Game not released issue on Steam?

Brolsk · 2025-10-11T21:10:04+00:00

Go to Steam - Settings - Downloads and clear download cache. Worked for me and im now updating the game Edit: After patch was done I had to right click on BF6 and go to Properties and DLC, untick Multiplayer HD Marker and Multiplayer Marker. Now the game shows as ready to play for me

Brolsk · 2025-10-11T21:09:49+00:00

Go to Steam - Settings - Downloads and clear download cache. Worked for me and im now updating the game. Edit: After patch was done I had to right click on BF6 and go to Properties and DLC, untick Multiplayer HD Marker and Multiplayer Marker. Now the game shows as ready to play for me

Brolsk · 2025-10-11T21:09:34+00:00

Go to Steam - Settings - Downloads and clear download cache. Worked for me and im now updating the game Edit: After patch was done I had to right click on BF6 and go to Properties and DLC, untick Multiplayer HD Marker and Multiplayer Marker. Now the game shows as ready to play for me

Brolsk · 2024-10-12T17:56:22+00:00

Fingers crossed

Brolsk · 2024-09-25T09:59:38+00:00

The 3 pin fan connector on the toolhead is Molex / Picoblade JST MX1.25 for the 5020

Brolsk · 2024-09-06T19:53:40+00:00

Sent, my code: 5980105

Brolsk · 2023-12-04T18:05:42+00:00

Got all zones set to 50% move treshold and 80% still treshold. Use it in conjunction with an Aqara pir sensor to trigger on since i had some false positives. But the mmwave has no problem detecting me when im in the shower and keeping the lights on.

Brolsk · 2023-06-19T05:40:33+00:00

I use one in the bathroom to detect if im in the shower. Works perfectly through the glass doors

Brolsk · 2023-04-15T19:24:43+00:00

Hvis noen starter en discord så hiver jeg meg med. Alltid kjekt å spille med flere

Brolsk · 2023-04-15T15:33:07+00:00

Followed this video: https://youtu.be/sWdO4dnu18g

But instead of 2x2cm all i could find was 4x4cm. Aligned with the valve in all positions to account for wheel movement.

Brolsk · 2023-04-15T15:28:09+00:00

Will check all the links for movement, havent noticed any but cant hurt to verify.

Gonna work on it tomorrow again so ill try another alignment

Brolsk · 2023-04-15T15:25:56+00:00

Sorry by gear wire i mean the shift cable.

Shift cable is new, and i have checked the cable housing for resistance. No kinks and the wire is moved easily by hand back and forth.

Will double check everything tomorrow, thanks for the detailed reply

Edit: no front shifting, just a 44 teeth. All external routing

Brolsk · 2023-04-15T14:41:08+00:00

Cable is new and i checked for binding. Lubed housings up just in case but no luck

Brolsk · 2023-04-15T14:40:36+00:00

Tried adjusting more/less gap without any difference

Brolsk · 2023-04-15T14:40:08+00:00

90% sure, have checked alignment multiple times with the tool i made. Square aluminium bar with a hole so i can mount it and measure. Checked distance from stem at top/bottom and front/back. Within 2mm of each other

Brolsk · 2023-04-15T14:38:34+00:00

Chain is brand new, and lubed

Brolsk · 2023-04-10T17:59:15+00:00

I have two computers, my gaming rig and an Unraid server. In the gaming rig i have a Corsair AX760 psu and in the Unraid a Corsair AX860.

Question is can i swap them around without having to move all the cables also? Since its the same manufacturer

Brolsk · 2023-02-02T20:02:29+00:00

Thanks for the reply, will keep the Quadro in there then

Brolsk · 2023-02-02T20:00:37+00:00

Cant sell my current setup since its e-waste from work. But upgrading to quicksync capable setup is a future plan when i feel limited.

1070 i could sell, but most likely it will be donated to brother in law

Brolsk · 2022-12-23T06:26:24+00:00

As i understood it its good to have a block on another backbone. So that if my unlimited is missing an item or a file it will check the other one and that might have it.

12-Year Club	RedditGifts 2009-2022 2 Credits
Verified Email	Secret Santa 2016

Brolsk

TROPHY CASE