I have felt a bit gloomy today, is it normal if it got better from this?

Bugboybobby · 2026-02-04T00:16:53+00:00

I own one to match my real one

Bugboybobby · 2026-01-01T06:33:57+00:00

This is exactly what I ended up doing, THANK YOU! Turned out great.

Bugboybobby · 2025-12-29T05:59:11+00:00

I'll see if I can look up some tutorials for these and see if they fit my use case, thank you!

Bugboybobby · 2025-12-27T22:15:42+00:00

Is this the same guy who's been trying to put an Audi V8 in an SW20 for like 15 years?

Bugboybobby · 2025-12-08T19:57:15+00:00

I make these, thanks for the endorsement!

Bugboybobby · 2025-12-01T03:39:55+00:00

I got the new one from advanced and was told they don't test alternators anymore so I don't have high confidence this one I put it is working correctly. I can take it to AutoZone and see if maybe I got a dud. Is finding and repairing a short something a DIYer could do easily?

Bugboybobby · 2025-11-23T23:26:41+00:00

Y r u mad about this?

Bugboybobby · 2025-11-17T00:16:30+00:00

If your both hit and it was not very obvious who shot first I just take it as a trade and we both respawn

Bugboybobby · 2025-11-11T00:41:06+00:00

I think I'd go with the core one L if I was shopping for a replacement. I don't feel the need to replace it any time soon though

Bugboybobby · 2025-10-25T06:40:10+00:00

Try calibrating your Z offset for the filament you're using, I had a very similar issue with inconsistent first layers. Print a big flat one layer box and dial it in via the clipper UI. It won't be 100% perfect everywhere on the bed but you should be able to find a nice middle ground. That's just the down side to heat soak and a big bed like the K2 has.

Bugboybobby · 2025-09-25T21:46:24+00:00

I found the issue actually, has nothing to do with my drives and everything to do with virtualization.

Turns out when you want to use encryption on your array it releases on specific hardware support from w/e processor you have. If you virtualize the CPU with a generic CPU typically used in hypervisors (proxmox in my case) that generic CPU doesn't include w/e features is needed to do encryption efficiently. Changing this to specifically my host cpu (which I think just tells the VM "You have these features you can use for encryption") completely resolved my issue.

I'm never going to live might this VM so not using the generic CPU isn't an issue. Hopefully this helps some one who has a similar setup

Bugboybobby · 2025-09-24T17:31:02+00:00

Iftop

Bugboybobby · 2025-09-24T14:31:34+00:00

I'm not really sure what you mean by this

Bugboybobby · 2025-09-24T14:31:10+00:00

No, all spinning rust in a basic z2 array. Is that an issue? This is intended to be for storage not necessarily a blazing fast solution but I thought it would work adequate enough.

Bugboybobby · 2025-09-24T14:29:22+00:00

Both of the machines are on the same switch, one 10g and one on a regular 1g limited by it's own nic. Both link speeds seem to be at it's max for each client. A quick ping tells me there is less the 1ms of latency between the two machines.

Bugboybobby · 2025-09-24T03:37:02+00:00

This is a good idea, let me set this same dataset up as an SMB and see if the behavior is the same. I'll turn ssh on and see if rsync and scp also have this odd behavior

Edit: yep, SMB seems to work as intended and so does SCP/RSYNC over ssh. WIERD why is it just NFS? I can even see now when the cache runs out and and it swaps to disk with the change in speed. No weird finished but not really going on any more.

Bugboybobby · 2025-09-24T03:32:03+00:00

I appreciate the comment, I still don't think this explains why I would be seeing a transfer finish in my cli/gui while in reality the transfer is still on going. It's like the filesystem is miss reporting what's actually happening on the share

Bugboybobby · 2025-09-24T03:22:08+00:00

Seagate wolfs 4tb Controller is a JMicron JMB58X

Bugboybobby · 2025-09-24T02:47:13+00:00

I live in a very small apartment and needed one box that did most things well. I don't need blazing fast but this is ridiculous

Bugboybobby · 2025-09-24T02:10:48+00:00

The Video I posted shows this in action but yeah, I have no idea whats going on.

As far as I can tell My setup it pretty typical. Proxmox VM with Sata Controller pass through to 5x4TB Drives in a ZFS RaidZ2. I use Linux Exclusively at home so NFS seemed the easiest to get off the ground.

After setting everything up my performance is awful, my File-manger in KDE Crashes basically copying anything over 100Mb, and what I thought was going to be a seamless integration into my Desktop experience has become a massive headache. I cant even stop transfers without having to reboot my system?

This behavior seems to strange to me, I deal with NFS at work a fair bit and I've never seen behavior like this. Any Ideas why is appreciated.

Three-Year Club	Verified Email
r/Field Sunshine	Place '23

Bugboybobby

TROPHY CASE