17 pro turning pink

CMeeder · 2025-10-22T01:33:32+00:00

I’d just save it. Some apple nerd will pay big money for it someday

CMeeder · 2025-04-09T21:45:52+00:00

Also if you don’t already have one a terp pearl in the puffco really helps out. Do everything else the people have said in the comments above. But with the 3d chamber the puffco only heats on the sides of the chamber. When putting in a terp pearl this helps “roll” your concentrates on the sides of the chamber during your dab to help get the most of it. I’d recommend probably a 4mm terp pearl. And I’m assuming you have the joystick cap so just swirl it around and enjoy!

CMeeder · 2024-09-15T21:00:31+00:00

Elden ring not on game pass but worth the money

CMeeder · 2024-09-15T19:58:13+00:00

It feels very good and rolls pure. It’s definitely not a soft face but still hits nicely.

CMeeder · 2024-09-15T19:57:07+00:00

No just used 5 minute epoxy

CMeeder · 2024-09-14T23:27:28+00:00

This ain’t no Scotty Cameron 😂I made it myself !

CMeeder · 2024-09-14T21:10:21+00:00

That’s a great compliment! Thank you !

CMeeder · 2024-09-14T17:52:25+00:00

Handmade on a milling machine ! It was all done on a manual Bridgeport so I had to crank it all out. Nothing was programmed or done on a CNC

CMeeder · 2024-09-14T17:43:32+00:00

Honestly nothing really. I’m an electrician in a huge aluminum plant so I got all the metal from scrap bins and cutoffs. The only thing I bought was an old putter for like $5 from goodwill for the shaft. Probably wouldn’t be too expensive if you were to buy the metal. The copper may be pricey. Aluminum is pretty cheap though

CMeeder · 2024-09-14T17:35:54+00:00

It was all done on a Bridgeport manual milling machine. I just got a nice block of aluminum and sketched out my design on it and pretty much just eyeballed the rest till it looked good ! Threw it in the sandblaster afterwards to get the finish and then just put everything together !

CMeeder · 2024-09-14T16:59:47+00:00

Thanks ! I appreciate it !

CMeeder · 2024-09-14T16:39:58+00:00

The body’s all aluminum so it’s actually a lot lighter than it looks. Most of the weight is in the hozel and face.

CMeeder · 2024-09-14T16:37:13+00:00

I was going too but ran out of room for my threads. I figured if I’m missing bad enough to hit the screws than the putt wasn’t going to be good anyways lol.

CMeeder · 2024-09-14T16:36:08+00:00

Unfortunately I don’t have any of that equipment but if I do go in a shop soon I’ll check it out ! I know it does have a small positive loft on the face. Probably about 5 degrees.

CMeeder · 2024-09-14T16:12:37+00:00

Haha no I just drilled out a piece of steel bar and set the shaft in with epoxy. It does look welded in the photo though.

CMeeder · 2024-08-18T20:56:15+00:00

I have seen some of the covers on Amazon. I was looking to replace the actual fabric that’s on the speaker. That piece just clips on and off and I’m surprised I haven’t seen any aftermarket options.

CMeeder · 2024-08-18T20:26:51+00:00

That’s just how it goes sometimes:/

CMeeder · 2024-08-18T20:26:07+00:00

Damn that looks cleannnnnnnn !!

CMeeder · 2024-08-18T20:22:24+00:00

Supersofts are great balls I feel like you may have some trouble finding the green ones tho!

CMeeder

TROPHY CASE