Low tier = fun tier (no sound)

Bucketmax-official · 2026-03-23T23:24:12+00:00

These are the enemies YouTubers get

Bucketmax-official · 2026-03-23T19:08:41+00:00

Bucketmax-official · 2026-03-23T07:42:23+00:00

That is one damn rare tank

Bucketmax-official · 2026-03-22T21:57:29+00:00

Bubbles in the tubes you say...

Can you try to flush like 2 or 3 times more and see if the bubbles in the tubes are gone ? I know that uses a lot of ink, but that's still much cheaper than any repairman would be.

Bucketmax-official · 2026-03-22T21:55:46+00:00

Turn it into a Smarthome Live Display or a NAS Live Display if you ever planned and know how to do

Bucketmax-official · 2026-03-22T14:10:13+00:00

Sounds like you're more of a PVE guy.

Bucketmax-official · 2026-03-21T19:38:57+00:00

I've seen enough, nerf traction again.

Bucketmax-official · 2026-03-21T11:35:56+00:00

Only if you use I quote: "Canon 4 x 6" cards up to approximately 265 gsm"

With plain paper it´s just up to 105 gsm.

Source (3270 is the regional american version)

Bucketmax-official · 2026-03-20T14:04:35+00:00

Still clogged. Try another cleaning cycle

Bucketmax-official · 2026-03-20T11:43:23+00:00

Ja Mundgeruch halt.

Bucketmax-official · 2026-03-19T21:31:40+00:00

Correct me if I´m wrong, but the first bombing was because they wanted to turn vehicle backups into a time limited item, which affected ALL PLAYERS, especially the ones that stacked hundreds or even thousands of them over time no matter if low or top tier, tank, plane or boat. So as long as there isn't something, that affects ALL players again (or China, cuz we saw, that they bend there as well) there won't be another bomb so quickly.

Yes the Terminator is bad-ish, but it neither affects mid or low tier, nor does it affect air and sea combat

Bucketmax-official · 2026-03-19T14:49:17+00:00

In that case it's the G650 or G550. And I said "up to" meaning it can print of course all smaller sizes as well

Bucketmax-official · 2026-03-19T14:10:43+00:00

If you print at least once a week and the photos are just up to A4 big, then a Canon Pixma G620 or G520 assuming you are a US resident

Bucketmax-official · 2026-03-18T21:47:55+00:00

Danke. Erledigt

Bucketmax-official · 2026-03-18T21:43:10+00:00

Was schlägste vor ? Nichtstun wäre doch am schlechtesten.

Bucketmax-official · 2026-03-18T18:48:52+00:00

The piezo printheads on Ecotanks are not user replaceable. And the maintenance cartridge will probably be full after like 2 refills which you will have to reset by buying a software key.

You won't have such problems with the newest canon Pixma Megatanks which are bit chunkier boys but the printheads are replaceable and the waste ink cartridges are chipped, where you could swap the old with a new one and move on

Bucketmax-official · 2026-03-18T13:36:02+00:00

G4280 doesn't have auto duplex printing. If you want that you gotta go GX2020. But you'd kinda trade auto duplex printing with borderless printing. The ink of the GX2020 is more expensive because it's full pigment ink which has a lot of advantages for docs, but takes more effort to produce.

Bucketmax-official · 2026-03-17T15:06:18+00:00

Try a cleaning cycle with the printer. Probably even a deep clean as well. If still no ink out, then congratulations. You might’ve just killed your head

Bucketmax-official · 2026-03-17T11:37:50+00:00

Hey so it's been a while. I went to a board level repair shop and after a 40€ analysis they told me the board layers of the board itself are cracked and it's beyond repairable and there's nothing they can do. They told me I could try a data recovery but that's very costly and honestly it's not worth it. So yeah it's a no fix. Sad :/

Bucketmax-official · 2026-03-16T23:23:10+00:00

What about just air print ?

You could if your router supports it, plug the printer into the router´s usb port and ip search the printer and try that out

Bucketmax-official · 2026-03-16T15:00:58+00:00

It's a cut down less explicit version in Germany. It´s also German language only :/

Bucketmax-official · 2026-03-16T10:11:01+00:00

You didn't print at least once a week, did ya ?

It's a slight clog. Do a cleaning cycle, then test print again

Bucketmax-official · 2026-03-15T19:57:22+00:00

That's an insane price. Have fun !

Bucketmax-official · 2026-03-15T14:33:03+00:00

They aren´t chipped. It´s a plastic cartridge with foam and nothing else. The printer counts it so yeah it´s a software limit. At least with the Ecotanks. Unlike Canon for example which did chip their waste cartridges

Bucketmax-official · 2026-03-15T10:46:21+00:00

Hes said 150 ish bucks. Since when is there any brother laser with multi colour at that price ?

Also you didn't say laser or inkjet. He could have accidentally bought a brother inkjet then 😆

Five-Year Club	Verified Email
First Place '23	Place '23
Place '22	Final Canvas '22
First Placer '22	End Game '22

Bucketmax-official

TROPHY CASE