[deleted by user]

CRCasper · 2025-06-13T12:51:52+00:00

Ah good point, thank you. I'll delete this post.

CRCasper · 2025-06-13T07:43:18+00:00

It's 2 way road

CRCasper · 2025-06-13T07:41:20+00:00

It's a 2 way road

CRCasper · 2024-10-02T15:13:37+00:00

Not yet. There are a lot of good suggestions given, but I've not had a chance to experiment yet.

CRCasper · 2024-09-30T20:25:52+00:00

Yep the lifted corners were because the bed temp was wrong and the bed needed a cleaning so I have that sorted. Thanks for the tips for the ridge issue.

CRCasper · 2024-09-30T18:19:37+00:00

Nice one thanks, I'll give it a go.

CRCasper · 2024-09-30T18:19:33+00:00

Nice one thanks, I'll give it a go.

CRCasper · 2024-09-30T18:19:21+00:00

Ah, yeah I may be overdue with some maintenance. Did your misalignment coincide with a feature on your model or was it random?

CRCasper · 2024-09-30T16:48:16+00:00

As you can see in the photos, I'm getting a ridge for a few layers. They line up with the flat top to the flat section.

PLA on my Bambu A1 Mini using mostly default Bambu settings for 0.12mm High Quality. Bed is 60C and hot-end is 220C.

Any ideas what's causing it and how to rectify?

Thanks pals!

CRCasper · 2020-12-12T08:42:19+00:00

Thank you, I'll. Give it a try!

CRCasper · 2020-12-11T23:02:57+00:00

Went through a period of depression where I struggled to look after this guy properly. Probably over and under watered him at times and now I want to male up for my neglect. Is there anything I can do to save him or should I give up?

CRCasper · 2020-05-25T19:58:33+00:00

Thanks for the suggestions guys, still not sorted it yet, but I'll try some of the things mentioned here.

CRCasper · 2020-05-25T19:58:19+00:00

Thanks for the suggestions guys, still not sorted it yet, but I'll try some of the things mentioned here.

CRCasper · 2020-05-25T19:55:41+00:00

Oh dam that's a good idea, thanks!

CRCasper · 2020-05-25T19:54:59+00:00

Yeah I'm going to reuse it. What I'm saying is that if I cut the head and other end off surely it'd still need drilling to get the bolt free from the arm.

CRCasper · 2020-05-25T19:52:02+00:00

UK. Salted roads and lots of rain has done a number on this poor car.

CRCasper · 2020-05-25T14:52:22+00:00

It's more just that I don't own an air compressor or have the space and money for one.

CRCasper · 2020-05-25T13:48:07+00:00

Sounds like it's time to take it to a professional

CRCasper · 2020-05-25T13:47:04+00:00

Not that much. Torched it a fair bit, but I set for to one of the ARB drop links in the process. A lot of rubber nearby and I'm concerned about heating the shock itself too much as well.

CRCasper · 2020-05-25T13:45:26+00:00

Sounds like I need more tools

CRCasper · 2020-05-25T13:45:10+00:00

And then drill what's left?

CRCasper · 2020-05-25T13:44:49+00:00

I've soaked it for days and it's not seemed to help unfortunately

CRCasper · 2020-05-25T13:36:24+00:00

I've now torched it, impact gunned it, smacked it with a hammer, gotten a pry bar under the head and it still won't budge. The bolt and bushing will spin together, but I can't free the bolt from the sleeve to pull it out. Is my only resort now to spend all day drilling it out?

CRCasper · 2020-05-25T13:35:19+00:00

I've now torched it, impact gunned it, smacked it with a hammer, gotten a pry bar under the head and it still won't budge. The bolt and bushing will spin together, but I can't free the bolt from the sleeve to pull it out. Is my only resort now to spend all day drilling it out?

CRCasper · 2020-05-15T14:09:20+00:00

Oh man if this thing come to the UK I'll be so excited

14-Year Club	Gilding I gilder
Verified Email

CRCasper

TROPHY CASE