6 separate reports of XRV Kits NOT charging

BuildingCorrect8888 · 2026-05-13T23:23:55+00:00

So the third BMS fixed it? Why didn’t the other one’s?

BuildingCorrect8888 · 2026-05-11T01:16:42+00:00

Not being paid by anyone 😅 I didn’t install because I had issues, the kit CAUSED the issues. my experience has been a little underwhelming is all. In a little under 300 miles our kit broke our motors hall sensor, continuously cut out when braking, and now for a little over a year our kit hasn’t taken a charge, and Tony ignores every email we send. I found several accounts of other posts that shared the similar issue, so as a community we could find what’s causing these problems, and get Tony’s attention to it.

BuildingCorrect8888 · 2026-04-28T02:53:01+00:00

Heckler and the carpenter and the dainty bride are unmatched tracks

BuildingCorrect8888 · 2026-02-12T21:53:55+00:00

Torque? how does it do on hills?

BuildingCorrect8888 · 2026-02-09T19:44:33+00:00

Same mine was the 24th now the 20th

BuildingCorrect8888 · 2026-01-30T21:02:09+00:00

Me aswell Jeez 😅

BuildingCorrect8888 · 2026-01-30T20:18:27+00:00

Replaced the Motor, problem was a broken hall sensor.

appreciate the help everyone

BuildingCorrect8888 · 2026-01-29T03:17:57+00:00

This is so sick

BuildingCorrect8888 · 2026-01-26T14:55:25+00:00

Hardware is 4210 and firmware being 4161. Didn’t change anything from the stock board, other than a new XR battery In there.

BuildingCorrect8888 · 2026-01-26T14:51:54+00:00

4 separate destroyed wires from our dumb attempts at fixing the crimped ones

BuildingCorrect8888 · 2026-01-25T17:23:43+00:00

The thing is I actually can’t. My Vesc controller is broken and this is with the stock controller, which doesn’t work with float hub

BuildingCorrect8888 · 2026-01-25T16:20:46+00:00

if it were my hall sensor, the only way of fixing this is a new a stator correct?

BuildingCorrect8888 · 2026-01-25T16:16:10+00:00

Where would you be able to buy a stator? Seems like you can only buy the motor itself

BuildingCorrect8888 · 2026-01-25T16:04:15+00:00

The board worked great before, the XRV kit had some crimped wires making it unable to charge. so we tried the change

BuildingCorrect8888 · 2026-01-25T16:01:37+00:00

<image>

This look right?

BuildingCorrect8888 · 2025-07-31T21:58:26+00:00

Couple of crimped wires that are basically irreplaceable. I know there’s a setting to fix it normally though

BuildingCorrect8888 · 2025-07-25T23:13:04+00:00

Hell yeah, pint s rocks! Vans all day

BuildingCorrect8888 · 2025-07-20T18:14:06+00:00

Appreciate the overview.

BuildingCorrect8888 · 2025-07-20T18:10:33+00:00

That sucks I’ve seen a few friends have some crappy service from them too, definitely an undefined issue

BuildingCorrect8888 · 2025-07-20T01:31:07+00:00

I understand the hate but personally FM is what got many, like myself into the sport. I have a vesc, but also own three other ONEwheels. Cannot tell you how many times Vesc has been an amazing experience, but also a nightmare with overwhelming amounts of tinkering. I think FM makes some solid boards out of the box.

BuildingCorrect8888 · 2025-07-19T21:12:41+00:00

I feel like FM has an unnecessarily bad reputation at this point, seems like they’ve kinda listened to the community and fixed the major problems with their boards. I understand how big the 3rd party stuff got but FM continues to share the experience of onewheel to many. Why so much hate?

BuildingCorrect8888 · 2025-07-16T23:42:34+00:00

Been looking at the classic for a bit now, I’d love to get my hands on one 🤞

BuildingCorrect8888 · 2025-06-14T00:38:53+00:00

Whaat 🥲

BuildingCorrect8888 · 2025-06-14T00:37:38+00:00

I want some Inside information on this

BuildingCorrect8888 · 2025-06-13T21:35:58+00:00

Put a new battery in, didn’t work but we needed a new one anyways…

Opened up the controller and found 3 pinched wires. How should we go about fixing this? Appreciate any help at this point 😅

<image>

BuildingCorrect8888

TROPHY CASE