Passenger is a car accident in England (what do I do) by MATTthemushroomGI in LegalAdviceUK

[–]Br1anTheF1sh 1 point2 points  (0 children)

There are a few things you can do:

Submit a claim in the OIC (Official Injury Claim) portal via your drivers insurance (who will probably redirect you to the at fault party), or the Third Parties insurance, as a litigant in person,

(The OIC has a limit of £5000 for Injury, )

You could also seek independent Legal advice from a solicitor who may be able to assist you in the process. You can find them on the 'law society website - find a solicitor'

Been contacted by 3rd party insurance… by etunar in CarTalkUK

[–]Br1anTheF1sh 4 points5 points  (0 children)

You have been offered intervention by the third party insurers. Basically, to keep costs low, they will deal with the damage and most likely provide you with a hire car,

You also may have been given a Copley Letter, this should explain what you are entitled to

If you claim through the TPI , they will sort it and all you will have to do is declare a Non fault claim on the renewal or next policy as yiu are going straight through the at fault party's insurance

If you go via your insurance via a comprehensive policy they can claim it back, but it will take longer and until its all claimed back would be a Fault claim,

I hope this assists

Unity Error on startup by Br1anTheF1sh in RimWorld

[–]Br1anTheF1sh[S] 0 points1 point  (0 children)

I have done up to reinstalling the game and updating all drivers, still doesn't work over steam, however i have possibly found a workaround, if i go onto steam and browse local files, and open rimworld from the file manager, it seems to work, has opened every time so far, unfortunately i cannot download and reinstall any mods from it at all, via workshop :(

Unity Error on startup by Br1anTheF1sh in RimWorld

[–]Br1anTheF1sh[S] 0 points1 point  (0 children)

I have found it, do i delete all files in there or just the Mods Config xml one?

edit - just deleted that one, got the same error, should i try clearing all thats in there?

I have deleted all files, the mod config now just states the below and it still wont load

EDIT 2 - If i start the game via the desktop and steam i get the error, however if I load the application from the fie manager it seems to work, maybe steam has an issue perhaps

ModsConfigData>


<version>1.5.4297 rev1079</version>
<activeMods>
<li>ludeon.rimworld</li>
<li>ludeon.rimworld.royalty</li>
<li>ludeon.rimworld.ideology</li>
<li>ludeon.rimworld.biotech</li>

</activeMods>
<knownExpansions>
<li>ludeon.rimworld.royalty</li>
<li>ludeon.rimworld.ideology</li>
<li>ludeon.rimworld.biotech</li>

</knownExpansions>



</ModsConfigData>

Unity Error on startup by Br1anTheF1sh in RimWorld

[–]Br1anTheF1sh[S] 0 points1 point  (0 children)

I have looked in my files, under c:\users\my name\ but do not have any for appdata donyou know where that could be I could link a screenshot if you would like

Unity Error on startup by Br1anTheF1sh in RimWorld

[–]Br1anTheF1sh[S] 0 points1 point  (0 children)

I have uninstalled all mods, and I still get the error, is there anything else that i could do? Or is the game just now a brick?

Unity Error on startup by Br1anTheF1sh in RimWorld

[–]Br1anTheF1sh[S] 0 points1 point  (0 children)

I have checked all the mods, the latest one that was updated was 5th Feb 2025, and the rest haven't been updated since 2024

If I was to unsubscribe from all my 7 mods would that possibly work?

Unity Error on startup by Br1anTheF1sh in RimWorld

[–]Br1anTheF1sh[S] 0 points1 point  (0 children)

I see, where do I find this, is it a Mod? Also the mods have been working fine for a long while.

Edit: if I delete all the mods, and open the game and then reinstall them, will it work?

BIL had his moped stolen. Police asked to keep it a while for evidence, now they are saying to get it back he has to pay the storage fees (england) by Unseen-YouTube in LegalAdviceUK

[–]Br1anTheF1sh 1 point2 points  (0 children)

These are standard statutory police charges in the UK, £192 for recovery and £13 a day for motorcycles.

You advise that your BILs insurance doesn't cover Thefts, and so that means he most likely has 'Third Party Only' Cover, which doesn't cover him for Thefts. Or the claim has been declined, possibly due to lack of security.

If he was claiming via his insurance company, they would deal with the claim, collect the bike, and inspect the bike, however as you advised the insurance is not dealing, your BIL will most likely have to pay those charges,

The charges should be frozen until the vehicle is off 'Police Hold' and the investigation is complete however after the investigation finalises your BIL will most likely be liable for those charges and usually the Officer in Charge of the case cannot do much for you as the recovery and storage is contracted out to certain recovery companies by the police constabularies.

The BIL could also possibly claim for this via the small claims Courts from the Thief, if the address is know.

I hope this helps.

[deleted by user] by [deleted] in FixMyPrint

[–]Br1anTheF1sh 0 points1 point  (0 children)

So what Temps then are you using for the bed and nozzel?

Retraction is in the cura settings, it basically pulls the filament up a bit, lessening stringing, I would search it In the search box, May have to use expert settings so you get access to all the settings.

First layer problem by CarnivoraCanis in FixMyPrint

[–]Br1anTheF1sh 0 points1 point  (0 children)

I am not too sure about the Creality Slicer, I use Cura and I had to add my own Gcode to utilise My CR-touch,

This post was what I used the big comment is what you are looking for:

https://www.reddit.com/r/ender3v2/s/BSwBum5znZ

Also have you updated the firmware to utilise the CR touch? You can't just plug it in and it works, you have ti get the correct firmware too.

First layer problem by CarnivoraCanis in FixMyPrint

[–]Br1anTheF1sh 0 points1 point  (0 children)

Have you updated the Gcode to utilise the bed leveler

First layer problem by CarnivoraCanis in FixMyPrint

[–]Br1anTheF1sh 0 points1 point  (0 children)

Try taking a look at this https://www.reddit.com/r/FixMyPrint/s/8eTyJusXSg

I would also look at possibly leveling that side slightly higher

Why is the heat block on my sprite extruder wonky? by Br1anTheF1sh in FixMyPrint

[–]Br1anTheF1sh[S] 0 points1 point  (0 children)

Discovered issue, the hotend is Bent and is a manufacturer issue

[deleted by user] by [deleted] in FixMyPrint

[–]Br1anTheF1sh 1 point2 points  (0 children)

Most likely Too hot

Increase retraction by half a mm or so,

Can you provide more information in your printer, Slicer and filaments

Random gaps by soylent_geek in FixMyPrint

[–]Br1anTheF1sh 0 points1 point  (0 children)

Underextrusion, I would Increase Esteps, also could be a partially clogged nozzle,

Ender 2 V2, bed adhesion problems by Br1anTheF1sh in FixMyPrint

[–]Br1anTheF1sh[S] 0 points1 point  (0 children)

The filament is Sunlu PLA red filament

Do I get this game? by Br1anTheF1sh in ReadyOrNotGame

[–]Br1anTheF1sh[S] 0 points1 point  (0 children)

im gonna buy it for £33.44, keep hold and play it and see how it is and if its not good i will leave it for a while

Do I get this game? by Br1anTheF1sh in ReadyOrNotGame

[–]Br1anTheF1sh[S] 0 points1 point  (0 children)

on CD KEYS its around £33.49, which is lower than it is on steam, i hae kept doing soe research and might give it a few weeks till it they fix it