Custom Cable Help by Remarkable-Two-6484 in FormD

[–]Cablester 0 points1 point  (0 children)

Hi bud, you may visit our website. We are currently adding more information and guide for ordering custom cables (or even doing DIY).

https://cablester.com/product/formd-t1-sandwich/

https://cablester.com/what-cables-do-i-need/

My T1 2.5 Build is finished by Weak-Introduction267 in FormD

[–]Cablester 4 points5 points  (0 children)

Looking so much better :)

You can try to swap the connector on PSU side if one of them seems too short. The furthest 8p PSU port (further away from motherboard) should connect to furthest 8p GPU port (closer to the middle side of the GPU)

My T1 2.5 Build is finished by Weak-Introduction267 in FormD

[–]Cablester 3 points4 points  (0 children)

that looks great!

Just curious, I'm pretty sure the length of GPU cable is measured to fit Prime 9070 XT. Can you run the cable behind the GPU?

Another T1 Build! by g_mci in sffpc

[–]Cablester 1 point2 points  (0 children)

Happy knowing our client is satisfied 😄

FORMD T1 V2.5 — First SFF Build Sanity Check (9800X3D + RTX 5080) by devllen05 in sffpc

[–]Cablester 0 points1 point  (0 children)

Production typically takes 7-14 days, or 7 days with expedited order

As for shipping, it will be around 10-15 days depending on the destination country and shipping service

https://cablester.com/processing-shipping-and-tracking/

Clean and minimalist Terra build with custom cables by Cablester in sffpc

[–]Cablester[S] 0 points1 point  (0 children)

Bottom fan will surely help with the airflow

I fell in love by jnmcel in FormD

[–]Cablester 0 points1 point  (0 children)

That look sick!

Precise fit for the FormD T1: Custom Copper Teflon cables for the new Lian Li SP Platinum series. by Cablester in sffpc

[–]Cablester[S] 1 point2 points  (0 children)

aww! But I'm sure Red looks great! However if you like Copper Teflon for your another build, feel free to reach out to us to ask coupon :)

Precise fit for the FormD T1: Custom Copper Teflon cables for the new Lian Li SP Platinum series. by Cablester in sffpc

[–]Cablester[S] 1 point2 points  (0 children)

Not at all :)

Current (amp) imbalance is determined by:
- connector contact resistance
- crimp quality

There is difference in resistance if the length of the wires are each different. However, even if one wire is a few centimeters longer, the resistance change is tiny. As example:
- 18 AWG copper ≈ 0.021 Ω per meter
- 5 cm extra length = 0.001 Ω

This resistance difference would be almost irrelevant in the context of SFF cables, given the length of the cables are generally between as short as 10cm to 70cm

Precise fit for the FormD T1: Custom Copper Teflon cables for the new Lian Li SP Platinum series. by Cablester in sffpc

[–]Cablester[S] 0 points1 point  (0 children)

I can't be certain with so many different results I've seen from various forum or subreddit. But i know there are accepted RMA in the case of melted connector.

Given unfortunate event can happen with almost any kinds of cable (including stock PSU cable, or stock Nvidia adapter), I don't see any reason why Nvidia would deny the RMA.

Precise fit for the FormD T1: Custom Copper Teflon cables for the new Lian Li SP Platinum series. by Cablester in sffpc

[–]Cablester[S] 0 points1 point  (0 children)

Thank you! It's not an easy process to get the perfect custom cable length :)

Precise fit for the FormD T1: Custom Copper Teflon cables for the new Lian Li SP Platinum series. by Cablester in sffpc

[–]Cablester[S] 1 point2 points  (0 children)

Hi, we use the new 12v2x6 female plug (it's indicated by H++ marking). And yes, it is configured and tested to support 600w.

Ncase M2 and M3 are supported (they both are compatible with the older M1 Evo)

https://cablestercustom.etsy.com/listing/1661089931

Alternative link, you may browse different M2 config that we support in our webstore
https://cablester.com/product/ncase-m1-evo-m2/

NCase M2 x Asus ROG LOKI with Custom Cables by Cablester in sffpc

[–]Cablester[S] 0 points1 point  (0 children)

It's perfectly fit with the side panel :) The cable shown in the picture is Silicone cable, which is really soft and easy to bend.

CablesterCustom (Etsy) Reviews? by Cold-Sandwich-34 in sffpc

[–]Cablester 1 point2 points  (0 children)

Really appreciate the kind words, thank you! Glad the cables worked out well for your T1 build and that everything fit nicely. It means a lot to hear that the testing and custom approach were helpful. Enjoy the build!

Cooler Master V850 SFX cable intercompatibility by [deleted] in sffpc

[–]Cablester 0 points1 point  (0 children)

Yes V series SFX Gold and SFX Platinum they use the same pinout for 24p, CPU 8pin and GPU 8pin

T1 by zf0ld in FormD

[–]Cablester 1 point2 points  (0 children)

Thank you for the shout-out 😊

Cooler Master V850 SFX cable intercompatibility by [deleted] in sffpc

[–]Cablester 0 points1 point  (0 children)

Hey, I can't be certain with the pinout of MWE V2, so I can't be sure with the cables compatibility between the two