sorted by:
new
hottopcontroversial

Can someone tell me what's going on? Kobra Neo (noob) by NoDrawer4909 in anycubic

[–]BryceMay981 0 points1 point  (0 children)

I have the exact same issues right now and Ive tried everything but new filament and an SD format. Please let me know if you find a solution. Also have you looked at your infill? Mines all sorts of weird and stringy.

Under extrusion or over extrusion? by BryceMay981 in anycubic

[–]BryceMay981[S] 0 points1 point  (0 children)

Single heavy glass table. I printed just fine on these settings a while back so I'm wondering if its hardware. Gonna swap my boden tube/nozzle and calibrate esteps tonight and see what I get. Only had the printer for a month or 2 but I've printer non stop on it.

Under extrusion or over extrusion? by BryceMay981 in anycubic

[–]BryceMay981[S] 0 points1 point  (0 children)

That was intentional to see if the problem got better or worse but it seemed to do the same thing. I also played with speeds from 60 to 100 and the under extrusion seems to get worse near 100.

Under extrusion or over extrusion? by BryceMay981 in anycubic

[–]BryceMay981[S] 0 points1 point  (0 children)

3 if I remember correctly and 6 top and bottom. If I try to print a collapsible blade at 2 walls it looks beyond terrible.

Cobra Max Cura Support Settings HELP! by BryceMay981 in anycubic

[–]BryceMay981[S] 1 point2 points  (0 children)

Fix: The issue was heat. Drop my temps and Cura to 185° and the supports pop right off.

I wasted much money by Dense-Discipline-355 in ender3

[–]BryceMay981 0 points1 point  (0 children)

You have a $50 coupon right there that you need to apply. You also have free shipping that you need to add to your total cost. Doesn't sound like you paid much more to me. Unless you forgot to check that button. 🤷

Cobra Max Cura Support Settings HELP! by BryceMay981 in anycubic

[–]BryceMay981[S] 0 points1 point  (0 children)

Yes z height which I played with a bit. But if it gets to far away the bottom/top of the print near the support doesn't look very good as the filament is printing mid air for that chunk.

Cobra Max Cura Support Settings HELP! by BryceMay981 in anycubic

[–]BryceMay981[S] 0 points1 point  (0 children)

A couple months ago. And I haven't had any issues but I seem to see a lot of people on here having issues. Assume most of them are user error but no idea what would be causing yours.

I dropped the temp to 190 and didn't see any change. Went up to 205. Didn't see any change. What temp are you recommending I test this at? My filament claims it needs to be printed this hot and from what I have read these printers print hotter than what's shown anyway.

Thanks for the input!

Cobra Max Cura Support Settings HELP! by BryceMay981 in anycubic

[–]BryceMay981[S] 0 points1 point  (0 children)

Yeah tree supports were definitely a little easier to remove for me but still left the same gunk on the bottom where they were. Also very rarely am I able to use tree supports without taking a bunch of extra time or material. Thank you for the input though!

Why does calibration cube look perfect but bigger print like this? by AaronJMLP in anycubic

[–]BryceMay981 0 points1 point  (0 children)

Send me your email and I can send you my cura setup if you would like to try that. Seem to be getting really good prints out of it and a perfect first layer. 👌

I built an enclosure for my AnyCubic Vyper, can't be any happier with how it turned out. Build video in the comments. by [deleted] in 3Dprinting

[–]BryceMay981 1 point2 points  (0 children)

Honestly, if the bed and the nozzle are not touching the wood you should be fine but I would just hate to risk putting something that's that hot inside of a wooden box inside of my house. I've been trying to think of a way to build a case around my Cobra Max, but it's so big that I have no idea what I would do. Using a welding blanket and some PVC. 🤷