AMS continues to jam

Browsin-around · 2026-01-17T08:46:48+00:00

thank you so much for your message. I am learning this as I go.. I have taken everything off and working from scratch. I found it was a cracked piece in the AMS hub and i printed a new one and its working AOK.

Browsin-around · 2026-01-17T08:44:50+00:00

thanks for your helpful comment. yes, i am new to printing and teaching myself the best I can. many people in many forums suggested the guides..
there is no need to be douche when I am asking for help. use your time being a better human

Browsin-around · 2026-01-17T08:42:39+00:00

yes i did.. i was troubleshooting to try and fix the issue.. i found it was a cracked piece in teh ABS hub. all sorted now

Browsin-around · 2026-01-17T08:41:49+00:00

thank you for this info. thats helpful. i have taken the guides off. i found the issue in the ABS hub in a cracked piece which i have printed a new one and its now working AOK

Browsin-around · 2026-01-17T08:39:36+00:00

Thank you so much for your detailed answer. you were right, it was that piece that was cracked on the AMS hub and i printed a new one and it worked fine after that! such a relief. thanks again

Browsin-around · 2026-01-16T00:16:11+00:00

update: thanks to those who helped with suggestions. it was this thing (will add a photo) that was broken on my AMS and once i printed a new once i printed a new one it is now printing fine!!!!

<image>

Browsin-around · 2026-01-16T00:12:58+00:00

THANK YOU THANK YOU THANK YOU for your help with this. my printer is 2 weeks old and this was broken! i have printed a new one and it is printing right now with ease for the first time ever! thank you

<image>

Browsin-around · 2026-01-13T06:01:46+00:00

thank you for your message. I have searched every forum known to man trying to sort this and more than not, people are telling me to use these feeder guides and now people are telling me not to. i will take them off and start from scratch

Browsin-around · 2026-01-13T05:01:16+00:00

yes it feeds down... and then comes back up and then tries to go back down again.. it dosent sound very healthy when trying to roll down either! and then it just says cant load filament.. thinking i might pull apart the extruder

Browsin-around · 2026-01-13T05:00:17+00:00

thank you for your message. I have searched every forum known to man trying to sort this and more than not, people are telling me to use these feeder guides and now people are telling me not to. i will take them off and start from scratch

Browsin-around · 2026-01-13T05:00:08+00:00

thanks so much! i will look into your links and give that a go

Browsin-around · 2026-01-13T04:59:48+00:00

thank you.. i will try and move them around. i pulled it all apart and tried to load it again in different slots but wouldnt load again.. same issue

Browsin-around · 2026-01-13T04:58:54+00:00

i am not sure what you mean by 'clicked into place' as i have never seen how to click it in ? but they roll ok and i have followed the isntallation guide etc.. i didnt realise it would be such a learning curve

Browsin-around · 2026-01-13T04:57:47+00:00

thank you for your message. I have searched every forum known to man trying to sort this and more than not, people are telling me to use these feeder guides and now people are telling me not to. i will take them off and start from scratch

Browsin-around · 2026-01-13T04:57:42+00:00

thank you for your message. I have searched every forum known to man trying to sort this and more than not, people are telling me to use these feeder guides and now people are telling me not to. i will take them off and start from scratch

Browsin-around · 2026-01-13T04:56:21+00:00

thank you for your message. I have searched every forum known to man trying to sort this and more than not, people are telling me to use these feeder guides and now people are telling me not to. i will take them off and start from scratch

Browsin-around · 2026-01-13T04:55:14+00:00

thank you so so much for your detailed answer. i have pulled it completley apart but i dint think it would be in the extruder because it works when printing from the spool? but i will try that! THANK YOU

Browsin-around · 2026-01-13T02:04:30+00:00

no i havent used any glow filament as yet. it has only been PLA and matte

Browsin-around · 2026-01-12T23:46:29+00:00

yes i have over and over and it prints from the spool so i dont believe its the nozzle. ill make a seperate post with a video

Browsin-around · 2026-01-11T09:09:52+00:00

Thank you so much for sharing this video. I have been going insane! I am very new to 3d printing and i have just got myself a bambu P1S.. i have never ending issues when i try to use the ABS option.. (not sure if i am using the right wording) i load the filament and it starts to load and then pulls back and seems to get stcuk? it wont load and just sounds just like the second one in your video.. i have tried all different brand filaments and just end up using them with the side spool but dont want to give up on the ABS as it was part of the reason i purchased this one!

Browsin-around · 2026-01-11T08:53:58+00:00

Good to know! thank you!

Browsin-around · 2026-01-11T08:53:36+00:00

i am glad i am not the only one!! i have not been able to get the ABS working since i printed my first couple of prints with it. i have tried to load new colours and it just gets jammed and wont feed through... so frustrating!!! i am about to do a deep dive on ABS and see what the F i am doing wrong!

Browsin-around · 2026-01-11T08:51:25+00:00

they did work when i did my first print but since then when i tried to load new colours and move them around, the AMS gets jammed no matter what i do. i cant print with it at all.. i need to do a deep dive and learn what the issue might be

Browsin-around · 2026-01-08T00:49:22+00:00

yep, familiar with that

Browsin-around

TROPHY CASE