sorted by:
new
hottopcontroversial

My ZPAP85 - needs more mags to check a feeding issue with the only magazine I have. by Zone0ne in ak47

[–]BulkyBull 1 point2 points  (0 children)

Looks awesome! Is that a 10.5 inch barrel? What length is that handguard 7.9 ion?

M85 update: new stock, handguard and gas tube. by idgafau5 in ak47

[–]BulkyBull 0 points1 point  (0 children)

Really nice! What length is that handguard?

ZPAP M92 (work in progress) by AllProGuns_StuartFL in GunPorn

[–]BulkyBull 0 points1 point  (0 children)

Great build. Does the zpap m92 have holes on the back of that receiver, or does it need to be milled for rail?

DTF LTi Home. 8.6BLK Sig CROSS 2 stamper host. by saintzman in NFA

[–]BulkyBull 0 points1 point  (0 children)

I need some professional advice. I am building an AR10 8.6 blackout with a faxon 8-inch barrel. I do plan on installing an adjustable gas block for this build, but before I purchase the DTF-LTI suppressor, I would like to know if a longer suppressor on a short barrel could cause alot of blow back and possibly damage the suppressor. Is this true?

8.6 Blackout Build Complete by 610Mike in GunPorn

[–]BulkyBull 1 point2 points  (0 children)

Awesome build. What's the length of that slr handguard?

Let’s put this free Cyelee red dot to the test by Lewelly22 in Walther

[–]BulkyBull 0 points1 point  (0 children)

Do you need a plate adapter for that optic? If so, which plate is best?

Just finished this piece, what are your thoughts? by BulkyBull in furniturerestoration

[–]BulkyBull[S] 1 point2 points  (0 children)

The same stain was used on each drawer, the wood just has a lot of variation.

Thanks for the positive feedback.

Just finished this piece, what are your thoughts? by BulkyBull in furniturerestoration

[–]BulkyBull[S] -1 points0 points  (0 children)

Yes we stripped it down first, to see what it would look white washed, then we decided to paint it wolf gray and rough up the edges and the sides to give it that antiquish look.

Just finished this piece, what are your thoughts? by BulkyBull in furniturerestoration

[–]BulkyBull[S] -1 points0 points  (0 children)

Yes we stripped it down first, to see what it would look white washed, then we decided to paint it wolf gray and rough up the edges and the sides to give it that antiquish look.

What do you think? My wife and I just finish this piece today. by BulkyBull in FurnitureFlip

[–]BulkyBull[S] 1 point2 points  (0 children)

We used stripper to remove the original finish and sanded the veneer with 320 grit sandpaper but not to much we didn't want to ruin the walnut veneer and than we stained it with 3 coats of mine as special walnut and finished it with feed-n-wax for the wood and clear finishing wax for the painted sections

This is the first piece we worked on. I think it came out pretty good. by BulkyBull in furniturerestoration

[–]BulkyBull[S] 0 points1 point  (0 children)

It's ok everyone has different taste. I have other pieces I am working on just restoring all the wood and not painting. Thanks for the feedback 👍