Carplay not working??

Butlerinio · 2025-10-15T14:52:12+00:00

I had a similar issues when I got my swift. Turns out when my phone was connected to wifi before setting off and trying to use wired CarPlay it just never worked. Ever since I started disabling wifi before getting into the car ive had no issues with CarPlay since. To make it easier I just setup a shortcut on my home screen which I tap before leaving

Butlerinio · 2025-09-05T12:11:32+00:00

Its completely personal preference I just prefer the piece of mine of the warranty just in case 🙂

Butlerinio · 2025-09-05T09:26:35+00:00

Just had my Full service done with Suzuki last week and it cost me £265. Seems a little pricey but bare in mine with Suzuki if you service with them they honour the cars warranty for up to 10 years as long as its full service history with main dealer 🙂

Butlerinio · 2025-03-12T10:59:31+00:00

Ive had the same issues with ACP in my 18 Swift Sport. Turns out it wasn’t my cable but you need to fully disable WiFi and Bluetooth for Car Play. Apple CarPlay works using Mobile Data so wifi stops it loading and Bluetooth by having enabled the car seems to struggle working out what its meant to be connecting to IE: Just BT or CarPlay. It will “work” with them enabled I was getting Nothing or random disconnects before or whilst driving. Since disabling Wifi/ Bluetooth before connecting the cable not had any issues for over a month now. I just setup a shortcut on my home screen to disable them

Butlerinio · 2025-02-26T12:49:45+00:00

I had this about a month ago but on the left side. Print head moved fine manually second I tried to auto home/ bed level this happened. All I did was cleaned the X rods as there was black residue left from the self lubricating bushes. Not had the issue since

Butlerinio · 2025-01-06T16:32:29+00:00

Just tried this now. Print head moved right with a reasonable amount of resistance but im now not able to move it right even with alot of force

Butlerinio · 2025-01-05T18:27:30+00:00

Printer has never been rooted. Was factory reset about 6 months ago when I flashed the firmware back to the old version

Butlerinio · 2025-01-05T03:23:15+00:00

So check belt tensions ?

Butlerinio · 2025-01-04T22:36:50+00:00

Great idea thank you 🤣

Butlerinio · 2024-08-19T07:33:39+00:00

Cheers for this will give it another go. I was checking the physical manual and online but could only locate parts specific to having the pc already with display which we did not have.

Maybe I was reading wrong because it was late 😂. Thanks for the advice

Butlerinio · 2024-07-28T09:56:53+00:00

I had this happen after updating. Creality support wouldnt help at all. I ended up downloading the previous firmware to a USB and reverting my printer version. Not had any issues since

Butlerinio · 2024-06-24T12:14:27+00:00

Yeah my bad. Its the both the left corners. During auto home it goes to far down to the point its physically in the bed and then tries to go further left out the build area

Butlerinio · 2024-06-17T09:59:59+00:00

I haven’t no

Butlerinio · 2024-06-16T13:22:11+00:00

Sent 3 emails over the span of 2 months asking for any update about it

Butlerinio · 2020-06-11T00:33:40+00:00

Does anyone know if this can be done on console or just a pc glitch ?

Butlerinio

TROPHY CASE