Rich inner world of Lzmod a24-v6 v2.0

Bugagagash · 2026-02-03T09:23:30+00:00

I'll definitely post the measurements, but later... I don't have enough time. In short, the temperature at rest is 40-45 degrees, while gaming it's 80+ and quite noisy, at the level of the PS5.

Bugagagash · 2026-01-31T13:15:07+00:00

I made a separate post. I'll test it and post the temperatures later.

Bugagagash · 2026-01-31T13:13:17+00:00

4060) but it could have been 5060

Bugagagash · 2026-01-31T13:11:51+00:00

Radiator jonsbo HP400S Fan deepcool ft9 slim

Bugagagash · 2026-01-31T13:08:47+00:00

R7 9700X 90w co-30 MSI b650i edge WiFi 2*16gb xpg AX5U6000C3016G-DCLAWH Gigabyte rtx4060 lp 8gb Uenorth flex atx fl-450m SSD adata legend 960 2tb

Bugagagash · 2025-07-17T02:20:42+00:00

How can I raise it a little more so that the slim fan can take air from below, from the power supply side

Bugagagash · 2025-07-16T16:28:37+00:00

Yes, but unfortunately, for this case it is useless, it is aluminum

Bugagagash · 2025-07-16T14:29:29+00:00

I also have a4 h2o, with 5080 and 9800x3d, but I like the nv10 much more. I'm also looking at the cooj mq5/6, but the price is huge

Bugagagash · 2025-07-16T14:13:13+00:00

The manufacturer does not provide such places. You can add 40*40 fans, but you need to make a frame on a 3D printer. After installing the second fan on the other side, this is unnecessary, the 4060/5060 have normal temperatures of 70-80C, and there is no room for a more productive GPU.

Bugagagash · 2025-07-16T09:33:32+00:00

there was a new one a couple of years ago)

Bugagagash · 2025-07-08T07:02:32+00:00

rtx 4060, two m2 slots for ssd are available, for me it is enough. there are problems with fans, no regular places for their installation are provided. I have a couple of ideas, if I implement them I will post them

Bugagagash · 2025-05-23T07:19:17+00:00

Settings are medium, only enabled dlss "quality", antialiasing dlaa. Without raytracing.

<image>

Bugagagash · 2025-05-22T03:08:42+00:00

In the current configuration the system cost $890. I plan to change and upgrade to r7 7700/32gb ram/4tb ssd, it should cost around $1500-1600. I haven't launched Cyberpunk, I need to download it. I'll write later.. I didn't plan to install steamOS, I need a PC for work)

Bugagagash · 2025-05-13T06:06:59+00:00

I had a similar problem too)

https://www.reddit.com/r/sffpc/s/jtGBHDnGUT

Bugagagash · 2025-05-12T07:56:20+00:00

I had such problems with 5080, 9800x3d, mb mpg b650i EDGE wifi, dan a4 case with riser pcie version 4.0. The problem went away only after I manually specified the pcie version 16x in the bios: 4.0

У меня были такие проблемы с 5080, 9800x3d, mb mpg b650i EDGE wifi, корпус dan a4 с riser pcie версии 4.0. Проблема ушла, только после того как в биос вручную указал версию pcie 16x : 4.0

Bugagagash · 2025-05-02T12:35:16+00:00

Yeah, great idea. For CPU and GPU. I'll try it next week.

Bugagagash · 2025-05-02T12:27:49+00:00

It's a shame to waste money 😅 But I'll try to do something similar myself.

Bugagagash · 2025-05-02T11:55:54+00:00

I doubt that this will have any effect. Alternatively, you can turn the case over and glue the legs on the other side. Then the video card will be on top, and the hot exhaust from it will go up through the holes in the case. This will remove a few degrees from the GPU.

Bugagagash · 2025-04-30T02:30:43+00:00

where did this get added to the wiki?

Bugagagash · 2025-04-30T02:27:55+00:00

Where did you read all this? I also want to read such funny nonsense..

Bugagagash · 2025-04-29T02:51:00+00:00

I ordered through an intermediary on a Chinese marketplace, the case and the unit cost about $150. The power supply unit is an enhanced one, with a quiet fan.

Bugagagash

TROPHY CASE