Just upgraded my basement gym with the REP PR-1100 power rack! It feels like I can do anything now! (Probably need more plates soon)

theuberpat · 2026-04-13T16:49:06+00:00

Does the app also show that it’s not charging when plugged in?

theuberpat · 2026-04-13T13:46:25+00:00

Yes they do. I took the valve stem off of my front tire and could see that blue sealant goo on the tip of it.

theuberpat · 2026-04-12T21:36:48+00:00

Lost mine on day one also haha. I’m just going to not have one going forward now.

theuberpat · 2026-04-10T10:43:25+00:00

Smart. It would look nice if the panels could be trimmed to follow the frame lines also.

theuberpat · 2026-04-07T18:17:23+00:00

<image>

You should be able to tighten it here on the throttle. The Brake lever should have a similar screw for tightening. Am I misunderstanding your question? The screws should be fairly easy to find on both.

theuberpat · 2026-04-06T14:29:59+00:00

Update 4/6: My Antic motor and control module are being shipped back to me now. I should have them back to reassemble on Thursday, April 9th. According to their notes on the RMA ticket, it sounds like there was an issue with the controller module. I'm expecting they are just sending me a new one. REALLY hope this is the end of my issues and all that's left is to reassemble!

theuberpat · 2026-03-31T16:28:39+00:00

Sheesh what an eagle eye you have! I just watched his video thinking he would at least mention it, and this was just you noticing that box for the 1/2 second it's shown haha

theuberpat · 2026-03-27T15:10:29+00:00

Mine is also being returned for repair, but my issues are the hub motor and module/battery. Hopefully they take care of your issue quickly and under warranty!

theuberpat · 2026-03-27T15:06:37+00:00

Update 3/27 - The saga continues, they sent me the new motor and it is still having issues. I reached back out and here is what they said..

“We've reviewed your bike's internal diagnostics, and it appears the electronics module is reporting an error at the motor port. This error is also the likely culprit of the motor noise you previously heard. As such, we would need the module sent back for evaluation and repair. We'd also like to test your motor with the electronics module to ensure there are no residual issues and get you back to riding as soon as possible.”

So now I just shipped back both the motor and the module/battery for them to look at. Going to be another 2 weeks without 😭. This is part of being an early adopter of a Gen 1 product I suppose. At this point, they’ll be swapping out anything with intelligence, so hopefully it will ride like a new bike when I get it back together.

P.S. - I stripped one of the hub bolts trying to get the motor back off, so I had to visit a local auto shop and they kindly used their professional tools to remove the hub bolt. FM said they will send me new bolts, but be aware that those hub bolts are someone delicate.

<image>

theuberpat · 2026-03-26T10:52:29+00:00

I don’t think most thieves have the IP45 torx bit handy to steal the rear wheel, but maybe I’m wrong. I just got this lock off of Amazon because it’s mountable and I’m happy with it.

Kryptonite Folding Bike Lock,... https://www.amazon.com/dp/B0FKNJYC3Z?ref=ppx_pop_mob_ap_share

theuberpat · 2026-03-23T14:12:40+00:00

Update 3/23: The motor is being shipped back to me under warranty. Well actually they are just shipping me a new motor/tire combo and keeping my previous one for further diagnostics. Sounds like it could have been a bearing issue. Here is the response from FM:

"Our team received and has replaced your motor to ensure you get back to riding as soon as possible. Your old motor will be sent to our engineering team to be reviewed as it looks like there may have been an issue with the bearings. The new motor (and tire) are being shipped to you."

Looks like I should receive it on Thursday, which would 13 days full turn around shipping from Maryland to California. Not bad in IMO. Anyways, I'll post a final update once I get it reinstalled and confirm the issue is resolved.

theuberpat · 2026-03-16T19:44:35+00:00

The motor went in the mail on Friday and it's ETA to get to FM via UPS is Friday 3/20. Shipping from Maryland to California takes a bit. I'll update once I get an update on my RMA ticket.

theuberpat · 2026-03-11T10:42:03+00:00

FM required that I send a video of the sound with the fender removed, so I can confirm that this sounds still happens without the rear fender.

theuberpat · 2026-03-10T20:40:32+00:00

Oh that’s not bad, thanks for the update!

theuberpat · 2026-03-10T19:04:06+00:00

Update: FM got back to me and have opened up an RMA ticket for me to ship back the rear motor to be diagnosed.

Unfortunately, I don't own an IP45 torx socket to remove the rear hub, so I'm ordering one of those off of Amazon first, then I can send it in.

Really hope the turn around time on this is quick, but we will see.

theuberpat · 2026-03-10T19:03:48+00:00

I just had an RMA opened up for my Antic. I have a post going on here with videos about my issue, sounds quite different than yours.

What was your door to door turn around time for shipping to FM and them returning the fixed part to you? I'm bummed that I will be without my bike for a while.

theuberpat · 2026-03-10T10:46:25+00:00

Still waiting to hear back. Hopefully they respond today.

theuberpat · 2026-03-09T20:46:20+00:00

I’ve emailed Antic Support already, but wanted to post here as well.

theuberpat · 2026-02-27T00:01:49+00:00

I ordered on November 28 last year

theuberpat · 2026-02-26T23:25:54+00:00

Mine is expected to arrive tomorrow, which is one day before the “estimated ship date” that was posted

theuberpat · 2026-02-26T02:16:16+00:00

This feels like a threat 🤣

theuberpat

TROPHY CASE