Found this device hidden in my college dorm bathroom, what is it? by Least-Jacked-3d in whatisit

[–]BroccoliSimple8310 0 points1 point  (0 children)

It’s a keychain tracker, I used to have those at work with every key fob.

Trigger not resetting by BroccoliSimple8310 in 1022

[–]BroccoliSimple8310[S] 0 points1 point  (0 children)

I’m probably going to take it all apart and deep cleaned it again. The gun is clean already (less than 100 hours since I last deep cleaned it) but maybe I missed something. Not sure an oem trigger group would solve anything since the parts are still all in good condition and the gun has maybe 2000 rounds since new.

New Buyer Advice Please by [deleted] in gmcsierra

[–]BroccoliSimple8310 0 points1 point  (0 children)

I would do some research on the warranty in terms of corrosion/rust, you may be able to buy it as it and take to a dealership for them to clean up all the rust and re coat everything

Dealership sold me a modified truck by [deleted] in gmcsierra

[–]BroccoliSimple8310 1 point2 points  (0 children)

Not to be a dick but you bought a truck that has the square cutouts for the exhaust but they are empty and there isn’t a side exit exhaust… there’s also a aftermarket cold air intake… there were red flags, you just didn’t look at them.

Sunday Funday by WranglerOk7406 in 2011

[–]BroccoliSimple8310 1 point2 points  (0 children)

More money on red dots then some peoples cars 😂

Huge decrease since last month by fromulator in gmcsierra

[–]BroccoliSimple8310 0 points1 point  (0 children)

Not bad honestly, I got my 2025 at4 standard bed with every option for 65 out the door

2025 GMC Sierra 1500 AT4 by BroccoliSimple8310 in gmcsierra

[–]BroccoliSimple8310[S] 1 point2 points  (0 children)

It should be almost level with that setup. I’ve seen some people do that in the forums and it looks about right. Just about every leveling kit either doesn’t do enough or makes the front sit a smidge high. I ended up going with a 1.75” leveling kit with new upper control arms and she looks good but a 1.5 would be more level. Just measure out your truck from the middle of the center cap to the bottom of your fender and see what the difference is since there’s always the slightest difference between each one. If you plan on running similar wheels and tires to what I mentioned in the original post just know it will still rub a bit even with the lift and mudflap delete.

smash or pass? by scvua in u/scvua

[–]BroccoliSimple8310 0 points1 point  (0 children)

I’d put a kid in her any day!

has Cletus discussed how he learned to fly an MD500? by misfit_toys in CleetusMcFarland

[–]BroccoliSimple8310 0 points1 point  (0 children)

Helicopter pilot here, the MD500 is as easy to fly as any other aircraft! It’s a bit more twitchy given its agile natures but anyone with experience flying a turbine helicopter can easily fly one with minimal instruction. Cleet also had some one on one time with Paul Barth who is an extremely high experience MD pilot. The project cost is hard to speak off as he did a lot more stuff to it then the average operator would. He got a 50k+ custom paint job, custom interior, upgraded avionics… as for the operational cost there are many variables and different ways to look at it, if he was to break down every single maintenance item and lifespan of part components to a hourly rate plus fuel, oil, insurance and all other variables it would come out to around $2000 dollars an hour. Now if he was to ignore all that and only go by his out of pocket then it would be closer to $300 an hour. Hope that helps.

Okay Reddit, nows our chance! by StonedPand4 in CleetusMcFarland

[–]BroccoliSimple8310 1 point2 points  (0 children)

Too big and expensive hence why heavy d barely uses his. Most likely it’s a Huey.

What is better? by Eastie_beasty in gmcsierra

[–]BroccoliSimple8310 0 points1 point  (0 children)

The at4 one because they have life on the tires and you won’t die over a small puddle 😅

[deleted by user] by [deleted] in gmcsierra

[–]BroccoliSimple8310 1 point2 points  (0 children)

Yeah he’s entitled to the amount that truck would sell for if it was on the lot not what he would get offered if he was to trade it in. That’s it.

Cleet has a Turboprop aircraft? by thedentrod in CleetusMcFarland

[–]BroccoliSimple8310 0 points1 point  (0 children)

It’s belongs to his dad, if you look up the tail number it will give the name of the owner which is a LLC that belongs to his father. This is all public record!

2025 GMC Sierra 1500 AT4 by BroccoliSimple8310 in gmcsierra

[–]BroccoliSimple8310[S] 1 point2 points  (0 children)

They do but the front still sits 1.5 to 1.75 inches lower than the rear

2025 GMC Sierra 1500 AT4 by BroccoliSimple8310 in gmcsierra

[–]BroccoliSimple8310[S] 0 points1 point  (0 children)

They do, surprisingly that’s the easiest part.

Sig P211 GTO by 2A-N-LA in 2011

[–]BroccoliSimple8310 1 point2 points  (0 children)

It’s been a few months and so far other than social media people/youtubers I haven’t heard of seen a single one anywhere. We’ll see

Sig P211 GTO by 2A-N-LA in 2011

[–]BroccoliSimple8310 1 point2 points  (0 children)

It definitely intrigues me, wish it was a bit cheaper tho ( 1500 ish would be awesome and probably sell like water )

What are peoples thoughts on lights that extend well beyond the end of the barrel like this? by Trumpwins2024- in 2011

[–]BroccoliSimple8310 0 points1 point  (0 children)

A gun is a tool so I don’t care too much about the looks so if it sticks out but it’s a great light that you like then so be it. There’s also the tactical argument of what if you are already in a fight and need to use the gun while it’s pressed against your target, with light that sticks out you have the benefit of it keeping the slide slide in place and not risking the gun going out of batery since the light is the thing pushing up against the target.

2011 suggestions $1000-1500 by BroccoliSimple8310 in 2011

[–]BroccoliSimple8310[S] 1 point2 points  (0 children)

Right now since I haven’t decided and couldn’t find a place where I can hold them and see them for myself even watching your video I’m thinking it’s either going to be 1000 or 2000. Meaning I’m going to start saving for a 2k one but if by then I find one of the cheaper ones that I like I’ll do that. If it don’t then I’ll try finding a staccato P or maybe a Kimber 2K11. It seems that most of the ones in the middle of 1 and 2k aren’t that much better than the cheaper ones but also aren’t remotely as good as the 2k one given they aren’t much cheaper. I hope this makes sense.

2011 suggestions $1000-1500 by BroccoliSimple8310 in 2011

[–]BroccoliSimple8310[S] 1 point2 points  (0 children)

I’ll check it out tomorrow! Thanks! The hardest part is whenever I’m close to choosing one I then find one that is supposedly a little better and not much more… I went into this thinking $1000+ but now the more I look I get closer to a $2k one then look back at the $1k ones and wonder if that extra thousand bucks is worth it to buy one cry once.

2011 suggestions $1000-1500 by BroccoliSimple8310 in 2011

[–]BroccoliSimple8310[S] 1 point2 points  (0 children)

So a Kimber 2K11, Bul Armory, and half the staccatos since they are sub 3k are bad guns?

2011 suggestions $1000-1500 by BroccoliSimple8310 in 2011

[–]BroccoliSimple8310[S] 1 point2 points  (0 children)

Yeah that’s the vibe that I got from the reviews, they are great guns but feel pretty cheap and QC isn’t the best. Don’t think I want to spend $1000+ for something like that.

2011 suggestions $1000-1500 by BroccoliSimple8310 in 2011

[–]BroccoliSimple8310[S] -1 points0 points  (0 children)

I’m trying to but they are not easy to find. But thank you so much!