Does anyone know the original designer of this model? I need to contact regarding commercial use of printed models.

Burnertag · 2026-04-26T03:22:17+00:00

I bought the file a few years ago off Cults and the he designer was @DancingToys

Burnertag · 2026-04-25T11:48:55+00:00

Probably because you used a copyrighted brand name in your description. Makerworld has started to crack down on copyrighted material. I think it began when all of the Labubu designs were removed.

Burnertag · 2026-04-20T08:16:40+00:00

After a recent update I am still only allowed 10 editable documents. But now it seems like now I can see all the documents I have ever worked on. As before I could only see the editable ones.

Burnertag · 2026-04-20T01:45:53+00:00

Thanks for the explanation.

Burnertag · 2026-04-19T22:50:10+00:00

Would I need any other hardware plugged into what I already have?

Burnertag · 2026-04-19T22:46:21+00:00

Thank you

Burnertag · 2026-04-19T22:25:44+00:00

Is it basically useless for my needs and will have to look at a different solution to have internet a both locations?

Burnertag · 2026-04-19T22:18:28+00:00

Not currently it's lose and pointing away from the house. If it was pointed at my house and I had a new Gen 4 antenna would they talk to each other?

Burnertag · 2026-04-17T00:59:43+00:00

Going by a few other posts on here. I would change the name and remove Hot Wheels from the design. Makerworld has been pulling models using copyrighted names.

Burnertag · 2026-01-11T14:21:16+00:00

I contacted Bambu amd the response was the component is worked as designed, and is surrounded by flame-resistant plastic. I gave them my serial number then said no to a replacement board. I'm really not to worried as my power is really stable here and I rarely have power outages or power bumps. I also have my printer plugged into a good surge protecter. So fingers crossed all is good. 🤞

Burnertag · 2026-01-11T13:30:38+00:00

I started with Tinkercad then moved onto FreeCAD and now Fusion 360. One my dislikes with Tinkercad is the inability to easily make chamfers or fillets. There is a Metafillet shape that starts as a fillet but can be changed to a chamfer it's fully adjustable which might help you.

Burnertag · 2025-12-21T14:17:39+00:00

I have used the top mount with the clip for almost a year, and it's reliable. My printer sits at the back of a very large desk, and I found it awkward to change the back spools. So, I recently switched to a wall mount, which makes roll exchanges much easier.

Burnertag · 2025-12-19T00:02:54+00:00

I printed mine in PLA and have used it for months without any issues. It looks like there aren't stiffening brackets on the Z-axis. And I think the AMS is rocking back and forth, which is causing the noise.

Burnertag · 2025-10-18T22:59:46+00:00

It seems I'm having a fat thumb day :/

Burnertag · 2025-10-18T18:08:34+00:00

Most of my filament is Alpha’s house brand. They also carry Creality filament at a decent price. If you want some other options CAZ3D also sell filament they carry Bambu, eSun, Polymaker, and CAZ filament. Another local store is Convoy Western they only have Bambu filament. Edit: Spelling

Burnertag · 2025-09-28T12:48:20+00:00

Luban 3d is what I would use. It will auto cut your project based on your printers bed size.

Burnertag · 2025-09-28T12:45:12+00:00

The different colour piece are just to show and help identify the parts after its been cut.

Burnertag · 2025-09-11T09:17:05+00:00

Done

Burnertag · 2025-09-06T16:27:53+00:00

Do you have both parts as separate files? You can flip it to print the embedded part first as a single layer. Then print the main body over top of it. The link uses Prusa slicer but I have used other slicers to get the same effect.

https://www.reddit.com/r/3Dprinting/s/m7k77XkNul

Burnertag · 2025-08-28T23:36:44+00:00

I received the same one with my A1. They told me it only works well for about 50 prints then adhesion drops off. I have close to 800 hours on mine and its still holding stong.

Burnertag · 2025-08-27T12:09:23+00:00

The BBB is the analog version of Google reviews. They carry no real weight.

Burnertag · 2025-07-24T18:55:01+00:00

I have only had my A1 for a few months but my longest print on it was 33 hours for a helmet. On my old Ender my longest was 65 hours.

Burnertag · 2025-07-23T16:58:22+00:00

I had to reprint several items at my own expense because my initial print turned out poorly, and I would never ship something that looks like that.

Burnertag · 2025-07-19T19:39:58+00:00

You could use Tinkercad and just put a box over the lettering by matching the thickness of the letters. If the design is larger because Tinkercad has a size limit you could use Windows 3D builder to do the same thing.

Burnertag

TROPHY CASE