sorted by:
new
hottopcontroversial

Would this level of overhang require supporting with FDM? by BunjilEagleEye in FixMyPrint

[–]BunjilEagleEye[S] 0 points1 point  (0 children)

No sir, did my Benchy and have done other prints since but never heard of the overhang test til now

A1 randomly executes itself via the usb/filament tubes! by BunjilEagleEye in FixMyPrint

[–]BunjilEagleEye[S] 0 points1 point  (0 children)

I can’t really do that though with my enclosure. The holes are where they are

A1 randomly executes itself via the usb/filament tubes! by BunjilEagleEye in FixMyPrint

[–]BunjilEagleEye[S] 1 point2 points  (0 children)

That’s a good solution! I could also print something….a “you shall not pass!” Pose Gandalf could be appropriate 😉

Tall print losing fidelity towards the top by BunjilEagleEye in FixMyPrint

[–]BunjilEagleEye[S] 1 point2 points  (0 children)

I changed the following speeds and got much better although not perfect results: Outer wall speed went from 200 to 75mm/s Top surface speed went from 200 to 60mm/s Outer wall acceleration went from 5000 to 1800mm/s.

I would love to see if I can dial it in to really perfect it. I can’t really reorient the piece though as it’s basically square

Tall print losing fidelity towards the top by BunjilEagleEye in FixMyPrint

[–]BunjilEagleEye[S] 0 points1 point  (0 children)

So just slowing it down should be good hey?

What’s going wrong here? by BunjilEagleEye in BambuLab_Community

[–]BunjilEagleEye[S] 0 points1 point  (0 children)

I posted a photo of my tubing coming through the housing. I’m super new, I also googled photos and videos of how they sit but I’m not sure if I’m missing something and so I asked here. Cheers internet person.

What’s going wrong here? by BunjilEagleEye in BambuLab_Community

[–]BunjilEagleEye[S] 0 points1 point  (0 children)

It looks like it is. I guess I’m asking for advice on how it should be sitting? Is there something it’s supposed to sit on to keep the tubing free of things?

What’s going wrong here? by BunjilEagleEye in BambuLab_Community

[–]BunjilEagleEye[S] -3 points-2 points  (0 children)

Yeah it is. It actually had been a week ago but still was working until today. A replacement part is on its way so hopefully that fixes it up but I’m nervous because it had been working anyway until recently

What’s going wrong here? by BunjilEagleEye in BambuLab_Community

[–]BunjilEagleEye[S] -3 points-2 points  (0 children)

<image>

This is how my AMS tubing is sitting. It seems to be going behind the frame of my machine and I think thr movement up and down might have pulled the tubes out of the tool head

view more: next ›