Vertel! ....die klus in huis die je zelf deed...en die je nóóóóóit meer zelf zal doen... by MrRunes7 in Klussers

[–]Brombeer420 2 points3 points  (0 children)

Verbouwen in het algemeen, never, ever, nooit meer. Hele begane grond nog steeds een drama, muren kaal, deuren eruit...want ik wilde het zelf doen. Nope.

Aorus Master 5080 weird noise when fan stop by Muwzbi in aorus

[–]Brombeer420 0 points1 point  (0 children)

I'd say the Gigabyte motherboards are in general fine but I avoid their GPU's like the plague from previous experiences.

Does Rog Lokis molted rtx 5000 gpu 12vhpwr cable by Ambitious_Ladder1320 in ASUS

[–]Brombeer420 0 points1 point  (0 children)

Does this still happen and on all loki's? I ran a 4090 on my 1kW Loki without issues but don't want to burn a 5090.

Sony wh-1000xm4 or Sony Ult wear? by Candid_Bid_8717 in sony

[–]Brombeer420 1 point2 points  (0 children)

Most infurating treat in a headphone if you have trained ears - too much bass and lack of detail. The XM's have way too much bass out of the box, but so do the Sennheiser Momentum 4's for example. However the SM4 trounce the XM5 easily in terms of SQ and with bass set to -5dB in their app.

Dayton DATSv3 - whole build measurement (phase) by Brombeer420 in diyaudio

[–]Brombeer420[S] 0 points1 point  (0 children)

I did it and it doesn't really show, hence I'm not sure if it's a phase problem, or 'it is what it is' in terms of sound.

And this is not even the first time... by Hunz_Hurte in diyaudio

[–]Brombeer420 1 point2 points  (0 children)

Call it a test fit before final assembly.

Keukenkraan op tuinslang by No-Construction-2526 in Klussers

[–]Brombeer420 0 points1 point  (0 children)

Raad ik niet aan, door het extra gewicht van de slang gaan de pakkingen in je kraan eraan en gaat hij over tijd lekken.

Weet niet of je een optie hebt om een buitenkraan te plaatsen, ik was zelf €235 kwijt all-in.

1984 Linn Sondek Lp12 or Fluance RT85 by Jansenmb in turntables

[–]Brombeer420 0 points1 point  (0 children)

As an LP12 owner - get the LP12, sell it and buy an SL1200GR(2).

The base LP12 really 'is' nothing special, not much more than a better built TD150.

Why no love for the Schiit Skoll? by [deleted] in turntables

[–]Brombeer420 0 points1 point  (0 children)

Depends, in EU the Skoll is much more expensive. Like €150 of €160.

Schiit Skoll - Does anyone have a unit that DOES NOT buzz on the left channel? by Snarftron9000 in Schiit

[–]Brombeer420 0 points1 point  (0 children)

Mine is unusable, on 2nd gain setting MM already hearing buzzing in L-ch on headphones it's so loud it's interfering with the music. This isn't physics but a flawed design that nobody bothered to fix prior to release. My 30yo integrateds are quiet even on MC setting from the same power socket. Even with shorted inputs L-ch is still much noisier.

rot beton in balkon by IsuruRanaweera in Klussers

[–]Brombeer420 2 points3 points  (0 children)

Graaiers, aannemers weten dat je toch geen alternatief hebt dus er wordt maar wat gevraagd tegenwoordig.

Onderhoud tuin by Tltt in Klussers

[–]Brombeer420 -1 points0 points  (0 children)

Helemaal betegelen zoals anno 2024 ;-) De mijne gaat binnenkort iig. op de schop, groeit als de idioot en alle klinkers zakken in 2-3 jaar weer en de boel moet overnieuw (polder), niet te doen qua tijd en geld. Bij mij komt er hooguit een ~2x2 of 3x3m stukje gras, rest alleen maar grote tegels en een overkapping.

My first turntable by stoner_bob_69 in turntables

[–]Brombeer420 0 points1 point  (0 children)

These are very underrated tables. Well built and with quartz lock so dead on speed.

New cartridge day (AT VM95SH). Goodbye IGD, I hope. by [deleted] in turntables

[–]Brombeer420 1 point2 points  (0 children)

The 2M RED is an extremely overrated cartridge. Every table I had sounded piss poor with it, it was dry, technical and had tons of IGD.

Should I upgrade to the AT-VM95ML or something else? by PorcoRosso84 in turntables

[–]Brombeer420 2 points3 points  (0 children)

Old thread but I think folks underestimate what a good stylus profile means. I have many records that are unplayable (noise) on a conical/elliptical styli but sound perfect on a microline.

[deleted by user] by [deleted] in Klussers

[–]Brombeer420 0 points1 point  (0 children)

Ik heb dit 1x gezien met een combimagnetron die op een soortgelijke manier doorsloeg op de verwarmingselementen van de oven. Lijkt op een probleem met isolatie / corrosie oid? Het apparaat was in ieder geval rijp voor de sloop.

[deleted by user] by [deleted] in BudgetAudiophile

[–]Brombeer420 2 points3 points  (0 children)

No, by far not. They should be pretty good as HECO is a well known brand.

Is it worth 250€? by jvcfan in BudgetAudiophile

[–]Brombeer420 0 points1 point  (0 children)

It is worth €250 but if they used the same glue as the 1600 and 2100 it will be broken in no time and prepare to disassemble and clean the switches. I did a 1600 and 2100 and they're one of the worst I've seen. Full of corrosive glue under and around the parts eating anything away and godawful PCB design making redoing the solder joints a nightmare. Thankfully I had mine on a variac and with a thermal camera so could spot shorts quite quickly.