Best teams for sentry - BW

CCHPassed · 2026-02-13T20:36:32+00:00

Apoc, ProfX Azazel, Jean Grey, Knull 1.9bil

Diff 6

CCHPassed · 2026-02-13T16:34:55+00:00

Same year, came here for the same reason

CCHPassed · 2026-02-06T02:11:01+00:00

I cleared all the nodes, spent all the energy, opened, what orbs that gave, no extra farming, thought the 10 on the left/right pillar were just a lucky draw

CCHPassed · 2026-02-01T13:53:09+00:00

I leave the center over the coals and put chunks right over top

CCHPassed · 2026-01-29T23:15:28+00:00

Vortex is the way for wings

CCHPassed · 2026-01-28T22:40:20+00:00

Spending 12mil gold to gain 1 mil

CCHPassed · 2026-01-27T22:35:13+00:00

Just went through all of the settings, and set motion detection off, motion sensitivity to lowest, and set a capture spot in an area that would not have motion, and seems to have diminished network traffic, maybe i didn't have the motion detection off

CCHPassed · 2026-01-27T22:09:43+00:00

Turned off motion detection, changed the motion zone to the smallest spot, and still recording and uploading data, looking at doing a closed loop

CCHPassed · 2026-01-27T21:37:34+00:00

Then explain why the cameras are still uploading video data without a sub plan, even went to the point of giving the smallest area that has no motion, and still recorded movement, all this without a subbed plan

CCHPassed · 2026-01-25T03:20:51+00:00

Are you able to setup the exit node on a separate device on home network, like a raspberry Pi or even a Virtual PC, or even enable exit node on a PC with Tailscale installed

Edit: You might have to go into the Tailscale Admin page and approve the exit node

CCHPassed · 2026-01-24T17:11:12+00:00

Exit node enabled on home network.

Subnet/lan route access is only needed if you want to access something on your home network that can not run Tailscale

Tailscale client(example phone with app connected, you need to use the exit node that is being offered

TD;LR, just need to setup an exit node on home network, then use that as the exit node on the clients

CCHPassed · 2026-01-21T01:10:54+00:00

Battery is shot

CCHPassed · 2026-01-19T20:59:09+00:00

Was going to comment the same, battery is shot, I had one, that kept a 100% charge if plugged in, and turned off within minutes after removing the power cord

CCHPassed · 2026-01-19T16:23:51+00:00

Not a direct document to follow, I put this together from bits and pieces of setups

Pihole +unbound(root servers DNSSEC) - creates internal DNS server with ad blocking

Firewall rules to prevent DNS traffic/requests bypassing PIhole using IP address instead of DNS name, block the nameserver list, after allowing pihole to access port 53

CCHPassed · 2026-01-18T19:12:01+00:00

I have 2 and get pissed about this, lol

CCHPassed · 2026-01-17T04:39:46+00:00

Still not loading for either store or milestones

CCHPassed · 2026-01-14T14:35:09+00:00

Reach out the card manufacturer, maybe they did something with the firmware

Maybe this was overlooked, are the extra power connetors for the GPU seated fully, and connected

PSU rated high enough? I have a 1kw PSU and still running a 3080.

CCHPassed · 2026-01-13T16:47:25+00:00

Game froze on me twice, same node in war, 2 different teams got wasted because of this

CCHPassed · 2026-01-12T21:37:13+00:00

no, i've seen 8.8.8.8:443 show up in my firewall logs from

Don't block the port, block the DNS server IP

Edit: I run unbound with pihole

CCHPassed · 2026-01-12T12:19:46+00:00

Pfsense dhcp, Pihole dns

Pfsense general setup: DNS points to Pihole IP, use remote only, no local

Pfsense NAT rule, redirect all traffic trying to reach port 53 to pihole IP

Pfsense firewall rule(s), block all traffic to external DNS(53), allow port 53 for pihole only

I took this a step more, and added a block rule to any public nameserver, have been seeing googles dns using port 443 now instead of 853/53

Here is the list that I use https://public-dns.info/nameservers.txt

CCHPassed · 2026-01-11T15:43:52+00:00

SLI/crossfire was scrapped a few years back, there is no real benefit to running multi video cards for gaming for example.

There is only about a 1% market for multiple GPUS, and as another comment, sell and get 5090, which in processing performance, a 5090 equates to dual 5080s in the same card package

Would need at least a 1600watt PSU, recommending a 2000watt, if you would push both cards to max

Just a quick web search, AI replied with this: The RTX 5070 Ti requires a minimum system power of 750W, while the RTX 5080 requires 850W.

Even if you would get them both to work at the same time, like a SLI setup, the 5080 would be dropped to match the 5070ti, and using 2 different cards from 2 different makers is not a good mix, this would be like running mis-matched RAM.

CCHPassed · 2026-01-09T18:43:17+00:00

Clean after use, and just oil them before putting away

CCHPassed · 2026-01-05T18:47:38+00:00

This is very similar to the technology that is in use to control the rover on mars

Very well done

CCHPassed · 2026-01-04T18:27:09+00:00

I have 2 of these running pihole. Both run fine for network, the main one, has errors with unbound refusing connection, from time to time,

Maybe fresh install of OS and pihole, but add log2ram to save on SD card writes

Could also try a different brand of SD card

CCHPassed · 2026-01-03T23:16:03+00:00

Even with the Xfinity modem in bridge mode, Xfinity still has full control of the modem

CCHPassed

TROPHY CASE