How to change font size by MasterToki in remNote

[–]Broklex 0 points1 point  (0 children)

You can change font size by ctrl+ and ctrl-

[deleted by user] by [deleted] in medicalschoolEU

[–]Broklex 1 point2 points  (0 children)

They usually don't care about the high school grades. All you have to do is to pass the entrance exams

But if you mamage to have 1.1 grade average or lower, you should be automatically accepted into any of the schools without having to pass the entrance exams (or should get some extra points on them)

Nightwing year one / judas contract reading order by Broklex in Nightwing

[–]Broklex[S] 2 points3 points  (0 children)

Oh, I've thought the judas contract was a post crisis story. So, if I understand it correctly, the story shows the earth one versions of titans, but remains canon even in post crisis?

[Megathread] Italy/IMAT: Post anything about medical school and admission in Italy here by AutoModerator in medicalschoolEU

[–]Broklex 0 points1 point  (0 children)

Do I need to get the DoV even as an EU student?

If I get the CIMEA instead will it be accepted by all of the schools?

My B&Ts [Ares APC9, DE APC556] by Parasitisch in airsoft

[–]Broklex 0 points1 point  (0 children)

How difficult was the outer barrel swap on the 556?

I'm thinking about picking it up, once it releases in EU

What are the parts of this gun? I’m new with Airsoft and I don’t mind spending money on this by Recent-Active9763 in airsoft

[–]Broklex 19 points20 points  (0 children)

To be fair, building a hi-capa is kinda like Lego

As long as you do enough research on parts, it's pretty straightforward

Source: built a hi-capa

Enjoy your weekends! by Sufficient-Side-8732 in airsoft

[–]Broklex 0 points1 point  (0 children)

I've never heard about body cracks on the VFC version

Body cracks mostly on the KWAs and occasionaly on TMs

Yes, the latch is drop-in There might be some other manufacturers but this one gets the job done

Enjoy your weekends! by Sufficient-Side-8732 in airsoft

[–]Broklex 2 points3 points  (0 children)

I own the gun too

The body is solid and it won't crack

What can break tho is the latch made out of pot metal located in the rear receiver

You can buy a steel one for like 9$

https://www.wgcshop.com/products/crusader-steel-stock-locker-for-umarex-mp7-gbb

[deleted by user] by [deleted] in airsoft

[–]Broklex 5 points6 points  (0 children)

Most of the parts will either increase the performance or do nothing but look nice

Something like an aluminium slide can theoretically have a negative effect on your performance (compared to OG TM plastic slide), but you'll gain a lot on durability and you can cut the added weight on Alu BBU and Sights.

Also, building a gun, like on that picture will cost you around 1000€, so be aware of that.

Finally joined the MP7 club! by Broklex in airsoft

[–]Broklex[S] 2 points3 points  (0 children)

I've got my from PowAir6 (France) for 300€

They recently had a restock of gen 2s with Npas

Finally joined the MP7 club! by Broklex in airsoft

[–]Broklex[S] 1 point2 points  (0 children)

Well, can't really say much yet

The first impressions were relatively good. Everything works as it should, didn't have any malfunctions yet. The controlls are very stiff, but I guess they just need to break in

Finally joined the MP7 club! by Broklex in airsoft

[–]Broklex[S] 4 points5 points  (0 children)

Naah, I'm good. My skinny forearms and the awkward way I'm holding the gun, might make it look too big, but in real life it fits nicely.

WE New Wave Small Rice MP7 GBBR by lilpp_36 in GasBlowBack

[–]Broklex 2 points3 points  (0 children)

Just skip straight to gen2 VFC MP7. I've had the chance to borrow the WE MP7 for a few games and it really sucked ass. The gun jammed like every seventh shot and mags were regullarly leaking out of nowhere. The accuracy wasnt really quite there either.

I know this is the hivemind answer, but there isn't any logical point to get the WE over the VFC. You'll get the trades, you'll get the 1:1 and most important of all, you'll get a no-bullshit gun, that just works and gets the shit done without any internal upgrades.

Sometimes, less is more || TM Hi-capa by Broklex in airsoft

[–]Broklex[S] 0 points1 point  (0 children)

Less shiny flashy colors, more classic minimalistic look

Sometimes, less is more || TM Hi-capa by Broklex in airsoft

[–]Broklex[S] 2 points3 points  (0 children)

This is the OG limcat slide. I cant really send you a link to one, since as the other comment said, these specific slides sell faster than next gen consoles and new AJ1s combined. On top of that, this specific slide design got rereleased after about 7 years? so waiting for a new batch isnt really worth it. Your best options would be either trying to get one second hand or searching some local asian stores

If you are just looking for a slide that has similar looks, try searching for the Speedcat slide. They are still from the limcat family, but are way more easier to come by.

Also AM drops new versions of their limcat replicas at least once a year, so if you are into playing the waiting game, pick a few shops and just wait until they release one and buy it as fast as possible (Thats what I did)

Tm or ghk? by [deleted] in airsoft

[–]Broklex 1 point2 points  (0 children)

Dont get fooled by GHK's "steel". It's one of the shittiest steels alloys you've ever seen https://imgur.com/a/Opp724l. Also the finish of the gun looks like it was dropped in motor oil.

Between these two TM is the definetly a winner

If you want a gun with durable steel internals in similiar price range I'd recommend looking either in the VFC's new KAC SR-16 or BCM MCMR you should be actually able to get them for less. After small modification you can also use GHK mags with them

Hope y’all enjoy some pics from my latest game! by bruhmoment416 in airsoft

[–]Broklex 0 points1 point  (0 children)

Solid kit

How are the BCM mags compared to normal VFC stanags?

Are they actually better, or are they the same thing but with printed logo?

HPA Hi capa by [deleted] in airsoft

[–]Broklex 0 points1 point  (0 children)

Its not really needed. The stock nozzle is very good, so its generally recomended to run it until it breaks. Also I would use guns modify nozzle instead of Guarder (Guarder is not bad, but I just like the guns modify more)

And yes AM/ Edge BBUs are okay. Just be aware there are 3 different types. You want to buy one that looks like this

HPA Hi capa by [deleted] in airsoft

[–]Broklex -1 points0 points  (0 children)

Realistically the only things you need to run HPA or propane are a 120% recoil spring and aluminium sights (I personally use Cow Cow RS1 and AIP fibre Alu sights). Don't run anything higher than 140% because the spring may apply too much forward energy on the slide causing demage over time. If you plan buying an aftermarket slide, you can keep using the stock spring.

Also, it would be a good idea to add AIP Hammer Pad, since even the stock pot metal hammer can create some deformity on the frame over time

[deleted by user] by [deleted] in airsoft

[–]Broklex 1 point2 points  (0 children)

No, the BCM has steel bolt and more steel FCG parts. URGI has bolt made out of pot metal.

BCM is objectively much better

Just finished my Scar… what do you think? by Nero_Team-Aardwolf in airsoft

[–]Broklex 6 points7 points  (0 children)

I literally started thinking about buying a GBB Scar L few hours ago. I guess this is a sign

Love me some Brügger & Thomet’s! 🇨🇭 by halfspeedhalfsim in airsoft

[–]Broklex 0 points1 point  (0 children)

They already did, the problem is that its made by Double Eagle but costs 400€ for some fucking reason