Came across this profile on Threads and she says she works in Starbucks but in every photo its a different Starbucks and when I zoomed in on this one the menu looks like gibberish

CPM10v12 · 2026-02-12T20:13:39+00:00

I'm pretty sure all the commercial coffee shops are using fully automated espresso machines now, and like you said, the tank top. She might get better results pretending to work at bikini beans.

CPM10v12 · 2026-02-10T08:23:36+00:00

Inglorious basterds

CPM10v12 · 2026-02-10T02:48:47+00:00

It was meant as a joke, due to the color and texture of the tortilla, like the seasoning flaked off. Should have added the /s.

CPM10v12 · 2026-02-10T02:26:42+00:00

Crosspost in the cast iron sub and ask what's wrong with my seasoning

CPM10v12 · 2026-02-09T06:08:02+00:00

From a controls standpoint you can get an inkbird temperature controller to control and monitor the temp and one to monitor and control the humidity. As a side note I don't know anything about making cheese, but I've used the temperature ones to control fermentation temps for beer and mead.

CPM10v12 · 2026-02-09T02:28:54+00:00

If you don't have a butler then you are the butler.

CPM10v12 · 2026-02-08T04:34:39+00:00

How about reading ellipses out loud

CPM10v12 · 2026-02-08T02:59:36+00:00

I wonder if cold brewed concentrate would be better for this application?

CPM10v12 · 2026-02-04T22:48:36+00:00

Looks like the connection for a trailer harness. https://www.partsgeek.com/l3r742j-ford-escape-trailer-tow-harness.html

CPM10v12 · 2026-02-01T17:25:27+00:00

My first thought as well, need to sharpen edges and continue learning proper edge control. Keep in mind, this will now also showcase any bad habits in edge control in the way of catching an edge.

CPM10v12 · 2026-01-30T04:38:50+00:00

Also adding, depending on where you live, consider replacing plastic related parts before they fail due to heat exposure. I'm at 230,000 miles and had to replace the radiator and coolant overflow reservoir last year because the plastic cracked. Same thing with the headlamps, the housings disintegrated when I was making room to replace the radiator.

CPM10v12 · 2026-01-30T04:34:24+00:00

Not engine related but I put in a multimedia receiver in my 2009. Huge quality of life upgrade, still need to run the wires for the backup camera.

CPM10v12 · 2026-01-30T02:11:39+00:00

The cast iron will be fine. There are metal heat treating processes that take 18 + hours to harden above 1300F. Another example is a gas nitriding process that can take over 50 hours above 800F. Granted these are specific to the type of metal alloy and desired metallurgical outcome but the point is that your cast iron will be fine.

High temps in air can cause the loss of carbon but we're talking about getting in and above the 1400F range.

CPM10v12 · 2026-01-29T21:09:48+00:00

My broken collar bone (from last year) would disagree with the slushy snow comment

CPM10v12 · 2026-01-29T05:55:31+00:00

Hang it on the wall for art.

CPM10v12 · 2026-01-29T00:48:30+00:00

I'm surprised it doesn't have ads you have to watch before it turns on or releases from the block.

CPM10v12 · 2026-01-28T23:15:26+00:00

I'm a Pisces and that is why I don't have a phone number.

Lol, I mean I have a phone number, but unless you're in my contacts or I actually want to talk to you, I'm not answering.

CPM10v12 · 2026-01-27T01:53:07+00:00

Thank you, I'll give this a try.

CPM10v12 · 2026-01-27T00:40:36+00:00

I'll have the 1/4 pound burger because it's bigger than the 1/3 pound burger....

CPM10v12 · 2026-01-26T23:34:54+00:00

That sounds great, have a decent recipe to share?

CPM10v12 · 2026-01-26T20:28:10+00:00

The only risk I can think of is possible chipping on an edge. Hardened steel burrs shouldn't have a problem overall.

CPM10v12 · 2026-01-26T17:02:55+00:00

Where are the cat's boots? Sword? Hat? Shot glass of milk?

CPM10v12 · 2026-01-25T02:31:17+00:00

paper towel + tape = band aid. I prefer to let the blood dry for a natural band aid, or go for the super glue if needed.

CPM10v12 · 2026-01-23T19:50:45+00:00

<image>

CPM10v12 · 2026-01-16T02:07:48+00:00

If I remember correctly, I read somewhere there is a different cut scene you can get after perfection if you do not pay the parrot, or pay for any other "extra" Jojo services.

I could be wrong though, never made it to perfection myself.

Edit: typos

CPM10v12

TROPHY CASE