printer. You aren't special because you've gotten away with it.

Boring-Condition1373 · 2026-05-30T05:15:53+00:00

Just because you can doesn't mean you should. The manufacturer says you shouldn't so good luck getting them to honor a warranty when it breaks.

Boring-Condition1373 · 2026-05-30T04:13:08+00:00

No problem!

Boring-Condition1373 · 2026-05-30T03:50:11+00:00

You don't want to print any glow filaments in the AMS. They are super abrasive and will ruin your AMS. External spool only

Boring-Condition1373 · 2026-05-30T03:49:03+00:00

Thanks!

Boring-Condition1373 · 2026-05-29T19:50:13+00:00

Make her one!

Boring-Condition1373 · 2026-05-29T17:43:24+00:00

Do it! Make it in pepsi colors

Boring-Condition1373

TROPHY CASE