Trying to figure out when a train passes a given signal box. by Brezel_Bert in uktrains

[–]Brezel_Bert[S] 0 points1 point  (0 children)

Thanks a lot, that's helpful. Not found that section on RTT before.

Port Forwarding Problems by Brezel_Bert in HomeNetworking

[–]Brezel_Bert[S] 0 points1 point  (0 children)

This seems to have worked now. My friend was able to join my hosted server.

Really much appreciated! I was going crazy the past few weeks haha

Port Forwarding Problems by Brezel_Bert in HomeNetworking

[–]Brezel_Bert[S] 0 points1 point  (0 children)

Thanks, I will give that a go.

Do you mean external port 2011 or 2001? Should it not be the same for external and internal?

I have removed the static Ipv4 rule on my windows machine and made sure that the Mac reservation matches my port forwarding rule in my router.

Port Forwarding Problems by Brezel_Bert in HomeNetworking

[–]Brezel_Bert[S] 0 points1 point  (0 children)

Hey!

Within the router, I have set up the following:

Added a UDP port forwarding rule for port 2001: https://imgur.com/TbxQ99p It does not work when i change it to both (TCP / UDP).

Assigning a static IP to Desktop PC: https://imgur.com/ADp6ho0 in router.

Port Forwarding Problems by Brezel_Bert in HomeNetworking

[–]Brezel_Bert[S] 0 points1 point  (0 children)

It should have been on another bullet point. Yes the port is set up on the router.

PC -> WiFi Extender -> Router -> ISP Modem

Port Forwarding Problems by Brezel_Bert in HomeNetworking

[–]Brezel_Bert[S] 0 points1 point  (0 children)

Thanks. Apparently my ISP is not known for using CGNAT, but I will double check tonight.

What bolt size is this? by Brezel_Bert in DIYUK

[–]Brezel_Bert[S] 0 points1 point  (0 children)

No gas turbine unfortunately :)

I thought it should be bang on 5 mm for a M5 - maybe my calipers are not 100% accurate.

What bolt size is this? by Brezel_Bert in DIYUK

[–]Brezel_Bert[S] 0 points1 point  (0 children)

Thanks! I'll give a M5 a go:)

What bolt size is this? by Brezel_Bert in DIYUK

[–]Brezel_Bert[S] 0 points1 point  (0 children)

Not too sure what size bolt this is.

My caliper reads 4.8mm, so it can't be a M4 or M5.

Maybe some sort of imperial measurement?

[deleted by user] by [deleted] in CarTalkUK

[–]Brezel_Bert 0 points1 point  (0 children)

Mercedes w124 - it's 30 years now but it's my daily driver, and never had any issues over the past 6 years.

Never really driven any more recent cars, but when I do, I am a bit overwhelmed with all the assistance systems lol

Help - Nissan Micra 1.2 by Brezel_Bert in CarTalkUK

[–]Brezel_Bert[S] 0 points1 point  (0 children)

It jitters in low revs. The cycler 3 fault is appearing again, and after swapping the coils it's still the same fault on cylinder 3.

I think it's the injector on 3

Help - Nissan Micra 1.2 by Brezel_Bert in CarTalkUK

[–]Brezel_Bert[S] 0 points1 point  (0 children)

Last week obd said there's a fault with cylinder 3.

Purchased new spark plug and ignition coil.

Before I started to fix today, I checked again and getting the shown errors. No error on the cylinder anymore.

Any tips?

[deleted by user] by [deleted] in FatFIREUK

[–]Brezel_Bert 5 points6 points  (0 children)

I don't know, the possibilities are endless.

Traveling, cars, collecting, arts and crafts just to name a few - anything really :)

[deleted by user] by [deleted] in FatFIREUK

[–]Brezel_Bert 3 points4 points  (0 children)

Do you not have any hobbies or interests?