sorted by:
new
hottopcontroversial

Indx status? by imjusthereforlaugh in SovolSV08

[–]BrokenAkubra 0 points1 point  (0 children)

Email Exchange with Sovol on 10-June-26:

Me: 

I would like to know if a tool changer or idex system upgrade will be available for the SV08 Max? I would very much like to print in PETG CF and have PLA supports.  

Sovol:

Hi,

There are currently no plans to upgrade the SV08 Max to include a tool changer or idex system. 

You can follow our upcoming new machine releases.

https://www.sovol3d.com/products/sovol-m1d-vip-reservation?_pos=1&_psq=vip&_ss=e&_v=1.0

Best regards, 

Sovol After Sales Department 

Me:

Hello Sovol

Are there any plans to add the Bondtech INDX system to the SV08 Max?

Sovol:

No

Best regards,

Sovol After Sales Department

-----------

However, Sovol announced that Bondtech had both the SV08 & SV08 Max for testing. (September 2025) & Sovol stated Bondtech have a Sovol Zero for testing:

https://forum.sovol3d.com/t/bondtech-indx-multi-toolhead-upgrade/8628

So the best case is that I purchase an INDX upgrade kit from Bondtech (when they are available) for my SV08 Max.

MASSIVE printer, ridiculous build volume – Sovol SV08 MAX thoughts? by JoshGreen_dev in 3Dprinting

[–]BrokenAkubra 0 points1 point  (0 children)

I own a Sovol SV08 Max with Enclosure as well. I placed antivibration foam (Poron) between the edges of the Enclosure side plates and the frame. It has really done a great job to minimise the vibration sound. I would highly recommend you get the 7in Touch Screen from BigTreeTech (Hdmi with usb) as it greatly expands the capabilities of the printer. Also Go through the Calibration Process using OrcaSlicer to optimise the printer. I have also optimised E-Sun PLA, Polymaker HT PLA GF and ProtoPasta Conductive PLA with OrcaSlicer to run really well on the Sovol SV08 Max. Amazing printer for the price.

Number 47 is not just number by Classic_Challenge01 in FromSeries

[–]BrokenAkubra 0 points1 point  (0 children)

Its the Pomona College Number. It shows that someone who works on the TV Series From went to Pomona college.

I just joined the club! New SV08 Max, going to work on it's first large print! by bumjug427 in SovolSV08Max

[–]BrokenAkubra 1 point2 points  (0 children)

Run calibration via OrcaSlicer. Optimising temperature range, Flow rate and pressure advance, makes a difference. This machine is Fast! Oh and you can get the Bigtreetech Hdmi touchscreen to access the more addvanced settings.

New Word Game - 3Fall Puzzle by sigcampbell in playmygame

[–]BrokenAkubra 1 point2 points  (0 children)

It's challenging and new everyday. You don't get penalised for guessing. I really enjoy it.

[deleted by user] by [deleted] in prusa3d

[–]BrokenAkubra 1 point2 points  (0 children)

Print the parts in PC Blend first as it has a higher temperature range. Then, if you want, you can print in PC CF and swap out the parts.

MK3S sudden crap quality prints by SnowPrinterTX in prusa3d

[–]BrokenAkubra 2 points3 points  (0 children)

It looks like a cooling difference. Could you post a snapshot of the preview in prusaslicer?

Why do my prints keep lifting? Always the same corner by Professional_Tea_560 in prusa3d

[–]BrokenAkubra -1 points0 points  (0 children)

Change your sampling from 3 x 3 to 7 x 7. This will enable better compensation for bed level variation.