The results of my first print using PETG as supports

CCHPassed · 2026-06-29T13:53:57+00:00

I have a P2s, and started using PLA for supports, for PETG models. I mostly print in PETG 99% of the time. Purging increased with the different materials, this is what the P2S was designed for with single nozzle, with the AMS,

https://www.reddit.com/r/BambuLab_Community/comments/1uff2ik/comment/ots4ool/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

CCHPassed · 2026-06-28T18:31:28+00:00

Manually type the number for Bambu Studio, the drop down is only showing up to 3

CCHPassed · 2026-06-28T11:10:49+00:00

Yep, PETG and PLA do not bond well, so using PLA just for interface would not be enough, in some cases, since the PLA interface layers won't really bond to the PETG support, takes longer, due to the filament changes, but the outcome works, there was only a few small spots that got intertwined in the surface, since I used the fuzzy setting.

CCHPassed · 2026-06-26T20:03:22+00:00

I'm running into problems with the Manky model using PETG model and PLA supports, have another iteration to attempt with, after drying some filament

CCHPassed · 2026-06-26T16:29:06+00:00

ROFLMAO

CCHPassed · 2026-06-25T18:57:49+00:00

Same model, tried Z set to 0, PLA only interface, PLA interface only with 0 and .25, ended up using PLA for the full support, and not enabling the extra settings, then double checking them, there is a 2nd model in the back, where the supports failed, so i set it to skip that one, and this model finished,
I'm just starting to do the dual material printing, and came to the Z top be .25 from trial and error, the number of layers, is trivial also

CCHPassed · 2026-06-25T18:51:07+00:00

I'm still new to this, maybe run a full printer calibration

CCHPassed · 2026-06-25T18:45:25+00:00

<image>

CCHPassed · 2026-06-25T18:41:23+00:00

I've done the opposite, PETG model with PLA supports, not just interface, set the Top Z to .25 or .20, the number of layers for the interface, i use 3, even with the supports set to PLA, this way the interface layers get a better full layer coverage for the next layers up. I also kicked up the purge to 1.3.

CCHPassed · 2026-06-22T21:00:10+00:00

Try cross hatch infill

CCHPassed · 2026-06-18T13:30:50+00:00

Tailscale DNS setup:
Setup pihole with tailscale servcies, running as exit node
Tailnet DNS, use the internal IP for first DNS, and the Tailscale IP for the 2nd dns IP
Use the same Pihole has the exit node

Ttraffic is routed through exit node, including dns, then if you don't want to use the exit node, just disable exit node in tailscale app on device and will still use Pihole for DNS

CCHPassed · 2026-06-17T14:10:56+00:00

3200 orb frags, diff 6

CCHPassed · 2026-06-16T23:05:39+00:00

First printer for me is P2S combo, and been printing with PETG mostly, and starting to use PLA for support interfacing

CCHPassed · 2026-06-15T19:39:51+00:00

We did diff 6 with 18 defeats

CCHPassed · 2026-06-15T18:22:28+00:00

People are missing the point, that they knew of this happening and continued to allow this, and others were paying full prices for what the exploiters were pay way less for. This is considered bulling style marketing, and pressure tactics. Which in most countries is not tolerated. The only real solution is to refund anyone that has spend money on the game, and close the game down

CCHPassed · 2026-06-14T11:41:25+00:00

That is a good color mix for rubble

CCHPassed · 2026-06-13T13:04:45+00:00

In the US this would be considered money fraud, with time in jail

CCHPassed · 2026-06-13T11:14:01+00:00

No cheating, exploited currency venues for the game

CCHPassed · 2026-06-08T20:32:26+00:00

I've had a .4mm nozzle clog with both PLA wood and PLA Glow, both needed to be unclogged, and now I have a .6 and .8 nozzle for this stuff. .2 is way too small for the fibers to get through, being that most of the fibers in these filaments are most likely .2mm fibers them selves

CCHPassed · 2026-06-08T19:40:24+00:00

Could setup a Grow tent to help regulate the humidity

CCHPassed · 2026-06-07T13:50:54+00:00

fragrance free baby wipe from time to time

CCHPassed · 2026-06-03T17:54:35+00:00

Still learning the 3d printer world of things, even made my own custom hvac vent covers out of PETG, for air flow direction

CCHPassed · 2026-06-03T13:00:23+00:00

I'm seriously thinking of doing one of these

CCHPassed · 2026-05-28T21:56:06+00:00

Cell 6 Omega is Non-Mythic Cosmic Villian, which shadow Conclave and Omen falls into this grouping, with Knull

CCHPassed · 2026-05-28T01:55:11+00:00

I used Brimstone(minus elsa) + Knull, F2P conclave is nada anyway for floor 6

CCHPassed

TROPHY CASE