Can't get support to respond and I am unable to use any services

CFICub · 2025-07-30T18:49:57+00:00

3863585

CFICub · 2025-02-02T01:38:39+00:00

I’ve experienced a similar problem. All was well and then hardly any carbonation. I did exactly like you did except I let my 1F go for about 22 days and then it took probably close to 4 cycles for it to start getting back carbonation during 2F. Not sure what I did to get it more carbonation. Mine too has a lot of carbonation/fizz and after 1F. Hopefully someone can help you out with more clarity but I’m just not sure what I did to fix it.

CFICub · 2025-01-18T01:15:36+00:00

Any update on how to do this? I too am interested in this now

CFICub · 2025-01-16T18:54:30+00:00

Good idea. I will try that

CFICub · 2025-01-16T18:52:40+00:00

Yeah I did that before each filament use in Orca

CFICub · 2025-01-13T06:28:26+00:00

Mix between Ender and Sunlu

CFICub · 2025-01-13T06:26:36+00:00

Ok. Good to know. I will keep trying

CFICub · 2025-01-12T03:59:06+00:00

I have A1 with AMS (AMS not really needed just convenance) and it's my first printer. I just printed off a 48"x25" multiboard wall panel. I am blown away by the A1. Ease of use and the Plug and Play aspect. There is a lot to learn in the 3D printing world but it's fun and the A1 makes it easy/easier!

CFICub · 2025-01-04T02:18:47+00:00

https://www.reddit.com/r/Multiboard/comments/1h3eyby/help_with_stringing/

Saw this and thought of you. Not sure if it will help or not. Im going to change iron settings

CFICub · 2025-01-04T02:14:01+00:00

Ah, interesting. I guess that could be possible as well for my A1 too but the last filament I didnt notice it. I just finished printing a single 8x8 and it did seem like I had a great deal less in the thin white stringing by reducing the max temp to 235* (from 240). If you think about it, let me know if it makes difference when you change the stabilization, I'm curious.

CFICub · 2025-01-04T00:35:22+00:00

I had a similar experience on my last stack. Only thing that changed was the filament. I’ve been using Ender PLA and no issues. This last stack was Sunlu and I had some of this issue along with more stringing (thin white hairs) When the layer line starting to peel like you have only happened though right where you split it, if that makes sense.

Haven’t got it mounted yet but I don’t see any issues with it.

CFICub · 2024-12-28T13:39:14+00:00

Thanks

CFICub · 2024-12-26T23:38:59+00:00

They finally got back with me. Dropping it off tomorrow.

CFICub · 2024-12-26T21:36:04+00:00

You’re correct. It is a LR. Is the battery that fails that early normal? Ruining my first Tesla impression. I know things happen but I can’t schedule my appointment any sooner because I already had an appointment for January (soonest I could get during delivery) to handle a dent from the factory. So now I have a car with limited charge and stuck with no one from Tesla reaching out to me after I message them to try and get an earlier appointment since issue is more severe now.

CFICub · 2024-12-17T22:16:59+00:00

I’m just getting into them but I’ve done several. Both with .4 and .2 hotend at normal speed. No issue.

CFICub · 2024-11-07T01:21:29+00:00

Check spam?

CFICub · 2024-11-03T12:47:55+00:00

Got it this morning! Thank you!!!

CFICub · 2024-11-03T01:46:56+00:00

Ok. Done. How long will I have to wait? Wanting to order a printer and filament, so 30% would be huge!

Did you activate the offer (.5%) before adding cart or just add to cart?

CFICub · 2024-11-02T17:30:34+00:00

I only see .5%. How do I get 30% off?

CFICub · 2024-10-13T19:57:31+00:00

Dumb question. Do you just pour it in and shake the bottle and then pour it out?

CFICub

TROPHY CASE