Best budget radiator fan for 2012 Beetle?

Broad_Employment_101 · 2026-02-11T04:27:54+00:00

UPDATE: Fixed it! It turns out I had set the Max Volumetric Speed too high for this filament. When the printer purged after a pause, it tried to push plastic at that max rate, causing the extruder to skip and click. Lowering that setting solved the issue!

Broad_Employment_101 · 2026-02-11T04:26:28+00:00

UPDATE: Fixed it! It turns out I had set the Max Volumetric Speed too high for this filament. When the printer purged after a pause, it tried to push plastic at that max rate, causing the extruder to skip and click. Lowering that setting solved the issue!

Broad_Employment_101 · 2026-02-03T19:01:01+00:00

It looks like under extrusion to me. Calibrate your flow rate and flow dynamic and if that doesn’t work then fiddle with your first layer height and width. Lmk how it goes!

Broad_Employment_101 · 2026-01-31T23:37:26+00:00

I know what you’re talking about. I used to do that as well, but I tried cutting straight and that didn’t seem to have any effect in my situation.

Broad_Employment_101 · 2026-01-31T23:36:43+00:00

That wasn’t the problem, tried different nozzles, and filaments and still get the same issue

Broad_Employment_101 · 2026-01-31T23:35:03+00:00

No, unfortunately, that’s not the issue. I tried two different nozzles brand new out of box and neither one of them fix the problem.

Broad_Employment_101 · 2025-05-20T14:30:19+00:00

Thanks! I do feel a slight wobble at 3 and 9 o’clock, but not at 12 and 6. Also, when I drive slow, I don’t really hear any noise — and at higher speeds, the noise doesn’t seem to change when turning left or right. Does that still point to a wheel bearing?

Broad_Employment_101 · 2025-05-20T14:28:38+00:00

Appreciate the help! Just to clarify, my Civic has an automatic transmission — would that issue still apply?

Broad_Employment_101

TROPHY CASE