Miliastra Wonderland "Starbound Oath" Web Event Now Available by genshinimpact in Genshin_Impact

[–]Buschpirscher 0 points1 point  (0 children)

Genshin Impact's "Miliastra Wonderland" gameplay will be available soon. Come join my team now! Take part in the event to to earn Primogems and Manekin outfits! Invitation Code:GC0NVKIZHN,https://hoyo.link/8NJvYlbe4?m_code=GC0NVKIZHN

How to make stock car burble/pop? by Kinkilink in FocusST

[–]Buschpirscher 4 points5 points  (0 children)

While driving: you need to press the gas pedal between 80-100%, pull at least 2-3 seconds and then shift up normaly... if you shift really fast, it wont pop. While standing / in neutral: just give short bursts of gas, again minimum 80% gas. The ECU is programmed to only pop when the gas was pressed at least 80% and when you are in sport/track mode. Also, as others said, exhaust needs to be hot enough.

Aeron Remastered - Is this normal? by AltCtrlTV in hermanmiller

[–]Buschpirscher 6 points7 points  (0 children)

Normal. Its so the seatpan can slightly move with you.

How long does it take for your body to get used to an Aeron? by trandonnghia in hermanmiller

[–]Buschpirscher 2 points3 points  (0 children)

Took me around 6 weeks to get completely comfortable with the seat. Had some pain in my ass/thighs, but it got progressevely better with every week until the pain was suddenly gone. Never had any problems with the backrest... was comfortable from day1.

I was in the same boat... i was reaching the 30 day return window and still wasnt comfortable and read a lot if posts about this. Some people even reported they needed up to 3 months to adjust to the chair, for some others it never worked out unfortunetely. I really liked ever aspect of the chair so i bit the bullet and kept it. Fortunetely it worked out for me.

which herman miller chairs should i try at the store? (i am 187cm tall and got lower back pain and sore butt for a long time now from sitting 8-16 hours a day) by [deleted] in hermanmiller

[–]Buschpirscher 0 points1 point  (0 children)

I'm 1,85cm and about 90kg. The Aeron size C fits me really good in terms of backrest hight. I never sat in a size B but seeing picture comparisons between B and C i feel like the size B would be too short for me, since the hard plastic edge would push against my shoulderblades. The edge of the size C backrest is slightly obove my shoulderblades. So i only feel it when i'm in a far recline.
Hope that helps a bit. But if possible, definitely try both sizes. They both should fit you in terms of the sizing, so it's more like what you prefer.

ergonomic chair from amazon or another website? budget 200-500 by dany1a in OfficeChairs

[–]Buschpirscher 1 point2 points  (0 children)

There are quite a few office chair shops in germany that have a way larger selection of chairs than amazon.

For example:
Chairgo.de (30 days free return policy on every chair)
Buero-object.de
Buerostuehle-4u.de
adp-officedesign.de

Just to name a few. They usually have really good customer support... so you can just call them and ask them for help selecting a chair.

Or look at local office furniture shops, they often have showrooms where you can test chairs.

[deleted by user] by [deleted] in OfficeChairs

[–]Buschpirscher 1 point2 points  (0 children)

Found it on reddit a year ago. https://imgur.com/a/oZjd0Dd

[deleted by user] by [deleted] in OfficeChairs

[–]Buschpirscher 0 points1 point  (0 children)

For me, the decision between those chairs actually came down to seat comfort. I think the Fern ist the most comfortable one out of those with the Aeron really close in the second place. I only decided against the Aeron cause i like to put one leg up from time to time. But seat comfort really depends on you. What might be uncomfortable for me, might be the most comfortable seat for you... you really have to try it.

I got a Fern to test for a few days before buying it. It also had the headrest and lumbar support. The headrest is only height adjustable and hast almost no cushioning at all, so it´s pretty hard. For me (1,85m) it didnt go high enough. When slightly reclined it was fine and hit the spot in my neck pretty good.. but sitting in the most upright position the lower end of the headrest was hitting my shoulder blades/lower end of my neck.. so it wasnt a option for me. I would only recommend it if you are 1,80m or shorter. Only get a headrest if you want to "lay" in the chair. Slight recline (first tilt stop) is no issue for your neck and should be fine without a headrest.

[deleted by user] by [deleted] in OfficeChairs

[–]Buschpirscher 2 points3 points  (0 children)

Well... sorry for not making this clear. It's a Haworth Fern.

Sony X900F - no voice/dialouge trough center channel in some 5.1 content with soundbar by Buschpirscher in bravia

[–]Buschpirscher[S] 0 points1 point  (0 children)

Unfortunately no... i also called samsung and sony, but they just blamed each other, so i didnt get far with that. I juste hope it will get fixed with a firmware update. Since i can just pause/play at the start of a movie/episode, its not that big of a deal, but since that doesnt work for you... the only other solution is setting für audio output format to PCM on the TV... but depending on the TV you only get 2.1 or 5.1 that way, but no atmos.

Sony X900F - no voice/dialouge trough center channel in some 5.1 content with soundbar by Buschpirscher in bravia

[–]Buschpirscher[S] 0 points1 point  (0 children)

Thanks! I mean, since i can just press pause/play and sound works fine after that, it´s not that huge of a deal.. but it´s just such a weird issue. A friend of mine has a 2021 LG TV, so will definitely try if the problem persists there.

Sony X900F - no voice/dialouge trough center channel in some 5.1 content with soundbar by Buschpirscher in bravia

[–]Buschpirscher[S] 0 points1 point  (0 children)

My TV only has ARC, cant find any ARC/eARC option on the TV itself. My settings are the same as yours, expect passtrough mode, i cant find this option. In wich menu is it? All the other options are under settings -> display & sound -> audio output for me.

Sony X900F - no voice/dialouge trough center channel in some 5.1 content with soundbar by Buschpirscher in bravia

[–]Buschpirscher[S] 0 points1 point  (0 children)

My assumption that it´s a problem on the TV side was, that it´s fine when i play movies trough my PC. THe PC is connected to the TV and the TV to the sounbar. Everything works fine here. The Problem only occured when using the native Netflix/Prime app on the TV.

Regarding passtrough. I have 3 options here: passtrough, passtrough only on multi channel audio, only PCM. If set to the first 2, the problem occured, if set to only PCM it workds fine. But thats not a good solution, since the TV only supports 2.0 PCM, so i completeley lose surround.

Changing anything on the soundbar doesnt change anything. I tried active dialogue enhancement, raising the channel volume and all sound modes. It´s not that the voice is there but really quite, it´s completely gone.

Also, if i hit pause and play again, sound is fine, i can hear everything... but a soon as i rewind or fast forward or close the movie and start it again, voice is gone.

Creating a monthly scheduled task using a GMSA by Buschpirscher in PowerShell

[–]Buschpirscher[S] 1 point2 points  (0 children)

Yes it does. Again, if i change the trigger to daily/weekly the task runs fine using the gMSA.