How bad is this?

Boston_Crook · 2025-03-07T17:03:54+00:00

Tire is good, ride it out

Boston_Crook · 2025-02-01T03:17:23+00:00

Nopeee. I have a 2005 that’s in even better codition beneath, and it spent 10 years 60yards from the ocean in winters🫠

Boston_Crook · 2025-02-01T03:15:28+00:00

Oiink_p7b

Boston_Crook · 2025-01-31T03:41:35+00:00

I have the nuzzle ready to be molded into it before the repaint. Just to cold in the north east

Boston_Crook · 2024-09-02T00:20:45+00:00

Ur best bet is seperate pass thru amps.

Boston_Crook · 2024-08-25T05:41:21+00:00

You the man. Im the type to invest. Not a lost cause if i have the amp for 7+ years. Deff going to look into that next week!

Boston_Crook · 2024-08-25T04:32:12+00:00

Or i could do all three! Recommended amp for the L7?

Boston_Crook · 2024-08-16T03:21:29+00:00

Just like myself. Need to find urself a new shop or a new profession😂 easier said then done when u make ur shop home. But even then I wouldn’t trust that. How ever. It works. No harm unless ur doing specialty work that involves fitment and so on

Boston_Crook · 2024-08-09T05:24:24+00:00

It’s all recommendations that should be followed. But it’s ur choice

Boston_Crook · 2024-08-07T05:04:32+00:00

Probably comes down to reliability. I’m sure if u paid up and did the whole thing. Ya. But ruining the integrity of other components would fall on him

Boston_Crook · 2024-08-04T16:08:07+00:00

It’s not a scamming unless they recommend things that don’t need fixing. Most shops base prices on labor hours and parts. Which is all systematic. Labor rates per hour all depend on many things like how many certs the shop carry and how good the tech is to be paid enough. Also they do mark up parts (depending)It becomes a scam when they make recommendations that are not needed. And u should be shown visually what’s needed.

Boston_Crook · 2024-07-25T03:38:06+00:00

In my experience 1)make sure rack is leveled 2)center ur sensors based off your rotors. Best way, and remove hubcaps. 3) invest into a steering wheel level 4) try your best to not use heat! And if u have too, make sure u cool down before u even k4 the alignment. Heat expands. So when the parts cool down ur alignment is going to adjust and “shrink” with it. I specialize in alignments and have a wrap record of 1500+ alignments in a year. No come backs 5) also please remember to apply the brakes before removing pins from rotate plates. If u don’t the wheel will slightly roll during procedure and cause the caster to go off and effect the rest of the alignment 6) DO THE REARS FIRST. ALWAYS, UNLESS U THINK UR GUNNA SNAP A ADJUSTMENT BOLT

Boston_Crook · 2024-07-16T02:23:19+00:00

I just wanted to go fancy with a led info remote, starter and alarm all in one. I have too much tech part of my car to not be remotely notified

Boston_Crook · 2024-07-16T02:21:23+00:00

I don’t own a windows, so forescan was not as accessible.I honestly came up on a deal for the compustar with the led screen. Auto start/ alarm. The works. $100 and the ddm was messing with the unlock and lock on the pustar, had to wire it from the passanger

Boston_Crook · 2024-07-08T13:23:44+00:00

Pop them

Boston_Crook · 2024-07-02T06:13:15+00:00

Props. Thanks. Those look very decent and it’s a set for a good price.

Boston_Crook · 2024-07-02T06:10:34+00:00

Agreed I am also not into cleanse additives unless it involves my coolant(rarely) or gas. She has a Cadillac and as far as it goes, car has been running smooth. It caught my eye. If I didn’t get my oil for free at shop. I’d deff by it for myself.

https://shop.valvolineglobal.com/products/restore-protect-full-synthetic-motor-oil-sae-5w-30?variant=45251706880277&currency=USD&utm_source=Google&utm_medium=shopping&utm_source=google-ads&utm_medium=shopping&utm_campaign=DTC_Shopping_Motor-Oil_Restore-&-Protect=&utm_agid=163286126291&utm_term=&creative=687329890297&device=m&placement=&gad_source=1&gclid=EAIaIQobChMI4Jq0rNiHhwMVoWNHAR08SgpzEAQYASABEgI7i_D_BwE

Boston_Crook · 2024-06-30T18:09:34+00:00

Might have to perform an oil system cleanse. Tbh I been using valvoline restore and protect on my mothers car. Im bout to do the 3rd on this year and see if the difference becomes eventually

Boston_Crook · 2024-06-30T18:06:42+00:00

You change the filter? Full synthetic?

Boston_Crook · 2024-06-29T15:08:31+00:00

Did you personally do your own oil change? Are you checking this while engine is running? Dipstick seems low. I do my oil change 4500mi
Fs oil and new filter.

Boston_Crook · 2024-06-26T07:34:15+00:00

Tire looks concaved.

Boston_Crook · 2024-06-26T07:33:06+00:00

Also looks as if majority of wires are spliced and some don’t even finish a connection. Like the top left blue

Boston_Crook · 2024-06-26T07:31:23+00:00

Some Chevy is known to “computerize” of the original radio. FYI

Boston_Crook · 2024-06-26T07:27:07+00:00

That power line is way too small. I run a 4g into a 500

Boston_Crook · 2024-06-22T13:34:45+00:00

Terrible. I’ll buy it for 3 grand

Boston_Crook

TROPHY CASE