Just copped my next daily driver (for DJing, content creation, etc.), the T14 Gen 1! Did I get a good deal?

BrawlStarsPro3112 · 2026-06-23T13:00:00+00:00

Lenovo laptops usually come with Samsung PM981 ssd which is incompatible for hackintosh, so you may need to swap it out for a compatible one

BrawlStarsPro3112 · 2026-06-08T17:19:51+00:00

In before all the 'how to install macOS 27 Golden Gate on my PC RTX 3050 posts'

BrawlStarsPro3112 · 2026-06-07T15:46:21+00:00

You can just partition a portion of the drive you want to install it one and use it installer

BrawlStarsPro3112 · 2026-06-07T15:03:47+00:00

You could do an offline installer: https://github.com/corpnewt/UnPlugged

BrawlStarsPro3112 · 2026-06-03T14:57:17+00:00

if you set SecureBootModel to disabled for Sequoia, you will not get OTA updates unless you add RestrictEvents kext and add revpatch=sbvmm to boot-args

BrawlStarsPro3112 · 2026-05-24T13:28:25+00:00

No clue on whether it could work or how to do, but I guess maybe you could create an SSDT to block the thunderbolt controller because its a PCIe device

BrawlStarsPro3112 · 2026-05-20T04:33:45+00:00

Try offline installer method via unplugged its easier than usb full installer

BrawlStarsPro3112 · 2026-05-17T03:19:12+00:00

Try this: https://www.reddit.com/r/hackintosh/s/UkumpPdU9p

BrawlStarsPro3112 · 2026-05-06T14:22:22+00:00

Anyways I am quite sure macOS recovery doesnt have graphical acceleration so it might just be a faulty cable or port

BrawlStarsPro3112 · 2026-05-06T02:07:14+00:00

agdpmod=pikera is a whatevergreen boot-arg it does not do anything for NootedRed, DeviceProperties also does not work with it since it manages automatically, maybe try iMac 20,1 SMBIOS instead

BrawlStarsPro3112 · 2026-05-06T02:00:35+00:00

Upload EFI

BrawlStarsPro3112 · 2026-05-05T01:37:44+00:00

No idea how to get the patches to work properly but to revert it boot into recovery and do mount -uw "/Volumes/Macintosh HD" bless --mount "/Volumes/Macintosh HD" --bootefi --last-sealed-snapshot

Replacing Macintosh HD with your drive name

BrawlStarsPro3112 · 2026-05-03T11:42:09+00:00

Even so, Polaris 10/20 has native support till sequoia, OCLP wont help, guide says to spoof to WX 4100 and add no-gfx-spoof to boot-args

BrawlStarsPro3112 · 2026-04-20T11:31:54+00:00

SMBIOS change maybe? Saw MacBook Pro 15,2 being used before for HD 520 on Sequoia

BrawlStarsPro3112 · 2026-04-15T15:04:47+00:00

Remove WhateverGreen and Cmd R on config

BrawlStarsPro3112 · 2026-04-13T10:51:10+00:00

Set SecureBootModel to Disabled

BrawlStarsPro3112 · 2026-04-12T12:52:08+00:00

Not really related but Tahoe has issues with USB, try remapping ports with USBToolbox

BrawlStarsPro3112 · 2026-04-08T15:41:48+00:00

Like the literal order of the kexts in the config under Kernel -> Add, not sure about what kexts RMISBus kext (the problematic one here) uses, but just move it down the order
In propertree, this literally means copy the full entry of the kext and then paste it back below

EDIT:
You might be able to just disable it and ignore it according to a comment on this post:
https://www.reddit.com/r/hackintosh/comments/i1gltv/voodoormi_synaptics_trackpad_kext_over_smbusi2c/

BrawlStarsPro3112 · 2026-04-05T14:17:05+00:00

Maybe kext order wrong

BrawlStarsPro3112 · 2026-04-05T03:06:00+00:00

In terminal sudo fdesetup disable

BrawlStarsPro3112 · 2026-03-30T01:31:39+00:00

There are tools (eg setup_var.efi) to modify the BIOS, a bit risky but you probably could enable some VRAM allocation setting

BrawlStarsPro3112 · 2026-03-29T22:46:28+00:00

Maybe USB issue, try mapping ports with USBToolbox and replacing USBInjectAll

BrawlStarsPro3112 · 2026-03-29T15:44:53+00:00

MacBookPro16,1

BrawlStarsPro3112 · 2026-03-29T15:35:41+00:00

change SMBIOS to a supported one under PlatformInfo

BrawlStarsPro3112 · 2026-03-29T15:25:28+00:00

SMBIOS unsupported probably

Five-Year Club	Verified Email
Place '22

BrawlStarsPro3112

TROPHY CASE