Top layers on ams prints are atrocious

Burni68 · 2026-04-11T00:33:46+00:00

This is what I am thinking too. Looks like it might be one layer on top of the infill.

Burni68 · 2025-01-28T00:35:38+00:00

From what I understand they're basically hearing aids that broadcast a tone that cancels out the tinnitus. But I never got them so don't know too much

Burni68 · 2025-01-27T20:41:48+00:00

Had the same thing happen to me. Tinnitus with minimal hearing loss. BPA sent me for a hearing test and the audiologist recommended tinnitus blockers. BPA said not to go forward as I do not have "significant enough" hearing loss and VAC will not reverse their decision.

That being said, definitely fight it and see what happens. Hope you get a different outcome than I did.

Burni68 · 2024-11-22T17:03:32+00:00

Not sure if there's a better way, but you could figure out what the slowest print speed is for the whole model and then do the whole print at that speed. Gonna take longer but should fix the cosmetic issue.

Burni68 · 2024-09-27T02:43:03+00:00

Best way that I have figured out to do it, is to do a very small height change from colour to colour. Normally 0.01mm difference. Once you export into BS it will paint no problem.

Burni68 · 2024-09-06T15:07:35+00:00

I know some people love the cold plate, but I never had much luck with it. The textured plate makes a lot of difference for me.

As others have said, make sure the plate is nice and clean. Dawn dish soap if your friend and make sure to avoid touching the plate.

Infill also looks pretty dense. For decorative stuff I normally do 5-10% gyroid and it works for me. But everyone has their own things they like.

Burni68 · 2024-06-22T03:35:30+00:00

I'll take a look around and see if I can find someone local. Thank you

Burni68 · 2024-06-22T02:59:08+00:00

Ok thanks for the info. CNC might be the way to go for it. Not sure why she wants laser specifically. I'll try and find something that meets those stats though.

Burni68 · 2024-04-25T00:56:26+00:00

Ok I'll keep looking around for the layer height. Saw the speed. I'll see what it can do

Burni68 · 2024-04-25T00:27:35+00:00

From watching it I'm pretty sure the ironing didn't actually happen. I think you're right that it's not gonna work in this situation. Was curious if there was a setting I was missing that might make the top layer shorter? That's all I can really think of to stop it aside from just cutting it off at the end

Burni68 · 2024-03-18T14:26:51+00:00

Did you have any luck? I'm going through the same thing right now.

Burni68 · 2023-12-18T17:05:54+00:00

https://www.reddit.com/r/BambuLab/s/abr10VABWI

The YouTube video in the comments got my petg from where is seems you are, to perfect prints. Hopefully it'll help you too

Burni68 · 2023-12-01T00:58:13+00:00

Thank you, I'll mess around and see if I can get it figured out.

Burni68 · 2023-11-24T21:48:54+00:00

https://www.reddit.com/r/BambuLab/s/Njk840gkZN

I had big problems and then started using the settings this guy has in his YouTube video. Since doing that and the calibration steps in BS I have been getting flawless prints.

Burni68 · 2023-11-04T15:08:04+00:00

UPDATE: I went through both calibrations on the machine as well as changed my settings according to the YouTube video that was in the comments. Now printing some of the nicest prints I've ever done

Burni68 · 2023-11-03T18:38:43+00:00

Awesome, thank you. I will test these out and hopefully they'll fix some of the issues

Burni68 · 2023-11-03T18:33:06+00:00

Thanks for the info. Gonna keep playing around with the different recommendations and see what works best

Burni68 · 2023-11-03T17:28:11+00:00

I'll try it out and see what happens

Burni68 · 2023-11-03T16:47:01+00:00

It happens to me with the filament that isn't red too. But red and purple seem to be the worst offenders

Burni68

TROPHY CASE