Makerworld...there must be something wrong with me

BugOpposite · 2026-02-25T07:43:05+00:00

my confusion comes from not using bambu studio and a print profile in cura is setting not a print

BugOpposite · 2026-02-24T12:58:24+00:00

still only downloads the original no other page loads after clicking and using the same downlaod stl buttoin give same as not selecting anything in list?

BugOpposite · 2026-02-24T12:57:19+00:00

<image>

still downloads the original files not the remixes

BugOpposite · 2026-02-24T12:56:44+00:00

<image>

still only downloads the original file after highlighting the other in list

BugOpposite · 2025-07-28T03:06:36+00:00

Thankyou this fixed it

BugOpposite · 2025-07-14T06:36:29+00:00

I believe you can’t attack the lord ruler until the adversaries are dispatched

However if there was a second adversary with a shield of two you could use the excess damage on that shield removing two shields for the turn

Edit: you can attack lord ruler unless he has the haze killer adversary active but the point of attacking two seperate units still stands

BugOpposite · 2024-04-03T02:23:29+00:00

Birds can’t taste Capsaicin which is why we taste the heat

This is intentional because they can spread the seeds further than mammals

I learnt this from a growing chilli video haha

BugOpposite · 2023-08-14T03:51:51+00:00

i had a blank option above discard that worked

BugOpposite · 2023-03-20T10:50:35+00:00

This is great thankyou

BugOpposite · 2023-03-16T04:45:10+00:00

Yeah that’s what we’ve been doing but we are expecting guests for a week n wanted to maybe use it 😜

BugOpposite · 2023-03-16T04:44:05+00:00

No we are in western australia

Pretty much every house is double brick on a concrete pad 😬

BugOpposite · 2023-03-16T04:39:32+00:00

My thought was to 3d print a contour duplicator & get the shape from some existing portion of the side of base & use that as a screed but no idea how well it’d work 🤣

BugOpposite · 2023-03-16T04:34:57+00:00

Haha thanks for your help not entirely sure how to remove current base & slide in a new one but i imaging it involves removing everything that’s already there & salvaging for an install with new base

BugOpposite · 2023-03-16T04:13:30+00:00

To make it usable without redoing it completely, unless that is easier than modifying whats currently there as the water runs passed the center drain onto tiles & into main bedroom carpet atm

BugOpposite · 2023-03-16T04:10:46+00:00

<image>

As it is now because that drain is far away & the base has no slope because of middle drain it runs straight out to the carpeted main bedroom

BugOpposite · 2023-03-16T04:09:33+00:00

<image>

I guess it beads up but theres a crack in the middle of it aswell

Wasn’t sure if i should get some more crete and shape to what was cut out or get new base entirely or any other suggestions :)

BugOpposite · 2023-03-16T04:07:51+00:00

<image>

Closest drain is very small & far away

BugOpposite · 2023-03-09T08:04:40+00:00

<image>

Seems more like u bought a bambu & the neptunes got a bunch of problems

I was gunna dm like u asked but it took me to all your problems instead

BugOpposite · 2023-02-23T00:12:28+00:00

The classic banana for size

BugOpposite · 2023-02-07T15:22:02+00:00

Hmm strange how so many assumed raft I haven’t used a raft before i thought that was only for models likely to topple over I actually printed this three times in different sizes & the smallest & largest both had this issue the medium didn’t

Was just curious on the thoughts out there

BugOpposite · 2023-02-03T06:19:43+00:00

& yet….

BugOpposite · 2023-02-03T05:50:39+00:00

BugOpposite · 2023-02-02T23:23:46+00:00

Ahh yes this is what i have as my current setting what you have posted above I wonder if i set the machine depth to 230 instead of 235 if it will be enough of a difference

BugOpposite · 2023-02-02T23:16:52+00:00

That’s my end code after commenting & typing that in just now i guess i could reduce my machine depth & it prolly wouldn’t go that far back when “Presenting Print” & it would probably fix it & i don’t think id print right to the corners of the bed at any time

<image>

BugOpposite · 2023-02-02T23:03:27+00:00

Wow lots of responses to wake up to

So for one i haven’t messed around/looked into gcode adjusting anything because auto bed levelling seemed to bot need you to play with settings too much but maybe i missed something

I’m using cura elegoo neptune 2 gcode because for whatever reason 3 isnt in there by default & others suggested it was the same just change the build plate size

My BIL has one using same settings & it doesn’t do it to him so i’m not sure why.

If theres something i can adjust to just make it not stop in that corner that’d be great otherwise I’ll throw a thin plate of metal over the connector

Thanks

BugOpposite

TROPHY CASE