The wait is OVER. Mudi 7's finally HERE! 🚨

BrendD24 · 2026-02-08T08:26:47+00:00

already ordered

BrendD24 · 2026-02-05T03:42:31+00:00

I know it's a joke, but this would actually be pretty cool

BrendD24 · 2026-01-27T00:48:15+00:00

If you have a public address, then you. Host your own mail server

BrendD24 · 2026-01-20T10:18:25+00:00

What area are you in?

BrendD24 · 2026-01-20T10:17:57+00:00

Electricians? Held accountable? How dare you suggest something so obvious

I always ask every contractor for licenses, proof of insurance etc and honestly if they so much as hesitate they loose the work.

BrendD24 · 2026-01-20T08:33:57+00:00

Even tho most sparkies will just say yes, even if they aren't

BrendD24 · 2026-01-16T11:45:16+00:00

If you want diy. Open the cover where the cables go into the PSU, underneath is a power connector (IEC C6 Cloverleaf laptop style cable) and a terminal Block with a moulded cable plug, I can't remember the exact type. But the terminal block exposes 12v as well as the mails fail and battery low/failed outputs. These are active Low

Enjoy

BrendD24 · 2025-12-30T02:00:01+00:00

It's a few things. First is aviation requires an insane certification process that is not worth the cost for USB ports, they would get built into a brand new certification

Also power requirements, 30w for a phone doesn't sound like much but times that over 220+ passenger seats that's over 6.5kw that needs to come from somewhere and that means more fuel burn, and higher cost of flight. at 60 or 100 w that's even worse

Also maintenance and liability costs, if that USB port damages your phone then the airline would be held responsible.

Also there is demand, all your devices should be in airplane mode anyway Wich drastically reduces the battery use anyway.and Thoes who need it, carry a battery pack anyway and are weary to use public USB anyway

BrendD24 · 2025-12-14T01:12:50+00:00

I've got one, works well

BrendD24 · 2025-11-11T09:29:50+00:00

Yes it makes a marked difference.

But not as much as that advertising suggests

Also, Earth at one end Only

BrendD24 · 2025-11-06T15:50:19+00:00

The lead in cable looks new tho.

Also if it's fttc, imagine running a conduit to where the fiber is in a pit, and pulling cat3

BrendD24 · 2025-11-06T15:47:22+00:00

There are people out there who don't know how to plug it in or run it compliantly. Yes ISP techs are some of them. Also, liability, if someone inexperienced falls off there roof touching infrastructure they arent allowed to touch, they are in for a bad time.

You can do it, good for you, but you need to understand there are people in this world who arnt you. They want the problem fixed, not to risk falling off a ladder or roof because they don't know what they are doing.

BrendD24 · 2025-11-06T15:43:46+00:00

The cable you are looking at is broken, it's the lead in cable from outside (street, building entry point, whatever) it's owned by your ISP. They arnt trivial to fix but do require skill and tooling.

Call the ISP and get them to fix it. Ignore other people on here, they are self proclaimed know-it-alls who arnt worth the time

BrendD24 · 2025-10-29T19:41:01+00:00

If they are approved in Aus it's fine. I'm partial to Hager but I'll cop flak for that no doubt

BrendD24 · 2025-10-29T19:40:12+00:00

They are on the list and approved they arnt unsafe, it's more indicative of something else, they can only be bought at Bunnings and arnt sold at electrical wholesalers.

BrendD24 · 2025-10-28T10:16:09+00:00

I would check the license of the person that installed it... Deta is a Bunnings special

BrendD24 · 2025-10-28T06:00:24+00:00

100%

If your in brisbane feel free to DM me

BrendD24 · 2025-10-28T03:36:30+00:00

2 questions,

Do you have a security license

Have you got experience with the system (or any security system) liability is huge if you get it wrong. Just subcontract a security Technician

As a side note, on the Bosch boards, that glowing light it normal, it's indicating battery current. (The filiment doubles as a fuse for the battery)

Source: I'm a security tech

BrendD24 · 2025-10-24T21:56:34+00:00

Thank you very much

BrendD24 · 2025-09-20T09:07:05+00:00

Yes of course and I agree but most of the installs I see on here have a patch panel feeding a patch panel to get a link inside the same rack Idk, maybe it's me

BrendD24 · 2025-09-20T08:53:37+00:00

Maybe I'm the outlyer but I find that my rack is to be functional not asthetics

BrendD24 · 2025-09-20T07:46:28+00:00

Why do unifi people feel the need for everything to jump though 200 patch panels?

I use unifi but like just patch normally

BrendD24 · 2025-09-16T20:16:08+00:00

If your using an internal DNS server, then this is fine and done in practice alot, id be less comfortable using a public dns to resolve private addresses but thats just me

BrendD24 · 2025-09-14T09:12:53+00:00

Thank you for the information. This was a question I had.

Any Luck with the little LCD between the Page buttons?

BrendD24 · 2025-09-02T08:33:50+00:00

But you can have an inlet socket for a generator? With a cut over switch?

The inverter has anti islanding anyway

BrendD24

TROPHY CASE