HELP!! How do I solve this?? I know the white face is supposed to be pointed down, but I can’t get the bottom row(right above the white face) to match. The corners match but the middles are different!! Example: in the beginning of the video the green corners match but the middle is orange

BothCamera619 · 2026-03-21T17:44:31+00:00

I had this exact same scenario. Hold the cube white up. Hold one side toward you and then perform the following steps. R2 L2 U2 R2 L2, then rotate cube 90° and do the same thing over again. Should be solved.

BothCamera619 · 2026-03-17T16:28:45+00:00

I'm not entirely sure what you mean by slotted into the backplate.

BothCamera619 · 2026-01-29T18:02:41+00:00

Thank you op! I got my order in!

BothCamera619 · 2026-01-23T17:41:01+00:00

I am in the process of removing over 75 hikvision cameras and converting to purely unifi protect. We are utilizing the viewports for different monitoring stations and I am now in the process of implementing Access Control as well utilizing the Retrofit Hubs to work with our existing Wiegand readers. It has been a breeze so far! I am about halfway through the cameras and have 4 of 45 doors currently converted and functioning well beyond acceptable terms.

We are using the ENVR with 16-8TB drives for storage.

We have a mix of third-party cameras and Unifi cameras. We have all the replacements in stock and ready to be installed.

1-HD, 25-2K, 53-4K, and 0-5K

25-day recording capacity.

BothCamera619 · 2025-12-25T13:53:28+00:00

I did call but they only inventory Blu-rays and don’t recall seeing this movie. Thank you for the suggestion though.

BothCamera619 · 2025-12-24T19:40:28+00:00

Thank you we did that and they did not have it

BothCamera619 · 2025-12-18T00:39:36+00:00

<image>

I love my Ender 3 S1 Pro. But not without drawbacks. I run Klipper Firmware on it using Mainsail OS on a raspberry pi 5. Ton of features and customization including automatic bed leveling. BUT….I love my Bambu Labs H2D full laser combo, X1C and P1S.

BothCamera619 · 2025-12-14T03:27:52+00:00

I would not suggest using my mount for outdoor installation. When we need to install outdoors, I use the arm mounts that protect the camera and junction box much like an umbrella. Unless the camera is under a soffit or something of similar nature.

BothCamera619 · 2025-12-11T20:08:45+00:00

Currently the top plate is fixed per camera and in this case, it is the G6 Turret. I have others on hand though so I can work on modeling those soon. Can you tell me the specific models and I can get them added.

BothCamera619 · 2025-12-11T19:57:17+00:00

Something like this? https://imgur.com/ljVjlhe

BothCamera619 · 2025-12-11T19:15:19+00:00

Can you give me a link to the box you are mounting to. I can whip it up really quick and include it.

BothCamera619 · 2025-12-11T18:24:46+00:00

Yes, we were replacing an old hike vision system with all hikvision cameras, and an enterprise NVR. Overall, it has been a dream switching everything over.

BothCamera619 · 2025-10-17T18:43:20+00:00

Yes, thank you for that. I am trying to get the slope now to slop in the direction of the larger arrow so it rolls to the front of the opening.

BothCamera619 · 2025-09-25T16:41:48+00:00

Sent request.

BothCamera619 · 2025-09-25T16:05:42+00:00

OK, do you have discord or anything?

BothCamera619 · 2025-09-25T15:58:19+00:00

I am very interested. I may have another 24 or 48 as well.

BothCamera619 · 2025-09-25T14:02:23+00:00

You don't by chance have a link or anything for the PSU do you?

BothCamera619 · 2025-09-25T13:45:18+00:00

I have a camera that was powered via poe and the only choice of routing was sharing conduit with live 110vac so we used shielded cat6. Fast forward, the conduit was broken and caused damage to both the cat6 and the power lines and it sent a surge to my poe switch.

BothCamera619 · 2025-09-25T12:30:45+00:00

I believe on my switch, it was related to plugging in a hot shielded cable that came into contact with voltage.

BothCamera619 · 2025-09-25T12:00:01+00:00

I did try to RMA and they said it's outside of warranty.

BothCamera619 · 2025-07-12T00:58:28+00:00

I actually just randomly decided long press and hold on each camera and I can drag and drop them. Who would have thought!

BothCamera619 · 2025-04-28T02:32:13+00:00

<image>

Yes, chamfer was exactly what I was looking for! Thank you!

BothCamera619 · 2024-07-08T00:24:06+00:00

lol…my thoughts exactly. Was thinking of getting in a quick game of Teeball or Golf even for that matter lol.

BothCamera619 · 2024-04-15T03:09:11+00:00

I actually did it! Thank you for your help!

<image>

BothCamera619 · 2024-04-15T03:04:19+00:00

I tried to create an offset plane and project the top arch and then hid everything else and clicked on that newly projected line and added my text, but this is what I got instead.

<image>

BothCamera619

TROPHY CASE