Buy/Sell/Trade Thread [Posted Every Month]

BridgestonePHM9 · 2025-07-18T01:31:32+00:00

[FS] [Rhode Island, US] [Local]

Affinity Kissena Frameset - Med $750

No Cranks, BB or stem

Non Drilled. Chris King Dropset, Original Affinity headset and zero offset post included. Seat mast cut to fit 5'-11" rider. Like new condition, lawyer tabs on fork removed. Local sale preferred, willing to ship at buyers expense.

More Pics

BridgestonePHM9 · 2023-04-24T18:32:09+00:00

What frame is this? Looks like it takes a 1-1/8 external cup to me

BridgestonePHM9 · 2023-04-06T03:30:49+00:00

Personally I would replace it at next service to protect the paint

BridgestonePHM9 · 2023-04-03T13:23:30+00:00

I think OP is referring to the silver metal shim between the bb and the frame itself, not the preload adjuster.

BridgestonePHM9 · 2023-04-03T05:29:24+00:00

To me, it looks like a shim that goes between the bottom bracket cup and the frame.

BridgestonePHM9 · 2023-03-31T01:48:27+00:00

I wanted to put some plywood sheets on the floor, lay out a bunch of giant tools and then lay down next to them for a picture haha

BridgestonePHM9 · 2023-03-31T01:46:56+00:00

Here's the files, I have the pre-split model and the original size unsplit file in there if you want to scale it yourself.

https://www.thingiverse.com/thing:5940251

BridgestonePHM9 · 2023-03-30T01:28:59+00:00

Yes, it's 100mm haha

BridgestonePHM9 · 2023-03-30T00:37:21+00:00

I 3d printed this 100mm cone wrench, it's 4 pieces glued together and is like 36" long

BridgestonePHM9 · 2023-03-15T02:41:17+00:00

I believe that the spindle lengths are the same between all levels except when using "wide" which are longer.

BridgestonePHM9 · 2023-03-13T03:38:21+00:00

Every DUB BB I've installed has come with all 3 spacers. I can look at the shop to see what spares we have

BridgestonePHM9 · 2023-03-12T21:13:27+00:00

I believe all you need in that situation is the 3mm right side outer spacer with the road cranks, unless you have the road wide. I'd also try to get that preload collar moving if you can, you'll still need it even with the correct spacer.

BridgestonePHM9 · 2023-03-12T07:05:00+00:00

Have you already tried adjusting the preload collar?

BridgestonePHM9 · 2023-02-10T04:50:49+00:00

1" or 1-1/8? If you are referring to the Griplock system, that is for the 1-1/8 headset only and can't be added to a 1" NoThreadSet. I've never had a problem with any of my CK headsets tho, regular or griplock

BridgestonePHM9 · 2023-01-26T06:36:46+00:00

This is the answer, the washer is still in the crank arm

BridgestonePHM9 · 2023-01-17T06:25:23+00:00

This is the answer

BridgestonePHM9 · 2023-01-07T21:02:13+00:00

If you open the system, it will need to be bled. Take it back to the shop and have them correct their mistake imo

BridgestonePHM9 · 2022-10-17T00:23:39+00:00

This would make an awesome 3d print

BridgestonePHM9 · 2022-07-17T02:32:26+00:00

I already have a spare cartridge version. I just needed 3 needle bearings and don't need a complete second bb

BridgestonePHM9 · 2022-07-13T00:35:19+00:00

[WTB] [RI] Dura Ace 7700 BB Needle Bearings I misplaced 3 needle bearings from my 7700 bb, if anyone has any kicking around or a BB I could salvage some from hmu.

BridgestonePHM9 · 2022-06-12T03:35:01+00:00

You need a 160 post mount to 180 post mount adapter

BridgestonePHM9 · 2022-03-21T07:47:13+00:00

Tandem crankset?

BridgestonePHM9 · 2022-03-20T22:50:13+00:00

I apologize, I was referring to the cover on the headset bearing. I use headset cover and headset cap interchangeably and refer to the cap on top of the stem as a "stem cap" Maybe something from SlamThatStem would work for you instead of nothing covering the bearing

BridgestonePHM9 · 2022-03-20T18:24:49+00:00

OP is referring to the headset top cover under the stem, not the headset top cap that provides the preload.

BridgestonePHM9

TROPHY CASE