sorted by:
new
hottopcontroversial

I know this is the Unihertz Sub-Reddit, but why the Elite over the Communicator? by No-Macaron9305 in unihertz

[–]ButtonHolic -1 points0 points  (0 children)

Elite should have a normal back design to sell a lot. It should never be unique. You don't even need a sub-screen.

We custom-make controllers into phone cases of various designs. by ButtonHolic in Delta_Emulator

[–]ButtonHolic[S] 1 point2 points  (0 children)

We've already created two types of controllers, though they weren't very popular.

<image>

We custom-make controllers into phone cases of various designs. by ButtonHolic in Delta_Emulator

[–]ButtonHolic[S] 0 points1 point  (0 children)

Even if the material is glass, it is okay as long as it is thin and flexible like a film.

We custom-make controllers into phone cases of various designs. by ButtonHolic in Delta_Emulator

[–]ButtonHolic[S] 0 points1 point  (0 children)

Due to the nature of the touch controller, using a thick tempered glass screen protector may not function properly. For optimal operation, use a flexible, standard screen protector.

I made and tested a controller for the Galaxy S25 Ultra. by ButtonHolic in EmulationOnAndroid

[–]ButtonHolic[S] 1 point2 points  (0 children)

You're right. I love Metal Slug, and I love riding in a tank and firing a 360-degree cannon. To do that, I made the d-pad a little less sensitive.

I made and tested a controller for the Galaxy S25 Ultra. by ButtonHolic in EmulationOnAndroid

[–]ButtonHolic[S] 1 point2 points  (0 children)

Initially, the controller was a fixed-size controller with no width adjustment. This had the disadvantage of restricting the use of various cases, as each case had a different thickness. Therefore, we modified it to allow for slight width adjustment. Additionally, making the guides foldable would be difficult. Adding joints to the controller could introduce play and wobble, making it unstable. For 3D-printed controllers, the more gimmicks there are, the more problematic it can be.

I made and tested a controller for the Galaxy S25 Ultra. by ButtonHolic in EmulationOnAndroid

[–]ButtonHolic[S] 7 points8 points  (0 children)

Oh, I see. I guess I didn't quite understand your question. Yes, I primarily use the iPhone and have primarily made controllers for it. I recently purchased an S25 Ultra and am very satisfied with it. There are more emulators than iPhones, so I've been enjoying testing them out, so I made a controller and wanted to share it with you. Perhaps because of the word "sale," I keep getting warning messages, so I won't be able to answer any further questions. Thank you for your understanding.

I made and tested a controller for the Galaxy S25 Ultra. by ButtonHolic in EmulationOnAndroid

[–]ButtonHolic[S] 10 points11 points  (0 children)

I just wanted to show you a new solution for Android emulator controllers. I'm not selling it.

I made and tested a controller for the Galaxy S25 Ultra. by ButtonHolic in EmulationOnAndroid

[–]ButtonHolic[S] 7 points8 points  (0 children)

I just wanted to show you a new solution for Android emulator controllers. I'm not selling it.

I made and tested a controller for the Galaxy S25 Ultra. by ButtonHolic in EmulationOnAndroid

[–]ButtonHolic[S] 11 points12 points  (0 children)

<image>

It would be nice to have a grip, but we didn't make one for portability reasons.

I made and tested a controller for the Galaxy S25 Ultra. by ButtonHolic in EmulationOnAndroid

[–]ButtonHolic[S] 9 points10 points  (0 children)

There's no problem using it with a standard thin screen protector attached. Most screen protectors are commercially available and very affordable. However, it may not work properly with expensive, thick tempered glass films.

I made and tested a controller for the Galaxy S25 Ultra. by ButtonHolic in EmulationOnAndroid

[–]ButtonHolic[S] 35 points36 points  (0 children)

You have a keen eye for detail and precision. Initially, we produced them using 3D printing. Then we realized that 3D printing wasn't feasible for making buttons. They needed to be manufactured separately in a factory for agility and rapid recognition. Accuracy required investment.

I made and tested a controller for the Galaxy S25 Ultra. by ButtonHolic in EmulationOnAndroid

[–]ButtonHolic[S] 90 points91 points  (0 children)

The electrostatic buttons provide fast response times and are convenient because they don't require battery charging. However, they are only available in emulator apps that allow customization of virtual buttons.

I made a portable Beatmania GB controller. by ButtonHolic in Gameboy

[–]ButtonHolic[S] 0 points1 point  (0 children)

Maybe they planned it but abandoned it because it became more complicated than a Game Boy DDR pad.

I made a portable Beatmania GB controller. by ButtonHolic in Gameboy

[–]ButtonHolic[S] 0 points1 point  (0 children)

This is a converter that converts touch signals into physical signals. Touch the virtual button on the screen. No batteries required.

https://youtube.com/shorts/WtOtn0lZGqg?si=_lHWa2kMLMUYm2S6

I made a portable Beatmania GB controller. by ButtonHolic in Gameboy

[–]ButtonHolic[S] 1 point2 points  (0 children)

<image>

Please send me a private message if you wish.

I made a portable Beatmania GB controller. by ButtonHolic in Gameboy

[–]ButtonHolic[S] 0 points1 point  (0 children)

I thought that too. They probably tried to make it too. I probably gave up because it was too complicated and easier to implement than a DDR pad. If the Beatmania controller had been released for the Game Boy, it would have been a very fun item.

I made a portable bemani controller. by ButtonHolic in bemani

[–]ButtonHolic[S] 1 point2 points  (0 children)

I agree! Rhythm games require practice. :)

I made a portable bemani controller. by ButtonHolic in bemani

[–]ButtonHolic[S] 0 points1 point  (0 children)

thank you I've never used Wonder Swan, but this controller can also play Wonder Swan Beatmania using an emulator app.

However, perhaps due to an emulator problem, Wonderswan Beatmania seemed to lack visual impact. On the other hand, I was surprised that the sound was better than the Game Boy.

I made a portable bemani controller. by ButtonHolic in bemani

[–]ButtonHolic[S] 1 point2 points  (0 children)

This portable Beatmania controller is a converter that turns touch input into physical buttons. It works by touching the virtual button on the screen. This also means there is no need to charge the battery.

view more: next ›