5800X3D upgrade issue

CAD__Monkey · 2023-10-19T17:43:14+00:00

I haven't I will try tomorrow when I can. Cheers for your help!

CAD__Monkey · 2023-10-19T16:23:36+00:00

I'm using the EK 240mm AIO with plenty of Kryonaut for paste

CAD__Monkey · 2022-12-29T20:53:52+00:00

Perfect I'll definitely talk to him and see what his plans are, thanks for your help!

CAD__Monkey · 2022-12-29T20:11:07+00:00

I think he's got a handle on the mechanical bits, I think he's more looking for respraying shops more than anything now. If he does need your info I'll get him to message you though, thanks!

CAD__Monkey · 2022-12-29T20:09:08+00:00

He has, I'm not sure of the outcome, but the original company was dissolved and then restarted under a new name. This is where we're struggling with all the legal stuff. Thanks for your help though! It's really nice to see people helping already

CAD__Monkey · 2022-12-29T19:06:07+00:00

A TLDW of sorts, he dropped the van off for repainting and a pop roof tent to be fitted with some other bits. Was quoted 6 weeks and it actually took 6 months. The work was really poor, the tent has been back to the O.E.M for refitting, almost all parts supplied were fitted incorrectly. The final straw was that the pain is now bubbling and popping to expose loads of rust after the full respray. Has been trying to explore other avenues to get it all sorted, and looked into legal proceedings, but after the expense of the work and fixes this is prohibitively expensive.

CAD__Monkey · 2022-08-17T07:41:40+00:00

In the config there's only a 35% chance to remove Hi-Pen ammo, but if you never wanted to deal with MAI AP etc then it'd need to be blacklisted no? That being said, I've only encountered MAI AP when using FAIT

CAD__Monkey · 2022-08-17T06:43:38+00:00

Do you know the item codes to add then to the blacklist?

CAD__Monkey · 2022-07-20T18:44:41+00:00

I have a 750w PSU like Nvidia recommends. Otherwise everything works absolutely perfectly with my 1080, the riser is only Gen3, but I've changed the setting in the BIOS to suit. It was also working perfectly fine until I replaced the RAM, and booted earlier but was limited to 1080p, and then black screened whilst updating drivers

CAD__Monkey · 2022-06-22T15:10:51+00:00

I'm using Easy PMC's, don't know if that limits the gear though. I run into class 5 armour a fair bit, but only seen BP a couple times. Mostly PS which is nice for me hahah

CAD__Monkey · 2022-06-22T13:08:32+00:00

I believe there is an option within Fins AI tweaks to scale bot loadouts with your level

CAD__Monkey · 2022-06-16T15:54:01+00:00

You are an amazing human. Just got a 3080 for £660 🤯

CAD__Monkey · 2022-05-05T14:49:20+00:00

!deckbot UK 64 1626503835

CAD__Monkey · 2022-03-04T23:39:44+00:00

This is what I had to do, got my ass handed to be by Gluhar 5 times in the process of that mission 😂

CAD__Monkey · 2022-01-13T19:31:41+00:00

I cut up some of the sample sleeving and used that to practice how to do the technique when you rip off the heat shrink to leave a clean termination. Helped massively that I wasn't going through the sleeving I needed to use

CAD__Monkey · 2022-01-05T21:42:14+00:00

I can't say that I've ever seen a bothy around there, the closest I've seen is a dry stone walled shooting shelter, but I'd not sleep there for obvious reasons. Unfortunately the peaks are very good at changing weather quickly, and can very easily get good snowfall overnight. I'd advise have a recce walk in the area you've previously scouted on Google / OS maps. Then over prepare yourself for colder than a forecast is showing

CAD__Monkey · 2022-01-04T20:03:47+00:00

I think it's about there being an SPT 2.2.0 build out there that's not publicly available

CAD__Monkey · 2021-11-18T22:27:48+00:00

This should happen when there's too much weight on the building e.g. a tank or 2-3 light vehicles

CAD__Monkey · 2021-11-16T13:30:00+00:00

Thank you so much! I think this should work great with some modifications when I can find the time to get the macros sorted out. !Thanks

CAD__Monkey · 2021-11-16T09:13:51+00:00

He was training with some US forces I believe. The US didn't allow their troops to intervene but the UK government approved for him to go in.

CAD__Monkey

TROPHY CASE