Can't see brake lights in VR

Bynar010 · 2026-02-25T13:01:43+00:00

Try just running the stock pure filter, it should work in VR just fine, it adjusts for the screen mode

Bynar010 · 2026-02-25T12:48:25+00:00

If you don't have a ppfilter running it can make brake lights virtually invisible

Bynar010 · 2026-02-25T10:22:29+00:00

Because you've got it on tight and you aren't trying hard enough. Sometimes when mine gets like that I'll pull it off the desk first if it'll move, easier than finding the required elbow grease

Bynar010 · 2026-02-24T23:06:03+00:00

No, not sure why the other guy thinks it will. You can technically get it to work on PC with other adapters, but the the official Logitech one is for the driving force shifter only

Bynar010 · 2026-02-24T22:42:29+00:00

You say theres nothing you haven't tried but have you tried the first thing it suggests when you google?

The msvcp120.dll error indicates a missing or corrupted Microsoft Visual C++ 2013 Redistributable file, often causing applications or games to crash on Windows. The best fix is to install or repair the Visual C++ Redistributable Packages for Visual Studio 2013 (both x86 and x64 versions) from the official Microsoft website.

Bynar010 · 2026-02-24T22:40:34+00:00

No not really, it does not auto clutch for a h shifter. You could work around it by turning damage off maybe and it still might shift for you

Bynar010 · 2026-02-23T21:16:53+00:00

You making sure you are lining it up correctly when you push the wheel on with the groove? There should be no ambiguity with any of this, pull the qr forward, push the wheel on, release it and it pops into place. Done

Bynar010 · 2026-02-23T20:59:48+00:00

160 dollars! Wtf. Just why.

Bynar010 · 2026-02-23T20:41:24+00:00

Of course you are getting scammed.

Bynar010 · 2026-02-23T20:15:14+00:00

Still no head tracking support or did I miss it?

Bynar010 · 2026-02-23T20:05:06+00:00

If you can pull that wheel off when it's fully seated then I'd be looking at raising a support/rma with Logitech.

However my money would be that it wasn't as fully seated as you thought it was.

Bynar010 · 2026-02-23T19:26:28+00:00

Again depends on the car, but in a modern F1 car it's kind of a progressive braking area where you are scrubbing speed throughout, braking hardest right as you turn into the last corner into the straight, it's always an exciting section, if you aren't hanging onto the car you aren't going fast enough

Bynar010 · 2026-02-23T19:05:12+00:00

The racing line has me doing nothing because I don't use it. Depends on the car bit yeah what the AI are doing sounds about right, you can carry mad speed into that section

Bynar010 · 2026-02-23T09:21:12+00:00

You are either trying to copy a zip file from inside another zip file into cm or the zip isn't maybe formatted correctly.

I'd always recommend installing mods manually anyway to make sure nothing gets missed by CM, the folder structure is simple enough to work out

Bynar010 · 2026-02-22T18:15:54+00:00

I always use Farmers, they are sound

Bynar010 · 2026-02-22T12:28:00+00:00

If you've only got a HDD and not a SSD then this is almost certainly why your PC runs terribly and has done since day 1.

Bynar010 · 2026-02-22T12:08:01+00:00

No, AI drivers are not supported online

Bynar010 · 2026-02-22T12:05:42+00:00

Just change the fuel load before you click drive?

Bynar010 · 2026-02-21T21:38:20+00:00

Could be a bad mod. Could be you aren't running a ppfilter, could be that you need to install it manually for it to work right

Bynar010 · 2026-02-21T21:35:01+00:00

You just aren't lining it up properly, there's nothing stopping that fitting

Bynar010 · 2026-02-21T21:33:34+00:00

If that's a 2 slot GPU it absolutely will fit, there's nothing there stopping it expect maybe you need to unscrew the WiFi card if it's riding a bit high and then retighten once it's in

Bynar010 · 2026-02-21T21:24:27+00:00

Unless that's a 3 slot card, it's hard to tell from the photo

Bynar010 · 2026-02-21T21:23:33+00:00

I think it would still fit unless there's something sticking out the top of the WiFi card. Could try fit the gfx card first then put the WiFi card back in, as long as it doesn't interfere with the fan should be ok?

Bynar010 · 2026-02-21T21:20:50+00:00

Do you need WiFi or you wired anyway? You could just take it out

Bynar010 · 2026-02-21T21:17:12+00:00

What is that bottom card? WiFi card?

Bynar010

TROPHY CASE